*DECK NLOBCH
USETEXT AHEADER 
USETEXT BPIPBUF 
USETEXT DBGBUF
USETEXT DRHDR 
USETEXT NBT 
USETEXT NHEADER 
USETEXT NIPDEF
USETEXT OVERLAY 
USETEXT PARAMP
USETEXT SUPMSG
USETEXT SYSTIME 
PROC NLOBCH(BUFAD,ERRORF);
#     LINK MESSAGE TO PIP OUTBOUND CHAIN                               #
  
 STARTIMS;
 #
*1DC  NLOBCH
* 
*     1. PROC NAME           AUTHOR              DATE 
*        NLOBCH              E.T.WAN             81/06/08 
*                            L.T.NGUYEN          81/09/30 
* 
*     2. FUNCTIONAL DESCRIPTION 
*        LINK SM REG/CP AND MESSAGES FROM NS,CS TO PIP OUTBOUND BUFFER. 
* 
*     3. METHOD USED
*        CHECK THAT THERE IS A CORRECT NBT ENTRY FOR THE SPECIFIC 
*        COUPLER. 
*        CHECK NPU OFF FLAG, ACTIVE FLAG, DOWN FLAG, BOOTSTRAP FLAG, AND
*        LLK FLAG TO ALLOW SUITABLE MESSAGES TO BE LINKED.
*        CONVERT APPLICATION HEADER TO NETWORK HEADER.
*        LINK MESSAGE TO PIP OUTBOUND CHAIN.
* 
*     4. ENTRY PARAMETERS 
*        BUFAD               MESSAGE BUFFER ADDRESS 
* 
*     5. EXIT PARAMETERS
*        ERRORF 
* 
*     6. COMDECKS CALLED
*        AHEADER
*        DRHDR
*        NBT
*        NHEADER
*        NIPDEF 
*        SUPMSG 
* 
*     7. ROUTINES AND OVERLAYS CALLED 
*        NXBLINK             LINK MESSAGE ON PIP OUTBOUND CHAIN 
*        XTRACE              TRACE CALLS
* 
*     8. DAYFILE MESSAGES AND OTHER IMPORTANT INFORMATION 
*        THIS PROCEDURE IS CALLED BY HPPUT AND NCREGCP. 
* 
 #
 STOPIMS; 
  
# 
****  EXTERNAL ENTRY POINTS 
# 
  
      XREF
        BEGIN 
        PROC MRELS;          # RELEASE BUFFER SPACE                    #
        PROC NXBLINK ;       # LOG MESSAGE INTO PIP OUT                #
  
        PROC XTRACE;         # RECORD TRACES                           #
        END 
  
#     LOCAL VARIABLES                                                  #
  
      ITEM BUFAD;            # BUFFER ADDRESS                        #
      ITEM ERRORF ;          # ERROR FLAG                              #
      ITEM CNODE;            # COUPLER NODE                            #
      ITEM I;                # LOOP CONTROL VARIABLE                   #
      ITEM IND;              # INDEX                                   #
      ITEM INDX;             # INDEX                                   #
      ITEM TEMP;             # SAVE APPLICATION BLOCK HEADER           #
      ITEM FOUND B ;         # MATCHED NPU FLAG                        #
      ITEM TEMPDN ;          # TEMPORARY DEST. NODE                    #
  
#*********************************************************************# 
  
  
  
  
  
      BEGIN # NLOBCH #
      CONTROL IFEQ DEBUG,1; 
        XTRACE("LOBCH") ; 
      CONTROL FI; 
  
      P<DRHDRWD> = 0;        # DATA BLOCK HEADER ADDRESS               #
      P<SUPMSG> = BUFAD + DBHSIZE + ABHSIZE;  # SM ADDRESS             #
      P<AHEADER> = BUFAD + DBHSIZE;       # APPLICATION HEADER ADDR    #
      CNODE = ABHSN[0];      # COUPLER NODE                            #
      P<SMNIP> = P<SUPMSG>; 
      TEMPDN = ABHDN[0] ;    # DESTINATION NODE                        #
      FOUND = FALSE;
      ERRORF = 0;            # INITIALIZE ERROR FLAG                   #
  
      FOR I = 0 STEP NBTFETNO WHILE I LQ NBTMAXID 
                                    AND NOT FOUND 
      DO
        BEGIN                # SEARCH FOR NBTE WITH HN = COUPLE        #
        IF NBTHN[I] EQ CNODE
           AND NBTIUF[I]
        THEN
          BEGIN              # FOUND THE ENTRY                         #
          FOUND = TRUE ;
          IND = I;    # SAVE INDEX                                     #
          END 
        END                  # SEARCH FOR NBTE WITH HN = COUPLR        #
  
      I = IND;
      INDX = I+4;            # INDEX INTO PIP FLAGS IN NBT 5TH FET     #
  
      IF FOUND               # ACTIVE NBT EXISTS FOR THIS HN           #
      AND NOT NBTOF[INDX]  # NPU NOT OFF IN EST                        #
      AND ((NBTAF[INDX]  # NPU ACTIVE                                  #
      AND NOT NBTMF[INDX])  # AND SAMP IS NOT RUNNING                  #
      OR (PFC EQ NPU         # NS DUMP-LOAD SM                         #
      AND CNODE  EQ TEMPDN  # FOR LOCAL NPU-S WHICH IS                 #
      AND (NOT NBTAF[INDX]  # NOT ACTIVE AND SAMP NOT LOADED           #
      OR NBTDF[INDX]))  # OR IS IN NPU DUMP-LOAD PHASE                 #
      OR (NBTLF[INDX]  # PIP WAITING FOR REG/CP RESPONSE               #
      AND PFCSFC[0] EQ REGCP  # REG/CP RESPONSE TO PIP ALLOWED         #
      AND REGR[0]))  # RESPONSE BIT IS ON                              #
      THEN
        BEGIN 
  
        # CONVERT ABH TO NETWORK HEADER                                #
  
        TEMP = ABHWORD[0];  # SAVE APPLICATION HEADER                  #
        ABHWORD[0] = 0;  # CLEAR APPLICATION HEADER                    #
        P<NHEADER> = BUFAD + DBHSIZE;  # NETW HEADER ADDR              #
        P<AHEADER> = LOC(TEMP);  # APPLICATION HEADER                  #
        DN[0] = TEMPDN;  # DESTINATION NODE                            #
        SN[0] = CNODE;  # SOURCE NODE                                  #
        CN[0] = 0;
        BT[0] = NETCMD;  # BLOCK TYPE                                  #
        NHACT[0] = ABHACT[0];  # CHARACTER TYPE                        #
        CC[0] = ABHTLC[0];  # TEXT LENGTH                              #
  
        IND = NBTINDX[I]*NBTFETNO + OSTFET; 
        NXBLINK(BUFAD,IND) ;
        END 
      ELSE
        BEGIN                # DISCARD MESSAGE                         #
        CONTROL IFEQ DEBUG,1; 
        ERRORF = 1; 
        CONTROL FI; 
        END 
  
  
      RETURN; 
  
      END 
  
TERM