*DECK     CSSADL
USETEXT TEXTCS; 
USETEXT TEXTSS; 
USETEXT TXCMDCS;
USETEXT TXTAPSS;
USETEXT TXTSUSS;
USETEXT TXTSMCS;
PROC CSSADL;
# TITLE CSSADL - ACTION DUMP LOAD COMMAND. #
  
      BEGIN # CSSADL #
  
# 
**    CSSADL - ACTION DUMP LOAD COMMAND.
* 
*     C. BRION          82/05/26. 
* 
*     THIS PROCEDURE PROCESSES THE DUMP OR THE LOAD COMMAND.
*     THE NPU INITIALIZE SM MAY BE SENT TO THE NPU AND/OR 
*     A SUPERVISION EVENT TO LOG THE COMMAND MAY BE SENT TO 
*     THE EVENT PROCESSOR.
* 
*     PROC CSSADL 
* 
*     ENTRY:  
*       THE ROUTED COMMAND HAS BEEN EXTRACTED FROM THE ROUTED COMMAND 
*       QUEUE AND STORED INTO THE COMMON STORAGE AS FOLLOWS:  
*         WCBUF = ONE WORD ENTRY WORD COUNT.
*         HDRCMD = ONE WORD COMMAND HEADER DESCRIPTOR.
*         PARMS = ARRAY THAT CONTAINS THE COMMAND TEXT, THE SYNTAX
*                 PARAMETER LIST AND THE ADDRESS PARAMETER LIST.
* 
*     EXIT: 
*       A NPU INITIALIZATION SM MAY BE SENT.
*       A SUPERVISION EVENT TO LOG THE COMMAND MAY BE SENT. 
*       THE NPUCB DUMP AND LOAD REQUEST FLAGS MAY BE UPDATED. 
* 
# 
  
  
# 
****  PROC CSSADL XREF LIST 
# 
  
      XREF
        BEGIN 
        PROC SSTAQE;                     # SS - ACCEPT QUEUE ENTRY #
        PROC MESSAGE;                    # MACREL MSG TO DAYFILE #
        PROC ABORT;                      # MACREL ABORT # 
        PROC MOVE;                       # MACREL MOVE MEMORY # 
        END 
  
# 
****
# 
  
# 
*     DEFS
# 
  
      DEF NPUIDX # HDR$TXWCNT[0] + 2 #;# INDEX INTO PARAM LIST FOR NPU #
  
  
# 
*     ITEMS 
# 
  
      ITEM BEGAPIX      U;               # START ADDR PARAMETER INDEX # 
      ITEM BEGNPU       I;               # STARTING NPUCB ORDINAL # 
      ITEM ENDNPU       I;               # ENDING NPUCB ORDINAL # 
      ITEM I            U;               # LOOP VARIABLE #
      ITEM BEGSYIX      U;               # START INDEX OF SYNLIST#
      ITEM FINSYIX      U;               # END INDEX OF SYN LIST #
      ITEM FINALIX      U;               # LAST ADDR PARAMETER INDEX #
      ITEM MATCH        B;               # MATCH INDICATOR #
      ITEM NPUORD       U;               # NPU ORDINAL #
      ITEM ONF          B;               # ON FLAG INDICATOR #
      ITEM OFFF         B;               # OFF FLAG INDICATOR # 
      ITEM MOVCNT       U;               # MOVE CHAR COUNT #
  
  
  
  
  
  
# 
*     SET THE INITIAL ADDRESS PARAMETER LIST BEGINNING AND ENDING 
*     INDEX.
# 
  
      BEGAPIX = HDR$SPCNT[0] + HDR$TXWCNT[0]; 
      FINALIX = BEGAPIX + HDR$APCNT[0]; 
      BEGSYIX = HDR$TXWCNT[0];
      FINSYIX = BEGSYIX + HDR$SPCNT[0]; 
  
# 
*     CLEAR THE OUTGOING SM STORAGE AREAS.
# 
  
      WCB$WORD[1] = 0;
      ABHWORD[1] = 0; 
      SPMSG0[1] = 0;
  
  
# 
*     IF THIS COMMAND IS FOR ONLY ONE NPU, THEN SEARCH FOR THE NPUCB
*     ORDINAL IN THE ADDRESS PARAMETER LIST AND SET THE BEGINNING AND 
*     ENDING NPU ORDINAL TO THE ORDINAL IN THE PARAMETER LIST.
* 
# 
      IF PAR$PCODE[NPUIDX] EQ "NP0" 
      THEN
        BEGIN 
  
        FOR I = BEGAPIX STEP 1 WHILE (I LS FINALIX
          AND PAR$PCODE[I] NQ "NOR")
        DO
          BEGIN 
          END 
        BEGNPU = PAR$ORD[I];
        ENDNPU = BEGNPU;
        END 
  
# 
*     IF THIS COMMAND IS FOR MULTIPLE NPUS, THEN SET THE BEGINNING AND
*     ENDING NPUCB ORDINALS TO BE THE FIRST AND LAST NPU CONTROL
*     BLOCK.
# 
      ELSE
        BEGIN 
        BEGNPU = 0; 
        ENDNPU = CSNPCNT - 1; 
        END 
  
  
  
# 
*     CHECK ADDRESS PARAMETER LIST FOR THE PRESENCE OF THE ON OR OFF
*     KEYWORDS. 
# 
  
      OFFF = FALSE; 
      ONF = FALSE;
      FOR I = BEGSYIX STEP 1 WHILE (I LS FINSYIX
        AND NOT ONF 
        AND NOT OFFF) 
      DO
        BEGIN 
        IF PAR$PCODE[I] EQ "ON0"
        THEN
          ONF = TRUE; 
        ELSE IF PAR$PCODE[I] EQ "OFF" 
        THEN
          OFFF = TRUE;
        END 
  
  
      NPIDPP[1] = O"116"; 
      IF ONF
      THEN
        NPIDPP[1] = O"131";             # SET TO ASCII Y #
  
# 
*     PREPARE THE OUTGOING NPU INITIALIZATION SM. 
# 
  
      IF HDR$VERB[0] EQ "LO0"          # IF LOAD, SET NPI IN PFCSFC # 
      THEN
        BEGIN 
        PFCSFC[1] = NPIIN;
  
        IF NOT ONF AND
           NOT OFFF 
        THEN
          BEGIN 
          NPIDPP[1] = 0;
          END 
        END 
      ELSE
        BEGIN 
        PFC[1] = NPI; 
        SFC[1] = DP;
        END 
  
      ABHABT[1] = APPSUP; 
      ABHBT[1] = APPSUP;
      ABHACT[1] = ACTCSNP$; 
      ABHTLC[1] = NNPI; 
      WCB$WC[1] = LNPI + 2; 
      WCB$SMID[1] = SMID"NPIIN";
  
# 
*     FOR EACH NPUCB SPECIFIED BY THE BEGINNING AND ENDING ORDINALS.
# 
      FOR NPUORD=BEGNPU STEP 1 UNTIL ENDNPU 
      DO
        BEGIN 
        NPU$DMPF[NPUORD] = FALSE; 
  
  
# 
*     THE NPU STATE SHOULD BE SUPERVISED. IF SO AND THE DUMP
*     ON KEYWORD SPECIFIED, SET THE DUMP OPTION TO ASCII Y IN THE NPU 
*     INITIALIZATION SM TO BE SENT. OTHERWISE, SET THE DUMP OPTION TO 
*     ASCII N. IN EITHER CASE SEND THE NPU INITIALIZATION SM TO THE 
*     OUTGOING TRAFFIC QUEUE. 
# 
  
        IF NPU$STAT[NPUORD] EQ SUPSTAT"SUP" 
        THEN
          BEGIN 
  
          ABHDN[1] = NPU$NID[NPUORD]; 
          ABHSN[1] = NPU$HID[NPUORD]; 
          SSTAQE(P<OTQ>,WCBUF[1],ABH[1],CSSM[1]); # SEND SM # 
          END 
  
# 
*     CHECK IF NPU IS IN A NCF MISMATCHED STATE. IF SO, SET THE LOAD
*     REQUEST FLAG SINCE THIS MUST BE A LOAD COMMAND FROM THE HOP. A
*     SUBSEQUENT SUP/IN SM FROM THE NPU WILL CAUSE THE NEW LOAD REQUEST 
*     FLAG TO BE SENT TO THE NPU IN THE SUP/IN/A SM.
*     SET THE DUMP FLAG ALSO IF SO INDICATED FROM THE DUMP ON KEYWORD 
*     IN THE COMMAND. 
# 
  
        ELSE IF (NPU$STAT[NPUORD] EQ SUPSTAT"NCFMIS" OR 
                 NPU$STAT[NPUORD] EQ SUPSTAT"LEVMIS") AND 
                HDR$VERB[0] EQ "LO0"
        THEN
          BEGIN 
          NPU$LRF[NPUORD] = TRUE; 
          IF ONF
          THEN
            NPU$DMPF[NPUORD] = TRUE;
          END 
        END 
  
# 
*     PREPARE THE COMMAND TEXT PRECEEDED BY THE OPERATOR TERMINAL 
*     NAME FOR THE LOG FILE. THE LOG FILE ENTRY IS SENT AS A
*     SUPERVISION EVENT TO THE EVENT PROCESSOR. 
  
# 
      WCB$WORD[1] = 0;
      ABHWORD[1] = 0; 
      WCB$SMID[1] = SMID"CMDTXT"; 
      WCB$WC[1] = HDR$TXWCNT[0] + 4;
      ABHTLC[1] = (HDR$TXWCNT[0] + 2) * 10; 
      CMD$TNAM[0] = OC$TNAM[HDR$OPORD[0]];
      MOVCNT = HDR$TXWCNT[0]; 
      P<MSCMD> = LOC(CMD$TEXT[0]);       # SET UP FOR MOVE #
      MOVE(MOVCNT,PARMS[0],MSCMD[0]);    #MOVE TEXT INTO BUFFER#
      SSTAQE(P<EVQ>,WCBUF[1],ABH[1],CMDLINE[0]);
  
# 
*     NOW SEND THE NULL TERMINAL TEXT ENTRY TO THE OPERATOR WHICH WILL
*     CAUSE THE READY.. MESSAGE TO BE SENT TO THE OPERATOR. 
# 
  
      WCB$WORD[1] = 0;
      ABHWORD[1] = 0; 
      WCB$SMID[1] = SMID"TTEXT";
      WCB$WC[1] = 2;
      WCB$IAF[1] = TRUE;                 # SET INPUT ALLOWED #
      ABHADR[1] = HDR$OPORD[0]; 
      ABHTLC[1] = 0;                     # ZERO LENGTH TTEXT #
      SSTAQE(P<CNQ>,WCBUF[1],ABH[1],CSSM[1]); 
  
      END # CSSADL #
 TERM