*DECK     CSSTCM
USETEXT TEXTSS; 
USETEXT TEXTCS; 
USETEXT TXTSMCS;
USETEXT TXCMDCS;
USETEXT TXTAPSS;
USETEXT TXTSUSS;
PROC CSSTCM;
# TITLE CSSTCM - TERMINATE A COMMAND #
 
      BEGIN 
 
# 
**    CSSTCM - TERMINATE A COMMAND. 
* 
*     C. BRION          82/05/06. 
* 
*     THIS PROCEDURE PROCESSES THE BREAK AS A COMMAND TO TERMINATE THE
*     CURRENT COMMAND.
* 
*     PROC CSSTCM 
* 
*     ENTRY:  
* 
*       HDRCMD = THE COMMAND HEADER WORD. 
*       ABH = THE ROUTED COMMAND HEADER WORD THAT CONTAINS THE ORDINAL
*             OF THE OPERATOR THAT ENTERED THE BREAK. 
* 
*     EXIT: 
* 
*       THE OCB AND AFFECTED NPUCBS WILL BE CLEARED AND AN EVENT MAY BE 
*       BE SENT TO THE EVENT QUEUE OR A NULL TERMINAL TEXT ENTRY MAY BE 
*       SENT TO THE CONNECTION TRAFFIC QUEUE. 
* 
# 
 
# 
****  PROC CSSTCM XREF LIST 
# 
 
      XREF
        BEGIN 
        PROC SSBCBW;                     # SS-CLEAR BIT IN WORD # 
        PROC SSTAQE;                     # SS-ACCEPT QUEUE ENTRY #
        END 
 
# 
****
# 
 
      ITEM OORD         U;               # OCB ORDINAL VAR #
      ITEM I; 
      ITEM DVAR;
 
 
# 
*     FLG$WORD - THIS BASED ARRAY IS USED TO POINT TO THE PENDING 
*     COMMAND REQUEST WORDS IN THE NPUCB-S. 
# 
      BASED ARRAY FLG$WORD [00:00] S(NPCBSZ$);
        BEGIN 
        ITEM FW$WORD    I(00,00,60);
        END 
 
 
 
      WCB$WORD[1] = 0;
      ABHWORD[1] = 0; 
      OORD = HDR$OPORD[0];
      ABHADR[1] = OORD;                  # SET OCB ORDINAL #
      WCB$WC[1] = 2;
      WCB$IAF[1] = TRUE;
 
# 
*     IF THE CURRENT COMMAND IN PROGRESS IS A STATUS COMMAND, CLEAR 
*     THE NPUCB(S) AFFECTED, CLEAR THE OCB AND SEND A STATUS DONE 
*     EVENT TO THE EVENT QUEUE. 
*     THE NPUCB IS SET SO THAT AFTER THE STATUS IS FINISHED, THE
*     PROC CSSCSR (COMPLETE STATUS REQUEST) WILL SEE A OCB OUT
*     OF RANGE AND THEN KNOW THAT THE OPERATOR TERMINATED THE COM-
*     MAND. 
# 
 
      IF OC$VERB[OORD] EQ "ST0" 
      THEN
        BEGIN 
        P<FLG$WORD> = LOC(NPU$STFLGS[0]); 
 
        FOR I=0 STEP 1 WHILE I LS CSNPCNT 
        DO
          BEGIN 
          SSBCBW(FLG$WORD[I],OORD); 
          END 
 
        IF OC$CNPU[OORD] NQ 0 
        THEN
          BEGIN 
          NPU$OPST[OC$CNPU[OORD]] = MAXACN$ + 1;
          END 
 
        OC$NCNT[OORD] = 0;               #CLEAR AFFECTED NPU COUNT #
        OC$UVERB[OORD] = 0; 
        WCB$SMID[1] = SMID"STUFIN"; 
        SSTAQE(P<EVQ>,WCBUF[1],ABH[1],CSSM[1]); 
        END 
 
# 
*     IF THE CURRENT COMMAND IS A SEND COMMAND, LOCATE ALL NPUCBS 
*     THAT MAY BE INVOLVED AND MARK THE SEND OPERATOR ORDINAL OUT 
*     OF RANGE SO AS TO CAUSE THE NPU RESPONSE TO BE DISCARDED BY 
*     THE CSSCHB ROUTINE WHEN IT ARRIVES. ISSUE A NULL TERMINAL TEXT
*     IN ORDER TO CAUSE THE READY.. MESSAGE TO BE ISSUED. CLEAR THE 
*     SEND NPU COUNT OF THE OCB.
# 
 
      IF (OC$VERB[OORD] EQ "SE0" OR 
         OC$VERB[OORD] EQ "SE1")
      THEN
        BEGIN 
        P<FLG$WORD> = LOC(NPU$SDFLGS[0]); 
        FOR I = 0 STEP 1 UNTIL (CSNPCNT - 1)
        DO
          BEGIN 
          SSBCBW(FLG$WORD[I],OORD); 
          IF NPU$OPSD[I] EQ OORD
          THEN
            BEGIN 
            NPU$OPSD[I] = MAXACN$ + 1;
            END 
          END 
        OC$NCNT[OORD] = 0;
        OC$CNPU[OORD] = 0;
        OC$UVERB[OORD] = 0; 
        SSTAQE(P<CNQ>,WCBUF[1],ABH[1],CSSM[1]); 
        END 
 
 
# 
*     IF THE CURRENT CMD IS A TEST,REQUEST, THEN CLEAR THE NPUCB AND THE
*     OCB OF THE REQUEST IN A MANNER THAT WILL ACCOUNT FOR THE RESPONSE 
*     BACK FROM THE NPU.
# 
 
      IF OC$VERB[OORD] EQ "TS0" 
      THEN
        BEGIN 
        P<FLG$WORD> = LOC(NPU$OVFLGS[OC$CNPU[OORD]]); 
        SSBCBW(FLG$WORD,OORD);
 
        OC$CNPU[OORD] = 0;
        OC$UVERB[OORD] = 0; 
        END 
 
 
      DVAR = 1; 
      END # CSSTCM #
 TERM