Seq # *Modification Id* Act
----------------------------+
00001 M00S00001.config +++| IDENT CONFIG,FWA
00002 M00S00002.config +++| ABS
00003 M00S00003.config +++| SST
00004 M00S00004.config +++| ENTRY CONFIG
00005 M00S00005.config +++| ENTRY RFL=
00006 M00S00006.config +++| ENTRY SSJ=
00007 M00S00007.config +++| SYSCOM B1
00008 M00S00008.config +++| CONFIG TITLE CONFIG - CONFIGURE MASS STORAGE.
00009 M00S00009.config +++|*COMMENT CONFIG - CONFIGURE MASS STORAGE.
| Line S00010 Modification History |
M01 (Removed by) | 281l803 |
Seq # *Modification Id* Act
----------------------------+
00010 M01S00010.281l803 ---| COMMENT COPYRIGHT CONTROL DATA CORPORATION. 1982.
| Line S00001 Modification History |
M01 (Added by) | 281l803 |
Seq # *Modification Id* Act
----------------------------+
00011 M01S00001.281l803 +++| COMMENT COPYRIGHT CONTROL DATA SYSTEMS INC. 1992.
00012 M00S00011.config +++| CONFIG SPACE 4,10
00013 M00S00012.config +++|***** CONFIG - CONFIGURE MASS STORAGE.
00014 M00S00013.config +++|*
00015 M00S00014.config +++|* A. J. BEEKMAN. 77/04/25.
00016 M00S00015.config +++|* W. E. GOEBEL 80/02/29.
00017 M00S00016.config +++|*
00018 M00S00017.config +++|* *CONFIG* PROVIDES THE CAPABILITY TO REPAIR OR RECONFIGURE
00019 M00S00018.config +++|* 844 OR 885 DEVICES ON-LINE.
00020 M00S00019.config +++| SPACE 4,10
00021 M00S00020.config +++|*** *CONFIG* ACCEPTS OPERATOR INPUT THROUGH A K-DISPLAY, VERIFIES
00022 M00S00021.config +++|* THE ENTERED PARAMETERS AND THEN USES THESE PARAMETERS WHILE
00023 M00S00022.config +++|* CALLING THE PP PROGRAM *1RM* TO RECONFIGURE OR SUSPEND
00024 M00S00023.config +++|* 844 OR 885 TYPE RMS DEVICES.
00025 M00S00024.config +++| SPACE 4,10
| Line S00025 Modification History |
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00026 M01S00025.v23l617 ---|*** CONTROL STATEMENT CALL.
| Line S00001 Modification History |
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00027 M01S00001.v23l617 +++|*** COMMAND.
00028 M00S00026.config +++|*
00029 M00S00027.config +++|* CONFIG. *CONFIG* IS INITIATED BY *CMS* WHEN AN IDLED
00030 M00S00028.config +++|* DEVICE IS FOUND.
00031 M00S00029.config +++| SPACE 4,10
00032 M00S00030.config +++|*** K-DISPLAY INPUT DATA.
00033 M00S00031.config +++|*
00034 M00S00032.config +++|* DATA ITEMS ARE PARTITIONED WITH SEPARATOR CHARACTERS, I.E.,
00035 M00S00033.config +++|* ANY NON-ALPHANUMERIC CHARACTER EXCEPT *=*. EACH VALUE
00036 M00S00034.config +++|* MUST BE PRECEDED BY A PARAMETER AND SEPARATED FROM THE
00037 M00S00035.config +++|* PARAMETER BY AN *=*. ONLY ONE DATA ITEM (PARAMETER=
00038 M00S00036.config +++|* VALUE OR COMMAND) MAY BE ENTERED ON A LINE OF INPUT AND NO
00039 M00S00037.config +++|* LINE TERMINATOR IS NECESSARY.
00040 M00S00038.config +++|*
00041 M00S00039.config +++|* THE FOLLOWING IS A DESCRIPTION OF PARAMETERS.
00042 M00S00040.config +++|*
| Line S00041 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00043 M01S00041.ns22000 ---|* EQ=EE EQUIPMENT *EE* IS TO BE PROCESSED.
| Line S00001 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00044 M01S00001.ns22000 +++|* EQ=EEE EST ORDINAL *EEE* IS TO BE PROCESSED.
00045 M00S00042.config +++|* THIS PARAMETER IS ENTERED WHEN THE PROCESSING
00046 M00S00043.config +++|* OF EQUIPMENTS IS ORDER-DEPENDENT. THIS IS
00047 M00S00044.config +++|* NEEDED, FOR EXAMPLE, WHEN A UNIT MUST FIRST BE
00048 M00S00045.config +++|* FREED UP TO REPLACE A FAILING UNIT. IN THIS
00049 M00S00046.config +++|* CASE A UNIT IS DELETED FROM AN EQUIPMENT WHERE
00050 M00S00047.config +++|* IT IS NOT IN USE SO THAT IT CAN REPLACE A UNIT
00051 M00S00048.config +++|* WHICH IS FAILING.
00052 M00S00049.config +++|*
00053 M00S00050.config +++|* CH=C1,C2 CHANNEL(S) TO BE USED UNDER NEW DEVICE
00054 M00S00051.config +++|* DEFINITION. THIS PARAMETER IS USED WHEN THE
00055 M00S00052.config +++|* ENTIRE DEVICE IS TO BE REDEFINED TO AN ALTERNATE
00056 M00S00053.config +++|* CHANNEL STRING. IT CAN ALSO BE USED TO ADD OR
00057 M00S00054.config +++|* DELETE CHANNELS FROM AN EQUIPMENT DEFINITION.
00058 M00S00055.config +++|*
00059 M00S00056.config +++|* UL=U1,U2,... UN UNIT LIST FOR NEW CONFIGURATION. WHEN
00060 M00S00057.config +++|* A UNIT IS TO BE REPLACED, ADDED OR DELETED
00061 M00S00058.config +++|* THE ENTIRE UNIT CONFIGURATION MUST BE ENTERED
00062 M00S00059.config +++|* WITH THIS PARAMETER. IF A UNIT IS TO BE
00063 M00S00060.config +++|* ADDED OR DELETED THE EQUIPMENT MUST BE GLOBALLY
00064 M00S00061.config +++|* UNLOADED IF SHARED OR HAVE UNAVAILABLE STATUS
00065 M00S00062.config +++|* OTHERWISE.
00066 M00S00063.config +++|*
00067 M00S00064.config +++|* UR=UU UNIT *UU* IS TO BE RECABLED. THIS OPTION IS USED
00068 M00S00065.config +++|* WHEN A UNIT IS TO BE REPLACED BY A NEW UNIT WITH
00069 M00S00066.config +++|* THE SAME UNIT NUMBER. THIS IS DONE BY PHYSICALLY
00070 M00S00067.config +++|* DISCONNECTING THE OLD UNIT AND RECABLING IN THE
00071 M00S00068.config +++|* REPLACEMENT UNIT. MULTIPLE UNITS MAY BE
00072 M00S00069.config +++|* SPECIFIED FOR RECABLING.
00073 M00S00070.config +++| SPACE 4,10
00074 M00S00071.config +++|*** K-DISPLAY COMMANDS.
00075 M00S00072.config +++|*
00076 M00S00073.config +++|* GO. INITIATE PROCESSING OF RECONFIGURATION RUN USING
00077 M00S00074.config +++|* PARAMETERS ENTERED. THE K-DISPLAY PARAMETERS WILL BE
00078 M00S00075.config +++|* SET TO THE DEFAULT VALUES WHEN CONTROL IS RETURNED.
00079 M00S00076.config +++|*
00080 M00S00077.config +++|* SUSPEND. ALL REQUESTS TO CURRENT EQUIPMENT ARE SUSPENDED.
00081 M00S00078.config +++|* THIS IS DONE SO THAT THE DRIVE MAY BE REPAIRED
00082 M00S00079.config +++|* ON LINE. MULTIPLE EQUIPMENTS MAY BE SUSPENDED
00083 M00S00080.config +++|* CONCURRENTLY.
00084 M00S00081.config +++|*
00085 M00S00082.config +++|* CLEAR. CLEARS THE SUSPEND AND IDLE STATUS FOR CURRENT
00086 M00S00083.config +++|* EQUIPMENT. THIS IS ENTERED WHEN THE EQUIPMENT IS
00087 M00S00084.config +++|* TO BE RETURNED FOR NORMAL SYSTEM USE.
00088 M00S00085.config +++|*
00089 M00S00086.config +++|* END. ENDS *CONFIG* PROCESSING.
00090 M00S00087.config +++|*
00091 M00S00088.config +++|* RERUN. SET THE PARAMETERS TO THEIR DEFAULT VALUES AND UPDATE
00092 M00S00089.config +++|* THE LIST OF EQUIPMENTS TO BE RECONFIGURED.
00093 M00S00090.config +++|*
00094 M00S00091.config +++|* RESET. RESET THE PARAMETERS TO THEIR DEFAULT VALUES.
00095 M00S00092.config +++|*
00096 M00S00093.config +++|*
00097 M00S00094.config +++|* THE FOLLOWING COMMANDS ARE ENTERED IN RESPONSE TO AN
00098 M00S00095.config +++|* ERROR CONDITION DETECTED BY *1RM*.
00099 M00S00096.config +++|*
00100 M00S00097.config +++|* ABORT. THIS COMMAND IS ENTERED TO DISCONTINUE PROCESSING
00101 M00S00098.config +++|* OF THE CURRENT COMMAND IN PROGRESS.
00102 M00S00099.config +++|*
00103 M00S00100.config +++|* IGNORE. THE ERROR CONDITION DETECTED BY *1RM* IS TO
00104 M00S00101.config +++|* BE IGNORED. THIS COMMAND SHOULD BE USED WITH
00105 M00S00102.config +++|* DISCRETION. IT SHOULD BE USED ONLY WHEN THE
00106 M00S00103.config +++|* ERROR BEING POSTED IS WELL UNDERSTOOD AND
00107 M00S00104.config +++|* CAN LEGITIMATELY BE IGNORED.
00108 M00S00105.config +++|*
00109 M00S00106.config +++|* NEXT. THIS COMMAND IS ENTERED IN RESPONSE TO AN
00110 M00S00107.config +++|* 885 SERVO TIMING CHECK WHEN THE TIMING DATA
00111 M00S00108.config +++|* IS IN THE REQUIRED RANGE. ENTRY OF THIS
00112 M00S00109.config +++|* COMMAND WILL CAUSE PROCESSING TO CONTINUE
00113 M00S00110.config +++|* WITH EITHER THE NEXT UNIT OR THE NEXT STEP
00114 M00S00111.config +++|* OF PROCESSING.
00115 M00S00112.config +++|*
00116 M00S00113.config +++|* RECHECK. THIS COMMAND IS ENTERED TO RETRY A PROCESS
00117 M00S00114.config +++|* WHICH PREVIOUSLY GAVE AN ERROR. IF THE ERROR
00118 M00S00115.config +++|* PERSISTS THE MESSAGE WILL BE POSTED AGAIN
00119 M00S00116.config +++|* WITH ANOTHER OPPORTUNITY FOR OPERATOR ACTION.
00120 M00S00117.config +++| SPACE 4,10
00121 M00S00118.config +++|*** OPERATIONAL CONSIDERATIONS.
00122 M00S00119.config +++|*
00123 M00S00120.config +++|* WHEN REPLACING A FAILING UNIT WITH A NEW UNIT THE
00124 M00S00121.config +++|* NEW UNIT MUST NOT BE DEFINED IN THE EST. IF THE
00125 M00S00122.config +++|* REPLACEMENT UNIT IS DEFINED IN THE EST IT MUST
00126 M00S00123.config +++|* FIRST BE DELETED FROM THE EQUIPMENT IN WHICH IT IS
00127 M00S00124.config +++|* DEFINED.
00128 M00S00125.config +++|* WHEN ADDING OR DELETING A UNIT FROM AN EQUIPMENT
00129 M00S00126.config +++|* THE EQUIPMENT MUST BE UNLOADED.
00130 M00S00127.config +++|*
00131 M00S00128.config +++|*
00132 M00S00129.config +++|* WHEN RUNNING IN A MMF ENVIRONMENT CERTAIN PROBLEMS ARISE.
00133 M00S00130.config +++|* THEY ARE AS FOLLOWS -
00134 M00S00131.config +++|*
00135 M00S00132.config +++|* 1) WHEN A UNIT IS INTRODUCED INTO AN EQUIPMENT
00136 M00S00133.config +++|* *CONFIG* WILL CHECK IF THE REPLACEMENT UNIT IS NOT IN
00137 M00S00134.config +++|* USE IN THE MACHINE INITIATING THE RECONFIGURATION, BUT IT
00138 M00S00135.config +++|* CANNOT CHECK IF IT IS IN USE BY THE OTHER MACHINES. THE
00139 M00S00136.config +++|* DESIGN OF THIS PROGRAM DOES NOT SOLVE THIS PROBLEM AND IT
00140 M00S00137.config +++|* IS LEFT TO THE OPERATORS TO ENSURE THAT THE REPLACEMENT
00141 M00S00138.config +++|* UNIT IS TRULY FREE IN THE MMF COMPLEX.
00142 M00S00139.config +++|*
00143 M00S00140.config +++|* 2) WHEN REPLACING A UNIT WITH A NEW UNIT, *CONFIG*
00144 M00S00141.config +++|* WILL CHECK FOR ALL MACHINES ACCESSING THE DEVICE TO COMPLY
00145 M00S00142.config +++|* WITH THE RECONFIGURATION. HOWEVER, IF THE MACHINE DOES NOT
00146 M00S00143.config +++|* HAVE THE DEVICE LOADED THERE IS NO WAY TO CHECK FOR ITS
00147 M00S00144.config +++|* COMPLIANCE. IN THIS CASE THE RECONFIGURATION WILL PROCEED
00148 M00S00145.config +++|* ON THE MACHINES WITH THE DEVICE LOADED AND THE OTHER
00149 M00S00146.config +++|* MACHINES WILL NOT BE ABLE TO USE THIS DEVICE.
00150 M00S00147.config +++|*
00151 M00S00148.config +++|* 3) THE ADDITION AND DELETION OF A UNIT IS INTENDED
00152 M00S00149.config +++|* FOR LOCAL MACHINE USE. WHEN AN ADD OR DELETE IS COMPLETED
00153 M00S00150.config +++|* ON ONE MACHINE, THE REDEFINITION REQUESTED BIT WILL BE
00154 M00S00151.config +++|* CLEARED FOR THAT EQUIPMENT. THUS, NO OTHER MACHINE WILL
00155 M00S00152.config +++|* RECOGNIZE THE REQUEST FOR RECONFIGURATION ON THIS EQUIPMENT.
00156 M00S00153.config +++|* IF MORE THAN ONE MACHINE IN THE COMPLEX WISHES TO ADD OR
| Line S00154 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00157 M01S00154.ns22000 ---|* DELETE UNITS FROM THE SAME SHARED EQUIPMENT, *IDLE,EQNN.*
| Line S00002 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00158 M01S00002.ns22000 +++|* DELETE UNITS FROM THE SAME SHARED EQUIPMENT, *IDLE,EQXXX.*
00159 M00S00155.config +++|* WILL HAVE TO BE ENTERED FROM EACH MACHINE.
00160 M00S00156.config +++| SPACE 4,10
00161 M00S00157.config +++|*** ROUTINES CALLED.
00162 M00S00158.config +++|*
00163 M00S00159.config +++|* *1RM*, *CMS*.
00164 M00S00160.config +++| SPACE 4,10
00165 M00S00161.config +++|*** DAYFILE MESSAGES.
00166 M00S00162.config +++|*
00167 M00S00163.config +++|*
| Line S00164 Modification History |
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00168 M01S00164.v23l617 ---|* * INVALID CONTROL STATEMENT.* = ARGUMENTS WERE ENTERED
00169 M01S00165.v23l617 ---|* ON THE CONTROL STATEMENT CALL TO *CONFIG*.
| Line S00002 Modification History |
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00170 M01S00002.v23l617 +++|* * INCORRECT COMMAND.* = INCORRECT ARGUMENTS WERE ENTERED
00171 M01S00003.v23l617 +++|* ON THE *CONFIG* COMMAND.
00172 M00S00166.config +++|*
| Line S00167 Modification History |
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00173 M01S00167.v23l617 ---|* * INVALID USER ACCESS.* = *CONFIG* WAS CALLED FROM A NON-
| Line S00004 Modification History |
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00174 M01S00004.v23l617 +++|* * USER ACCESS NOT VALID.* = *CONFIG* WAS CALLED FROM A NON-
00175 M00S00168.config +++|* SYSTEM ORIGIN JOB OR WITHOUT MASS STORAGE SUBSYSTEM ID.
00176 M00S00169.config +++|*
00177 M00S00170.config +++|* * CONFIG UTILITY COMPLETE.* = ALL IDLED EQUIPMENTS HAVE
00178 M00S00171.config +++|* BEEN PROCESSED.
| Line S00172 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00179 M01S00172.ns22000 ---| SPACE 4,10
00180 M01S00173.ns22000 ---|*** ERROR LOG MESSAGES.
00181 M01S00174.ns22000 ---|*
00182 M01S00175.ns22000 ---|* *EQXX REDEFINITION COMPLETE.* = THE REDEFINITION RUN FOR
00183 M01S00176.ns22000 ---|* EQUIPMENT XX HAS COMPLETED SUCCESSFULLY.
00184 M00S00177.config +++| SPACE 4,10
00185 M00S00178.config +++|*** OPERATOR MESSAGES.
00186 M00S00179.config +++|*
00187 M00S00180.config +++|* IF ONE OF THE ERRORS BELOW IS ENCOUNTERED, THE OPERATOR WILL
00188 M00S00181.config +++|* BE ABLE TO CORRECT THE ERROR VIA THE K-DISPLAY. ALL
00189 M00S00182.config +++|* PARAMETERS OR COMMANDS AFTER THE ONE IN ERROR WILL BE
00190 M00S00183.config +++|* IGNORED.
00191 M00S00184.config +++|*
00192 M00S00185.config +++|*
00193 M00S00186.config +++|* **** DEVICE NOT FIRST IN CHAIN.
00194 M00S00187.config +++|* AN EQUIPMENT OTHER THAN THE FIRST EQUIPMENT IN A
00195 M00S00188.config +++|* LINKED DEVICE WAS ENTERED TO BE RECONFIGURED. THIS
00196 M00S00189.config +++|* IS NOT ALLOWED IN ORDER TO PREVENT DESTROYING THE
00197 M00S00190.config +++|* INTEGRITY OF A LINKED DEVICE RECONFIGURATION.
00198 M00S00191.config +++|*
00199 M00S00192.config +++|* **** EQUIPMENT STATUS INCORRECT.
00200 M00S00193.config +++|* THE EQUIPMENT BEING REDEFINED IS NOT UNLOADED AND
00201 M00S00194.config +++|* AS SUCH THE NUMBER OF UNITS CANNOT BE CHANGED.
00202 M00S00195.config +++|*
00203 M00S00196.config +++|* **** ERROR IN CHANNEL NUMBER.
00204 M00S00197.config +++|* MAY INDICATE -
00205 M00S00198.config +++|* 1) IF .LE. 10 PP-S, NOT WITHIN RANGE OF 0-13B.
00206 M00S00199.config +++|* 2) IF .GT. 10 PP-S, NOT WITHIN RANGES OF 0 - 13B
00207 M00S00200.config +++|* OR 20B-33B.
00208 M00S00201.config +++|* 3) 1 (OR MORE) OF CHANNELS SPECIFIED IS DOWN.
00209 M00S00202.config +++|*
| Line S00203 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00210 M01S00203.ns22000 ---|* **** ERROR IN EQUIPMENT NUMBER.
| Line S00003 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00211 M01S00003.ns22000 +++|* **** ERROR IN EST ORDINAL.
00212 M00S00204.config +++|* MAY INDICATE -
00213 M00S00205.config +++|* 1) EQUIPMENT NOT MASS STORAGE.
00214 M00S00206.config +++|* 2) EQUIPMENT IS NOT *844* OR *885*.
00215 M00S00207.config +++|*
00216 M00S00208.config +++|* **** ERROR IN UNIT LIST.
00217 M00S00209.config +++|* MAY INDICATE -
00218 M00S00210.config +++|* 1) A UNIT NUMBER WAS DUPLICATED IN THE UNIT LIST.
00219 M00S00211.config +++|* 2) MORE THAN 3 UNITS WERE SPECIFIED FOR AN *885*.
00220 M00S00212.config +++|*
| Line S00213 Modification History |
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00221 M01S00213.v23l617 ---|* **** ILLEGAL ENTRY.
| Line S00005 Modification History |
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00222 M01S00005.v23l617 +++|* **** INCORRECT ENTRY.
00223 M00S00214.config +++|* 1) A KEYWORD WAS NOT FOUND.
00224 M00S00215.config +++|* 2) TOO MANY DIGITS WERE ENTERED AS A PARAMETER.
00225 M00S00216.config +++|* 3) A NON-DIGIT CHARACTER WAS FOUND IN A
00226 M00S00217.config +++|* PARAMETER.
00227 M00S00218.config +++|* 4) A CHARACTER WAS FOUND AFTER THE POST RADIX.
00228 M00S00219.config +++|* 5) AN 8 OR 9 WAS FOUND WITH A *B* POST RADIX.
00229 M00S00220.config +++|*
| Line S00221 Modification History |
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00230 M01S00221.v23l617 ---|* **** ILLEGAL SEPARATOR.
| Line S00006 Modification History |
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00231 M01S00006.v23l617 +++|* **** INCORRECT SEPARATOR.
00232 M00S00222.config +++|* A *=* SEPARATOR WAS FOUND FOLLOWING A PARAMETER
00233 M00S00223.config +++|* VALUE OR COMMAND IN THE INPUT STRING.
00234 M00S00224.config +++|*
00235 M00S00225.config +++|* **** INTRODUCED UNIT IN USE.
00236 M00S00226.config +++|* MAY INDICATE -
00237 M00S00227.config +++|* A UNIT BEING INTRODUCED INTO AN EQUIPMENT IS
00238 M00S00228.config +++|* DEFINED ON ANOTHER EQUIPMENT.
00239 M00S00229.config +++|*
00240 M00S00230.config +++|*
00241 M00S00231.config +++|* THE FOLLOWING COMMANDS ARE POSTED ON THE K-DISPLAY BY
00242 M00S00232.config +++|* *1RM*. WHEN *1RM* DETECTS A CONDITION WHICH MAY BE
00243 M00S00233.config +++|* RESPONDED TO BY THE OPERATOR, A MESSAGE IS POSTED AND
00244 M00S00234.config +++|* THE LEGAL COMMANDS ARE POSTED ON THE K-DISPLAY. THE
00245 M00S00235.config +++|* FOLLOWING LIST OF ERROR MESSAGES LISTS THOSE LEGAL
00246 M00S00236.config +++|* COMMANDS AND INDICATES IF AN OPERATOR RESPONSE IS
00247 M00S00237.config +++|* REQUIRED OR OPTIONAL.
00248 M00S00238.config +++|*
00249 M00S00239.config +++|*
00250 M00S00240.config +++|* UNIT XX, CHYY WRITE/READ VERIFY ERROR.
00251 M00S00241.config +++|* PART OF THE VALIDATION PROCEDURE WHEN RETURNING
00252 M00S00242.config +++|* AN EQUIPMENT FOR SYSTEM USE (CLEAR COMMAND) IS
00253 M00S00243.config +++|* TO WRITE A SECTOR OF DATA TO THE DEVICE, READ IT
00254 M00S00244.config +++|* BACK AND VERIFY THE DATA. WHEN THIS VERIFICATION
00255 M00S00245.config +++|* FAILS THE ABOVE MESSAGE APPEARS.
00256 M00S00246.config +++|* COMMANDS - REQUIRED.
00257 M00S00247.config +++|* ABORT, IGNORE, RECHECK.
00258 M00S00248.config +++|*
00259 M00S00249.config +++|*
00260 M00S00250.config +++|* ERROR IN PERFORMING SERVO CHECK ON UNIT XX.
00261 M00S00251.config +++|* THE SERVO ADJUSTMENT PROCEDURE HAS ENCOUNTERED
00262 M00S00252.config +++|* A DISK ERROR CONDITION.
00263 M00S00253.config +++|* COMMANDS - REQUIRED.
00264 M00S00254.config +++|* ABORT, IGNORE, RECHECK.
00265 M00S00255.config +++|*
00266 M00S00256.config +++|*
00267 M00S00257.config +++|* UNIT XX SERVO TIMING= XXX. ACCEPTABLE RANGE IS 325 TO 345.
00268 M00S00258.config +++|* WHEN RECONFIGURING AN 885 HDA A SERVO ADJUSTMENT
00269 M00S00259.config +++|* PROCEDURE IS EXECUTED. THIS PROCEDURE MEASURES
00270 M00S00260.config +++|* SERVO TIMING CHARACTERISTICS WHICH MUST BE IN THE
00271 M00S00261.config +++|* SPECIFIED RANGE. A DRIVE ADJUSTMENT MUST BE MADE
00272 M00S00262.config +++|* BY A CE UNTIL THE TIMING IS IN THE SPECIFIED
00273 M00S00263.config +++|* RANGE.
00274 M00S00264.config +++|* COMMANDS - REQUIRED.
00275 M00S00265.config +++|* ABORT, RECHECK.
00276 M00S00266.config +++|* NEXT. ONLY IF TIMING IS IN RANGE.
00277 M00S00267.config +++|* IGNORE. ONLY IF TIMING IS NOT IN RANGE.
00278 M00S00268.config +++|*
00279 M00S00269.config +++|*
00280 M00S00270.config +++|* ERROR ON LINK DEVICE.
00281 M00S00271.config +++|* WHEN A DEVICE IS SHARED BETWEEN MAINFRAMES THE
00282 M00S00272.config +++|* LINK DEVICE IS READ TO SYNCHRONIZE PROCESSING
00283 M00S00273.config +++|* BETWEEN MACHINES. WHEN AN ERROR OCCURS IN
00284 M00S00274.config +++|* READING THE LINK DEVICE THIS ERROR MESSAGE
00285 M00S00275.config +++|* IS ISSUED.
00286 M00S00276.config +++|* COMMANDS - REQUIRED.
00287 M00S00277.config +++|* ABORT, IGNORE.
00288 M00S00278.config +++|*
00289 M00S00279.config +++|*
00290 M00S00280.config +++|* SPIN DOWN UNIT XX.
00291 M00S00281.config +++|* THIS IS A DIRECTIVE TO THE OPERATOR OR CE TO
00292 M00S00282.config +++|* SPIN DOWN THE SPECIFIED UNIT IN PREPARATION
00293 M00S00283.config +++|* FOR MOVING THE PACK OR HDA.
00294 M00S00284.config +++|* COMMAND - OPTIONAL.
00295 M00S00285.config +++|* ABORT, IGNORE.
00296 M00S00286.config +++|*
00297 M00S00287.config +++|*
00298 M00S00288.config +++|* MOVE PACK FROM UNIT XX TO UNIT YY AND SPIN UP.
00299 M00S00289.config +++|* THIS DIRECTIVE IS ISSUED TO THE OPERATOR FOR
00300 M00S00290.config +++|* EACH UNIT TO BE MOVED DURING A RECONFIGURATION.
00301 M00S00291.config +++|* UNIT XX HAS PREVIOUSLY BEEN DIRECTED TO BE
00302 M00S00292.config +++|* SPUN DOWN AND ITS PACK OR HDA IS NOW TO BE
00303 M00S00293.config +++|* MOVED TO UNIT YY.
00304 M00S00294.config +++|* COMMANDS - OPTIONAL.
00305 M00S00295.config +++|* ABORT, IGNORE.
00306 M00S00296.config +++|*
00307 M00S00297.config +++|*
00308 M00S00298.config +++|* UNIT XX, CHYY LABEL READ ERROR.
00309 M00S00299.config +++|* IN VERIFYING THAT THE CORRECT LABEL IS PRESENT
00310 M00S00300.config +++|* ON UNIT XX A DISK ERROR OCCURRED WHICH PREVENTED
00311 M00S00301.config +++|* THE LABEL FROM BEING READ SUCCESSFULLY.
00312 M00S00302.config +++|* THE CHANNEL IS SPECIFIED IN THE MESSAGE AND
00313 M00S00303.config +++|* MAY BE HELPFUL IF THE VERIFY ERROR OCCURS
00314 M00S00304.config +++|* ONLY FROM A SINGLE CHANNEL IN A DUAL ACCESS
00315 M00S00305.config +++|* CONFIGURATION.
00316 M00S00306.config +++|* COMMANDS - REQUIRED.
00317 M00S00307.config +++|* ABORT, IGNORE, RECHECK.
00318 M00S00308.config +++|*
00319 M00S00309.config +++|*
00320 M00S00310.config +++|* UNIT XX, CHYY LABEL VERIFICATION ERROR.
00321 M00S00311.config +++|* THE LABEL SECTOR WAS READ BUT THE DATA IN THE
00322 M00S00312.config +++|* LABEL SECTOR IS NOT CORRECT.
00323 M00S00313.config +++|* COMMANDS - REQUIRED.
00324 M00S00314.config +++|* ABORT, IGNORE, RECHECK.
00325 M00S00315.config +++|*
00326 M00S00316.config +++|*
00327 M00S00317.config +++|* WAITING FOR MACHINE ID=XX.
00328 M00S00318.config +++|* A SHARED DEVICE IS BEING PROCESSED AND IT HAS
00329 M00S00319.config +++|* BEEN DETECTED THAT MACHINE IDXX IS NOT AT THE
00330 M00S00320.config +++|* SAME STAGE OF PROCESSING AS THIS MACHINE.
00331 M00S00321.config +++|* COMMANDS - REQUIRED.
00332 M00S00322.config +++|* ABORT, IGNORE.
00333 M00S00323.config +++| SPACE 4,10
00334 M00S00324.config +++|**** ASSEMBLY CONSTANTS.
00335 M00S00325.config +++|
00336 M00S00326.config +++|
00337 M00S00327.config +++| OBUFL EQU 1001B OUTPUT BUFFER LENGTH
| Line S00328 Modification History |
M01 (Removed by) | confi3 |
Seq # *Modification Id* Act
----------------------------+
00338 M01S00328.confi3 ---| KMLL EQU 44 LINES IN K-DISPLAY BEFORE MESSAGE BUFFER
| Line S00001 Modification History |
M01 (Added by) | confi3 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00339 M02S00001.241l630 ---| KMLL EQU 43 LINES IN K-DISPLAY BEFORE MESSAGE BUFFER
00340 M00S00329.config +++| KCML EQU 12 COMMAND LINES IN K-DISPLAY
| Line S00330 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00341 M01S00330.241l630 ---| KEQL EQU 4 EQUIPMENT DISPLAY LINES IN K-DISPLAY
00342 M01S00331.241l630 ---| KLNL EQU 8 K-DISPLAY LINE LENGTH INCLUDING HEADER
| Line S00001 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00343 M01S00001.241l630 +++| KEQL EQU 7 MAX NUMBER OF IDLED EQUIPMENTS DISPLAYED
00344 M01S00002.241l630 +++| KLNL EQU 7 K-DISPLAY LINE LENGTH INCLUDING HEADER
00345 M00S00332.config +++| NSCI EQU 80 NUMBER OF CHARACTERS TO SCAN ON INPUT
00346 M00S00333.config +++|
00347 M00S00334.config +++|
00348 M00S00335.config +++|****
00349 M00S00336.config +++| SPACE 4,10
00350 M00S00337.config +++|*CALL COMCMAC
| Line S00007 Modification History |
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00351 M01S00007.v23l617 +++|*CALL COMCDCM
| Line S00003 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00352 M01S00003.241l630 +++|*CALL COMCDCP
00353 M00S00338.config +++|*CALL COMSSSD
00354 M00S00339.config +++|*CALL COMSSSJ
00355 M00S00340.config +++| LIST G,X
00356 M00S00341.config +++|*CALL COMS1RM
00357 M00S00342.config +++| LIST *
00358 M00S00343.config +++| MACROS TITLE MACROS.
00359 M00S00344.config +++| CALL1RM SPACE 4,10
00360 M00S00345.config +++|** CALL1RM - CALL *1RM* TO PERFORM SPECIFIED FUNCTION.
00361 M00S00346.config +++|*
00362 M00S00347.config +++|* CALL1RM F
00363 M00S00348.config +++|* F = FUNCTION CODE AS DEFINED IN *COMS1RM*.
00364 M00S00349.config +++|*
00365 M00S00350.config +++|* USES X - 6.
00366 M00S00351.config +++|*
00367 M00S00352.config +++|* CALLS CRM.
00368 M00S00353.config +++|
00369 M00S00354.config +++|
00370 M00S00355.config +++| CALL1RM MACRO F
00371 M00S00356.config +++| MACREF CALL1RM
00372 M00S00357.config +++| SX6 F*2+1
00373 M00S00358.config +++| RJ CRM
| Line S00359 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00374 M01S00359.241l630 ---| ENDM
00375 M01S00360.241l630 ---| D SPACE 4,10
00376 M01S00361.241l630 ---|** D - GENERATE DISPLAY LINE FOR *K-DISPLAY*.
00377 M01S00362.241l630 ---|*
00378 M01S00363.241l630 ---|* D C C = CHARACTER DATA TO BE DISPLAYED.
00379 M01S00364.241l630 ---|* DATA IS DISPLAYED LEFT-JUSTIFIED.
00380 M01S00365.241l630 ---|
00381 M01S00366.241l630 ---|
00382 M01S00367.241l630 ---| D MACRO C
00383 M01S00368.241l630 ---| IFC NE,+C++,2
00384 M01S00369.241l630 ---| VFD 12/7756B-10*K,36/6H ,12/6000B
| Line S00370 Modification History |
M01 (Removed by) | v23l617 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00385 M02S00370.241l630 ---| DATA H+C+
| Line S00008 Modification History |
M01 (Added by) | v23l617 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00386 M02S00008.241l630 ---| DATA L+C+
| Line S00371 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00387 M01S00371.241l630 ---| K SET K+1
00388 M01S00372.241l630 ---| ENDM
| Line S00004 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00389 M01S00004.241l630 +++| CALL1RM ENDM
00390 M00S00373.config +++| GETLCW SPACE 4,10
00391 M00S00374.config +++|** GETLCW - GET LOW CORE WORDS.
00392 M00S00375.config +++|*
00393 M00S00376.config +++|* GETLCW WC,LC,AD
00394 M00S00377.config +++|* WC = WORD COUNT OF LOW CORE WORDS TO READ.
00395 M00S00378.config +++|* LC = ADDRESS OF LOW CORE WORDS.
00396 M00S00379.config +++|* AD = ADDRESS TO STORE LOW CORE WORDS.
00397 M00S00380.config +++|*
00398 M00S00381.config +++|* USES X - 1, 2, 3.
00399 M00S00382.config +++|*
00400 M00S00383.config +++|* CALLS GLC.
00401 M00S00384.config +++|
00402 M00S00385.config +++|
00403 M00S00386.config +++| GETLCW MACRO WC,FR,AD
00404 M00S00387.config +++| MACREF GETLCW
00405 M00S00388.config +++| R= X1,WC
00406 M00S00389.config +++| R= X2,FR
00407 M00S00390.config +++| R= X3,AD
00408 M00S00391.config +++| RJ GLC
| Line S00392 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00409 M01S00392.241l630 ---| ENDM
| Line S00005 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00410 M01S00005.241l630 +++| GETLCW ENDM
00411 M00S00393.config +++| KEYWORD SPACE 4,10
00412 M00S00394.config +++|** KEYWORD - DEFINE COMMAND AND PARAMETER ENTRY POINTS.
00413 M00S00395.config +++|*
00414 M00S00396.config +++|* KEYWORD E
00415 M00S00397.config +++|* E = KEYBOARD KEYWORD SYNTAX.
00416 M00S00398.config +++|* AN *=* IS APPENDED TO THE KEYWORD OF AN EQUIVALENCED
00417 M00S00399.config +++|* PARAMETER. THIS MACRO DEFINES BOTH COMMAND AND
00418 M00S00400.config +++|* PARAMETER KEYWORDS.
00419 M00S00401.config +++|
00420 M00S00402.config +++|
00421 M00S00403.config +++| KEYWORD MACRO KEYWRD,PR
00422 M00S00404.config +++| MACREF KEYWORD
00423 M00S00405.config +++| KYMX SET KYMX+1
00424 M00S00406.config +++| IFC NE,*PR*0*,1
00425 M00S00407.config +++| PR SUBR
00426 M00S00408.config +++| KEY RMT
00427 M00S00409.config +++| A MICRO 1,,=KEYWRD=
00428 M00S00410.config +++| ORG TKEY+."A"
00429 M00S00411.config +++| VFD 42/0L_KEYWRD,18/PR
00430 M00S00412.config +++| KEY RMT
| Line S00413 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00431 M01S00413.241l630 ---| ENDM
| Line S00006 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00432 M01S00006.241l630 +++| KEYWORD ENDM
00433 M00S00414.config +++|
00434 M00S00415.config +++| KYMX SET 0 INITIALIZE KEYWORD COUNT
| Line S00007 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00435 M01S00007.241l630 +++| MOVEDL SPACE 4,15
00436 M01S00008.241l630 +++|** MOVEDL - MOVE DISPLAY LINE.
00437 M01S00009.241l630 +++|*
00438 M01S00010.241l630 +++|* *MOVEDL* IS USED TO MOVE A DISPLAY LINE TO A K-DISPLAY
00439 M01S00011.241l630 +++|* BUFFER WHICH HAS THE X,Y COORDINATES IN THE FIRST 24 BITS
00440 M01S00012.241l630 +++|* OF EACH LINE.
00441 M01S00013.241l630 +++|*
00442 M01S00014.241l630 +++|* MOVEDL COUNT,FROM,TO
00443 M01S00015.241l630 +++|*
00444 M01S00016.241l630 +++|* COUNT = WORD COUNT OF BLOCK TO BE MOVED.
00445 M01S00017.241l630 +++|* FROM = ADDRESS OF FIRST WORD OF SOURCE.
00446 M01S00018.241l630 +++|* TO = ADDRESS OF FIRST WORD OF DESTINATION.
00447 M01S00019.241l630 +++|*
00448 M01S00020.241l630 +++|* USES X - 1, 2, 3.
00449 M01S00021.241l630 +++|*
00450 M01S00022.241l630 +++|* CALLS MPL.
00451 M01S00023.241l630 +++|
00452 M01S00024.241l630 +++|
00453 M01S00025.241l630 +++| MOVEDL MACRO COUNT,FROM,TO
00454 M01S00026.241l630 +++| MACREF MOVEDL
00455 M01S00027.241l630 +++| R= X1,COUNT
00456 M01S00028.241l630 +++| R= X2,FROM
00457 M01S00029.241l630 +++| R= X3,TO
00458 M01S00030.241l630 +++| RJ MPL
00459 M01S00031.241l630 +++| MOVEDL ENDM
00460 M00S00416.config +++| TITLE KEYWORD DEFINITION FOR *CONFIG* COMMANDS.
| Line S00417 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00461 M01S00417.241l630 ---| CDEF CLEAR,(CLEARS IDLE AND SUSPEND ON CURRENT EQUIPMENT.)
00462 M01S00418.241l630 ---| CDEF END,(CLEAR ALL DEVICE IDLES, AND END *CONFIG*.)
00463 M01S00419.241l630 ---| CDEF GO,(INITIATES PROCESSING OF ENTERED CONFIGURATION.)
00464 M01S00420.241l630 ---| CDEF RERUN,(RESTARTS *CONFIG* UTILITY PROCESSING.)
00465 M01S00421.241l630 ---| CDEF RESET,(RESETS CURRENT EQUIPMENT TO DEFAULT PARAMETERS.)
00466 M01S00422.241l630 ---| CDEF SUSPEND,(SUSPEND ALL SYSTEM OPERATION ON CURRENT EQUIPMENT.)
00467 M01S00423.241l630 ---| CDEF (CH=C1,C2),(C1 AND OPTIONALLY C2 ARE NEW CHANNELS FOR ACCESS.)
| Line S00032 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00468 M01S00032.241l630 +++| CDEF CLEAR,(CLEAR IDLE AND SUSPEND ON CURRENT EQUIPMENT.)
00469 M01S00033.241l630 +++| CDEF END,(CLEAR ALL DEVICE IDLES AND END *CONFIG*.)
00470 M01S00034.241l630 +++| CDEF GO,(INITIATE PROCESSING OF ENTERED CONFIGURATION.)
00471 M01S00035.241l630 +++| CDEF RERUN,(RESTART *CONFIG* UTILITY PROCESSING.)
00472 M01S00036.241l630 +++| CDEF RESET,(RESET CURRENT EQUIPMENT TO DEFAULT PARAMETERS.)
00473 M01S00037.241l630 +++| CDEF SUSPEND,(SUSPEND SYSTEM OPERATION ON CURRENT EQUIPMENT.)
00474 M01S00038.241l630 +++| CDEF (CH=C1,C2),(C1 AND OPTIONALLY C2 ARE NEW ACCESS CHANNELS.)
| Line S00424 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00475 M01S00424.ns22000 ---| CDEF (EQ=EE),(SET EQUIPMENT EE TO BE PROCESSED.)
| Line S00004 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00476 M01S00004.ns22000 +++| CDEF (EQ=EEE),(SET EST ORDINAL EEE TO BE PROCESSED.)
| Line S00425 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00477 M01S00425.241l630 ---| CDEF (UL=U1,U2 .,UN),(SET UNIT LIST AS SPECIFIED.)
| Line S00039 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00478 M01S00039.241l630 +++| CDEF (UL=U1,U2,...),(SET UNIT LIST AS SPECIFIED.)
00479 M00S00426.config +++| CDEF (UR=UU),(UNIT UU IS TO BE RECABLED WITH A NEW DRIVE.)
00480 M00S00427.config +++| TITLE RESERVED LOCATIONS AND FETS.
00481 M00S00428.config +++| ORG 102B
00482 M00S00429.config +++|
00483 M00S00430.config +++|* RESERVED LOCATIONS.
00484 M00S00431.config +++|
00485 M00S00432.config +++|
00486 M00S00433.config +++| FWA BSS 0
00487 M00S00434.config +++| ESTA CON 0 EST ADDRESS
| Line S00005 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00488 M01S00005.ns22000 +++| LMSO CON 0 LAST MASS STORAGE EST ORDINAL + 1
00489 M00S00435.config +++| MMFF CON 0 MULTI-MAINFRAME FLAG
00490 M00S00436.config +++| NPPU CON 0 NUMBER OF PPU-S IN SYSTEM
00491 M00S00437.config +++| SLMP CON 0 STRING BUFFER LIMIT POINTER
00492 M00S00438.config +++| SPTR CON 0 STRING BUFFER POINTER
00493 M00S00439.config +++| TEMP CON 0 TEMPORARY
00494 M00S00440.config +++| SPACE 4,10
00495 M00S00441.config +++|* *1RM* CALL BLOCK.
00496 M00S00442.config +++|
00497 M00S00443.config +++|
00498 M00S00444.config +++| B1RM BSS 0 *1RM* CALL BLOCK
00499 M00S00445.config +++|
00500 M00S00446.config +++| LOC 0
00501 M00S00447.config +++|
00502 M00S00448.config +++|* WHILE *1RM* IS ACTIVE K-DISPLAY INPUT IS INTERPRETED BY
00503 M00S00449.config +++|* *CONFIG* AND THE COMMAND CODE PASSED TO *1RM*. THE
00504 M00S00450.config +++|* COMMANDS WHICH ARE LEGAL FOR *1RM* TO ACCEPT ARE SET IN
00505 M00S00451.config +++|* THE CALL BLOCK BY *1RM* IN THE FORM OF A BIT MAP. THIS
00506 M00S00452.config +++|* BIT MAP IS ALSO USED TO GENERATE A DESCRIPTION OF LEGAL
00507 M00S00453.config +++|* COMMANDS IN THE DISPLAY.
00508 M00S00454.config +++|
00509 M00S00455.config +++| RFNB VFD 48/0
00510 M00S00456.config +++| VFD 11/0 *1RM* FUNCTION CODE
00511 M00S00457.config +++| VFD 1/0 FUNCTION IN PROGRESS BIT
00512 M00S00458.config +++|
00513 M00S00459.config +++| TPAR BSS 0 TABLE OF LEGAL PARAMETERS
00514 M00S00460.config +++| POS .CLEAR
00515 M00S00461.config +++| VFD 1/1
00516 M00S00462.config +++| POS .END
00517 M00S00463.config +++| VFD 1/1
00518 M00S00464.config +++| POS .GO
00519 M00S00465.config +++| VFD 1/1
00520 M00S00466.config +++| POS .RERUN
00521 M00S00467.config +++| VFD 1/1
00522 M00S00468.config +++| POS .RESET
00523 M00S00469.config +++| VFD 1/1
00524 M00S00470.config +++| POS .SUSPEND
00525 M00S00471.config +++| VFD 1/1
00526 M00S00472.config +++| POS .CH
00527 M00S00473.config +++| VFD 1/1
00528 M00S00474.config +++| POS .EQ
00529 M00S00475.config +++| VFD 1/1
00530 M00S00476.config +++| POS .UL
00531 M00S00477.config +++| VFD 1/1
00532 M00S00478.config +++| POS .UR
00533 M00S00479.config +++| VFD 1/1
00534 M00S00480.config +++| TCOM CON 0 COMMANDS TO PASS TO *1RM*
00535 M00S00481.config +++| CUEQ CON 0 CURRENT EQUIPMENT
00536 M00S00482.config +++| URCD CON 0 UNITS TO RECONFIGURE OR RECABLE
00537 M00S00483.config +++| ESTD CON 0 NEW EST ENTRY FOR CURRENT EQUIPMENT
00538 M00S00484.config +++| MSTD BSS MSTL NEW MST FOR CURRENT EQUIPMENT
00539 M00S00485.config +++| LOC *O
00540 M00S00486.config +++| SPACE 4,10
00541 M00S00487.config +++|* FETS.
00542 M00S00488.config +++|
00543 M00S00489.config +++|
00544 M00S00490.config +++| O BSS 0 OUTPUT FILE
00545 M00S00491.config +++| OUTPUT FILEB OBUF,OBUFL,(FET=7)
00546 M00S00492.config +++| TITLE CONFIG - MAIN LOOP.
00547 M00S00493.config +++|** CONFIG - MAIN LOOP.
00548 M00S00494.config +++|
00549 M00S00495.config +++|
00550 M00S00496.config +++| CONFIG SB1 1
00551 M00S00497.config +++| RJ PRS PRESET
00552 M00S00498.config +++| RJ BCL OUTPUT INITIAL CONFIGURATION
00553 M00S00499.config +++|
00554 M00S00500.config +++|* INITIATE K-DISPLAY.
00555 M00S00501.config +++|
00556 M00S00502.config +++| SA1 MMFF
00557 M00S00503.config +++| ZR X1,CON1 IF NOT MMF MODE
00558 M00S00504.config +++| CALL1RM RCDF CLEAR DAT INTERLOCK
00559 M00S00505.config +++| CON1 RJ RRC SET VALUES ON K-DISPLAY
00560 M00S00506.config +++| MX6 -5
00561 M00S00507.config +++| SA6 TEMP
00562 M00S00508.config +++| CONSOLE KL
00563 M00S00509.config +++| CON2 RJ UKD UPDATE K-DISPLAY
00564 M00S00510.config +++| RECALL
00565 M00S00511.config +++| SA1 B1RM+CUEQ CHECK FOR EQUIPMENT PRESENT
00566 M00S00512.config +++| NZ X1,CON3 IF EQUIPMENT PRESENT
00567 M00S00513.config +++| SA1 TEMP
00568 M00S00514.config +++| ZR X1,CON1 IF TIME TO CHECK FOR EQUIPMENT
00569 M00S00515.config +++| SX6 X1+B1
00570 M00S00516.config +++| SA6 A1
00571 M00S00517.config +++|
00572 M00S00518.config +++|* CHECK FOR INPUT.
00573 M00S00519.config +++|
00574 M00S00520.config +++| CON3 SA1 KBUF
00575 M00S00521.config +++| ZR X1,CON2 IF NO INPUT
00576 M00S00522.config +++| RJ ISB INPUT STRING BUFFER
00577 M00S00523.config +++| SX7 B0 ASSEMBLE KEYWORD
00578 M00S00524.config +++| RJ ASC
00579 M00S00525.config +++| ZR X4,CON3 IF NO DATA ASSEMBLED
00580 M00S00526.config +++| SB4 1R=
00581 M00S00527.config +++| NE B4,B5,CON4 IF NOT *=* SEPARATOR
00582 M00S00528.config +++| SX1 6
00583 M00S00529.config +++| IX1 X1*X4
00584 M00S00530.config +++| SX5 B5
00585 M00S00531.config +++| SB4 X1-54
00586 M00S00532.config +++| AX5 B4
00587 M00S00533.config +++| BX6 X6+X5
00588 M00S00534.config +++| CON4 RJ SPT
00589 M00S00535.config +++| NZ X5,CON5 IF PARAMETER NOT FOUND
00590 M00S00536.config +++| SA1 CONA SIMULATE RETURN JUMP
00591 M00S00537.config +++| SB4 X3
00592 M00S00538.config +++| BX6 X1
00593 M00S00539.config +++| SA6 B4
00594 M00S00540.config +++| JP B4+1 JUMP TO PROCESSOR
00595 M00S00541.config +++|
00596 M00S00542.config +++|* RETURN FROM PARAMETER PROCESSING.
00597 M00S00543.config +++|
00598 M00S00544.config +++| CON5 ZR X5,CON3 IF NO ERROR
00599 M00S00545.config +++| RJ IDE PROCESSES ERROR
00600 M00S00546.config +++| EQ CON3 LOOP FOR MORE INPUT
00601 M00S00547.config +++|
| Line S00040 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00602 M01S00040.241l630 +++|
00603 M00S00548.config +++| CONA EQ CON5 SIMULATED RETURN JUMP TO PROCESSOR
00604 M00S00549.config +++| TITLE *1RM* COMMAND DEFINITIONS.
00605 M00S00550.config +++|ABORT SPACE 4,10
00606 M00S00551.config +++|** ABORT - ABORT THE CURRENT COMMAND SEQUENCE.
00607 M00S00552.config +++|
00608 M00S00553.config +++|
00609 M00S00554.config +++| KEYWORD ABORT,0
00610 M00S00555.config +++| IGNORE SPACE 4,10
00611 M00S00556.config +++|** IGNORE - IGNORE CURRENT ERROR CONDITION.
00612 M00S00557.config +++|
00613 M00S00558.config +++|
00614 M00S00559.config +++| KEYWORD IGNORE,0
00615 M00S00560.config +++| NEXT SPACE 4,10
00616 M00S00561.config +++|** NEXT - PROCEED TO NEXT UNIT.
00617 M00S00562.config +++|
00618 M00S00563.config +++|
00619 M00S00564.config +++| KEYWORD NEXT,0
00620 M00S00565.config +++| RECHECK SPACE 4,10
00621 M00S00566.config +++|** RECHECK - RETRY PROCESS GIVING ERROR.
00622 M00S00567.config +++|
00623 M00S00568.config +++|
00624 M00S00569.config +++| KEYWORD RECHECK,0
00625 M00S00570.config +++| TITLE CLC - *CLEAR* COMMAND PROCESSOR.
00626 M00S00571.config +++|** CLC - *CLEAR* COMMAND PROCESSOR.
00627 M00S00572.config +++|*
00628 M00S00573.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT TO RECONFIGURE.
00629 M00S00574.config +++|*
00630 M00S00575.config +++|* EXIT REDEFINITION REQUEST CLEARED FOR CURRENT EQUIPMENT.
00631 M00S00576.config +++|*
00632 M00S00577.config +++|* USES A - 1, 6.
00633 M00S00578.config +++|* X - 1, 5, 6.
00634 M00S00579.config +++|*
00635 M00S00580.config +++|* MACRO CALL1RM.
00636 M00S00581.config +++|
00637 M00S00582.config +++|
00638 M00S00583.config +++| KEYWORD CLEAR,CLP
00639 M00S00584.config +++| SA1 B1RM+CUEQ
00640 M00S00585.config +++| ZR X1,CLPX IF NO EQUIPMENT
00641 M00S00586.config +++| RJ FUM CHECK FOR UNIT IN USE
00642 M00S00587.config +++| NZ X5,CLPX IF ERROR DETECTED
00643 M00S00588.config +++| CALL1RM RCLF
00644 M00S00589.config +++| RJ RRC SET NEW EQUIPMENT
00645 M00S00590.config +++| EQ CLPX RETURN
00646 M00S00591.config +++| TITLE END - END COMMAND PROCESSOR.
00647 M00S00592.config +++|** END - *END* COMMAND PROCESSOR.
00648 M00S00593.config +++|*
00649 M00S00594.config +++|* COMPLETE RECONFIGURATION RUN.
00650 M00S00595.config +++|*
00651 M00S00596.config +++|* USES X - 1, 5.
00652 M00S00597.config +++|* A - 1.
00653 M00S00598.config +++|* B - 0.
00654 M00S00599.config +++|*
00655 M00S00600.config +++|* CALLS CAE.
00656 M00S00601.config +++|*
00657 M00S00602.config +++|* MACROS CALL1RM, EXCST, KEYWORD, MESSAGE, SETFS.
00658 M00S00603.config +++|
00659 M00S00604.config +++|
00660 M00S00605.config +++| KEYWORD END,END
00661 M00S00606.config +++| END1 RJ CAE CLEAR ALL EQUIPMENT IDLE REQUESTS
00662 M00S00607.config +++| SA1 MMFF
00663 M00S00608.config +++| ZR X1,END2 IF NOT MMF MODE
00664 M00S00609.config +++| CALL1RM RCDF CLEAR DAT INTERLOCK
00665 M00S00610.config +++| END2 SA1 B1RM+RFNB
00666 M00S00611.config +++| SX5 B0+ INDICATE NO ERROR
00667 M00S00612.config +++| NZ X1,ENDX IF *1RM* STILL ATTACHED
00668 M00S00613.config +++| MESSAGE ENDA * CONFIG UTILITY COMPLETE.*
00669 M00S00614.config +++| SETFS O,0
00670 M00S00615.config +++| EXCST ENDB FORCE CALL TO *CMS*
00671 M00S00616.config +++| ENDRUN
00672 M00S00617.config +++|
| Line S00041 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00673 M01S00041.241l630 +++|
00674 M00S00618.config +++| ENDA DATA C* CONFIG UTILITY COMPLETE.*
00675 M00S00619.config +++| ENDB DATA 4LCMS.
00676 M00S00620.config +++| TITLE GOC - *GO* COMMAND PROCESSOR.
00677 M00S00621.config +++|** GOC - *GO* COMMAND PROCESSOR.
00678 M00S00622.config +++|*
00679 M00S00623.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT TO RECONFIGURE.
00680 M00S00624.config +++|*
00681 M00S00625.config +++|* EXIT (X5) = ERROR MESSAGE ADDRESS.
00682 M00S00626.config +++|*
00683 M00S00627.config +++|* USES A - 1, 2, 3, 4, 6, 7.
00684 M00S00628.config +++|* X - ALL.
00685 M00S00629.config +++|*
00686 M00S00630.config +++|* CALLS BCL, CLD, FUM.
00687 M00S00631.config +++|*
00688 M00S00632.config +++|* MACROS CALL1RM, KEYWORD.
00689 M00S00633.config +++|
00690 M00S00634.config +++|
00691 M00S00635.config +++| KEYWORD GO,GOC
00692 M00S00636.config +++| RJ CLD CHECK FOR LEGAL DEVICE
| Line S00637 Modification History |
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00693 M01S00637.v23l617 ---| NZ X5,GOCX IF ILLEGAL DEVICE
| Line S00009 Modification History |
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act
----------------------------+
00694 M01S00009.v23l617 +++| NZ X5,GOCX IF INCORRECT DEVICE
00695 M00S00638.config +++| RJ FUM FIND UNIT IN OTHER MST
00696 M00S00639.config +++| NZ X5,GOCX IF ERROR IN CONFIGURATION
00697 M00S00640.config +++| CALL1RM RDDF
00698 M00S00641.config +++| RJ BCL BUILD CONFIGURATION LIST
00699 M00S00642.config +++| RJ RRC RESET NEW EQUIPMENT
00700 M00S00643.config +++| EQ GOCX RETURN
| Line S00644 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00701 M01S00644.ns22000 ---|
00702 M01S00645.ns22000 ---| GOCD DATA C*EQXX REDEFINITION COMPLETE.*
00703 M00S00646.config +++| TITLE RRC - *RERUN* COMMAND PROCESSOR.
00704 M00S00647.config +++|** RRC - *RERUN* COMMAND PROCESSOR.
00705 M00S00648.config +++|*
00706 M00S00649.config +++|* ENTRY (ESTA) = EST ADDRESS.
00707 M00S00650.config +++|* (MMFF) .NE. 0 IF MMF MODE.
00708 M00S00651.config +++|*
00709 M00S00652.config +++|* EXIT (X1) = CURRENT EQUIPMENT.
00710 M00S00653.config +++|* (X5) = ERROR MESSAGE.
00711 M00S00654.config +++|* (CUEQ) = CURRENT EQUIPMENT TO RECONFIGURE.
00712 M00S00655.config +++|* (CUEQ), (ESTB), (MSTD), AND K-DISPLAY RESET.
00713 M00S00656.config +++|*
00714 M00S00657.config +++|* USES A - 1, 2, 5, 6, 7.
00715 M00S00658.config +++|* B - 5, 6.
00716 M00S00659.config +++|* X - 0, 1, 2, 5, 6, 7.
00717 M00S00660.config +++|*
| Line S00661 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00718 M01S00661.ns22000 ---|* CALLS DBL, DUL, RMT, RSC, SML.
| Line S00006 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00719 M01S00006.ns22000 +++|* CALLS EST, RSC, SML.
00720 M00S00662.config +++|*
00721 M00S00663.config +++|* MACROS CALL1RM, GETLCW, KEYWORD.
00722 M00S00664.config +++|
00723 M00S00665.config +++|
00724 M00S00666.config +++| KEYWORD RERUN,RRC
00725 M00S00667.config +++| CALL1RM RUMF
| Line S00668 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00726 M01S00668.ns22000 ---| SA2 ESTA
00727 M01S00669.ns22000 ---| GETLCW NMSD,X2,ESTB
| Line S00007 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00728 M01S00007.ns22000 +++| RJ EST READ EST INTO *ESTB*
00729 M00S00670.config +++|
00730 M00S00671.config +++|* SEARCH FOR EQUIPMENT TO RECONFIGURE.
00731 M00S00672.config +++|
| Line S00673 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00732 M01S00673.ns22000 ---| SX5 B0 INITIALIZE SEARCH LOOP
| Line S00008 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00733 M01S00008.ns22000 +++| SX5 NOPE-1 INITIALIZE EST ORDINAL FOR SEARCH
00734 M00S00674.config +++| SB5 B0 SET EQUIPMENT NOT FOUND
00735 M00S00675.config +++| BX6 X6-X6 CLEAR CURRENT EQUIPMENT
| Line S00676 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00736 M01S00676.ns22000 ---| SB6 B0 SET SHARED EQUIPMENT NUMBER
| Line S00009 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00737 M01S00009.ns22000 +++| SB6 B0 SET SHARED EST ORDINAL
00738 M00S00677.config +++| SA6 B1RM+CUEQ
00739 M00S00678.config +++| SA6 B1RM+URCD CLEAR UNITS TO RECONFIGURE
00740 M00S00679.config +++| RRC1 RJ SML FIND EQUIPMENT
00741 M00S00680.config +++| ZR X5,RRC3 IF END OF EQUIPMENTS
00742 M00S00681.config +++| PL X1,RRC1 IF DEVICE IDLE BIT NOT SET
00743 M00S00682.config +++| NZ B5,RRC2 IF EQUIPMENT PREVIOUSLY FOUND
00744 M00S00683.config +++| SB5 X5
| Line S00684 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00745 M01S00684.ns22000 ---| RRC2 SA1 ESTB+X5 CHECK FOR SHARED
| Line S00010 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00746 M01S00010.ns22000 +++| RRC2 R= X1,ESTE CHECK FOR SHARED DEVICE
00747 M01S00011.ns22000 +++| IX1 X5*X1
00748 M01S00012.ns22000 +++| SA1 ESTB+X1+EQDE READ EST ENTRY
00749 M00S00685.config +++| LX1 59-57
00750 M00S00686.config +++| PL X1,RRC1 IF NOT SHARED
00751 M00S00687.config +++| NZ B6,RRC1 IF SHARED EQUIPMENT FOUND
00752 M00S00688.config +++| SB6 X5
00753 M00S00689.config +++| EQ RRC1 NEXT EQUIPMENT
00754 M00S00690.config +++|
00755 M00S00691.config +++| RRC3 SX6 B6
00756 M00S00692.config +++| NZ B6,RRC4 IF SHARED EQUIPMENT FOUND
00757 M00S00693.config +++| SX6 B5
00758 M00S00694.config +++| RRC4 SA6 B1RM+CUEQ
00759 M00S00695.config +++| RJ RSC RESET PARAMETERS
00760 M00S00696.config +++| SA1 B1RM+CUEQ
00761 M00S00697.config +++| SX5 B0
00762 M00S00698.config +++| EQ RRCX RETURN
00763 M00S00699.config +++| TITLE RSC - *RESET* COMMAND PROCESSOR.
00764 M00S00700.config +++|** RSC - *RESET* COMMAND PROCESSOR.
00765 M00S00701.config +++|*
00766 M00S00702.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT.
00767 M00S00703.config +++|*
00768 M00S00704.config +++|* EXIT (X5) = 0.
00769 M00S00705.config +++|*
00770 M00S00706.config +++|* USES A - 1, 2, 6, 7.
00771 M00S00707.config +++|* B - 2, 3, 5, 6, 7.
00772 M00S00708.config +++|* X - 0, 1, 2, 4, 5, 6, 7.
00773 M00S00709.config +++|*
00774 M00S00710.config +++|* CALLS COD, ZTB.
00775 M00S00711.config +++|*
00776 M00S00712.config +++|* MACROS KEYWORD, MOVE.
00777 M00S00713.config +++|
00778 M00S00714.config +++|
00779 M00S00715.config +++| KEYWORD RESET,RSC
00780 M00S00716.config +++| SA5 B1RM+CUEQ
| Line S00717 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00781 M01S00717.ns22000 ---| SA1 ESTB+X5 RESET EST ENTRY
| Line S00013 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00782 M01S00013.ns22000 +++| R= X1,ESTE
00783 M01S00014.ns22000 +++| IX1 X5*X1
00784 M01S00015.ns22000 +++| SA1 ESTB+X1+EQDE RESET EST ENTRY
00785 M00S00718.config +++| BX6 X1
00786 M00S00719.config +++| BX7 X7-X7
00787 M00S00720.config +++| SA6 B1RM+ESTD
00788 M00S00721.config +++| SA7 B1RM+URCD CLEAR UNITS TO RECONFIGURE
00789 M00S00722.config +++| RJ RMT READ CURRENT EQUIPMENT MST
00790 M00S00723.config +++| MOVE MSTL,MSTB,MSTC
00791 M00S00724.config +++| MOVE MSTL,MSTB,B1RM+MSTD
00792 M00S00725.config +++| RJ UKD UPDATE K-DISPLAY INFORMATION
00793 M00S00726.config +++| EQ RSCX RETURN
00794 M00S00727.config +++| TITLE SSP - *SUSPEND* COMMAND PROCESSOR.
00795 M00S00728.config +++|** SSP - *SUSPEND* COMMAND PROCESSOR.
00796 M00S00729.config +++|* ONLY 885 AND 844 TYPE DEVICES ARE ALLOWED FOR THIS
00797 M00S00730.config +++|* COMMAND. THIS IS BECAUSE THE *6DI* DRIVER IS THE
00798 M00S00731.config +++|* ONLY ONE TO DETECT AND HONOR THE SUSPEND STATUS.
00799 M00S00732.config +++|*
00800 M00S00733.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT.
00801 M00S00734.config +++|*
00802 M00S00735.config +++|* EXIT (X5) = ERROR MESSAGE ADDRESS.
00803 M00S00736.config +++|*
00804 M00S00737.config +++|* USES X - 1, 5.
00805 M00S00738.config +++|* A - 1.
00806 M00S00739.config +++|*
00807 M00S00740.config +++|* CALLS EQP.
00808 M00S00741.config +++|*
00809 M00S00742.config +++|* MACROS CALL1RM, KEYWORD.
00810 M00S00743.config +++|
00811 M00S00744.config +++|
00812 M00S00745.config +++| KEYWORD SUSPEND,SSP
00813 M00S00746.config +++| SA1 B1RM+CUEQ
00814 M00S00747.config +++| ZR X1,SSPX IF NO EQUIPMENT
00815 M00S00748.config +++| SA1 B1RM+ESTD CHECK FOR 885 OR 844
00816 M00S00749.config +++| LX1 59-55
| Line S00750 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00817 M01S00750.ns22000 ---| SX5 EREN **** ERROR IN EQUIPMENT NUMBER.
| Line S00016 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00818 M01S00016.ns22000 +++| SX5 EREN **** ERROR IN EST ORDINAL.
00819 M00S00751.config +++| PL X1,SSPX IF NOT *LDAM*
00820 M00S00752.config +++| CALL1RM RSPF
00821 M00S00753.config +++| EQ SSPX RETURN
00822 M00S00754.config +++| TITLE CHP - *CH* PARAMETER PROCESSOR.
00823 M00S00755.config +++|** CHP - *CH* PARAMETER PROCESSOR.
00824 M00S00756.config +++|*
00825 M00S00757.config +++|* ENTRY (SPTR) = STRING BUFFER ADDRESS OF PREVIOUS CHARACTER.
00826 M00S00758.config +++|* (SLMP) = STRING BUFFER LIMIT POINTER.
00827 M00S00759.config +++|*
00828 M00S00760.config +++|* EXIT (X5) = 0 IF NO ERROR.
00829 M00S00761.config +++|* = ERROR MESSAGE ADDRESS IF ERROR.
00830 M00S00762.config +++|* (SPTR) = UPDATED STRING BUFFER POINTER.
00831 M00S00763.config +++|* VALUE SET IN K-DISPLAY AND PARAMETER TABLE.
00832 M00S00764.config +++|*
| Line S00765 Modification History |
M01 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
00833 M01S00765.ns2550 ---|* USES X - 0, 1, 2, 5, 6.
00834 M01S00766.ns2550 ---|* A - 1, 2, 6.
| Line S00001 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
00835 M01S00001.ns2550 +++|* USES X - 0, 1, 2, 5, 6.
00836 M01S00002.ns2550 +++|* A - 1, 2, 6.
00837 M00S00767.config +++|* B - 1, 2.
00838 M00S00768.config +++|*
00839 M00S00769.config +++|* CALLS CCH, CHA, VON.
00840 M00S00770.config +++|
00841 M00S00771.config +++|
00842 M00S00772.config +++| KEYWORD CH=,CHP
00843 M00S00773.config +++| SX0 3 VALIDATE CHANNEL NUMBER
00844 M00S00774.config +++| RJ VON
00845 M00S00775.config +++| NZ X5,CHPX IF ERROR
| Line S00003 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
00846 M01S00003.ns2550 +++| SX0 1S11 ACCESS PATH ENABLED FLAG
00847 M01S00004.ns2550 +++| SX2 X6
00848 M01S00005.ns2550 +++| BX6 X0+X6
| Line S00006 Modification History |
M01 (Added by) | ns2550 |
M02 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00849 M02S00006.confi4 ---| LX6 12
| Line S00776 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00850 M01S00776.confi4 ---| SA6 CHPA SAVE CHANNEL
00851 M00S00777.config +++|
00852 M00S00778.config +++|* CHECK THAT CHANNELS ARE AVAILABLE.
00853 M00S00779.config +++|
| Line S00780 Modification History |
M01 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
00854 M01S00780.ns2550 ---| SX2 X6
00855 M00S00781.config +++| RJ CHA
00856 M00S00782.config +++| NZ X5,CHPX IF ERROR IN CHANNEL NUMBER
| Line S00001 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00857 M01S00001.confi4 +++| PL X1,CHP1 IF CHANNEL IS UP
00858 M01S00002.confi4 +++| SX0 3000B MARK CHANNEL DOWN
00859 M01S00003.confi4 +++| BX6 X0+X6
00860 M01S00004.confi4 +++| CHP1 LX6 12 SAVE CHANNEL
00861 M01S00005.confi4 +++| SA6 CHPA
00862 M00S00783.config +++|
00863 M00S00784.config +++|* CHECK FOR SECOND CHANNEL.
00864 M00S00785.config +++|
00865 M00S00786.config +++| SX0 3
00866 M00S00787.config +++| RJ VON
00867 M00S00788.config +++| NZ X5,CHPX IF ERROR
| Line S00789 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00868 M01S00789.confi4 ---| ZR X4,CHP1 IF NO SECOND CHANNEL
| Line S00006 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00869 M01S00006.confi4 +++| ZR X4,CHP3 IF NO SECOND CHANNEL
| Line S00790 Modification History |
M01 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
00870 M01S00790.ns2550 ---| ZR X6,CHP1 IF SECOND CHANNEL ZERO
| Line S00007 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
00871 M01S00007.ns2550 +++| SX0 1S11 ACCESS PATH ENABLED FLAG
00872 M00S00791.config +++| SA1 CHPA SAVE CHANNEL NUMBER
| Line S00792 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00873 M01S00792.confi4 ---| SX2 X6
| Line S00007 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00874 M01S00007.confi4 +++| SX2 X6+
| Line S00008 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
00875 M01S00008.ns2550 +++| BX6 X0+X6
| Line S00793 Modification History |
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
00876 M01S00793.252l678 ---| LX6 6
| Line S00001 Modification History |
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
00877 M02S00001.ns2550 ---| LX6 12
00878 M00S00794.config +++| BX6 X1+X6
| Line S00795 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00879 M01S00795.confi4 ---| SA6 A1
00880 M00S00796.config +++| RJ CHA
00881 M00S00797.config +++| NZ X5,CHPX IF ERROR IN CHANNEL NUMBER
| Line S00008 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00882 M01S00008.confi4 +++| PL X1,CHP2 IF CHANNEL IS UP
00883 M01S00009.confi4 +++| SX0 3000B MARK CHANNEL DOWN
00884 M01S00010.confi4 +++| BX6 X0+X6
| Line S00798 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00885 M01S00798.confi4 ---| CHP1 SA1 B1RM+ESTD INSERT CHANNELS IN REPLACEMENT ENTRY
| Line S00011 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00886 M01S00011.confi4 +++| CHP2 SA6 CHPA SAVE CHANNEL
00887 M01S00012.confi4 +++| CHP3 SA1 B1RM+ESTD INSERT CHANNELS IN REPLACEMENT ENTRY
00888 M00S00799.config +++| SA2 CHPA
| Line S00800 Modification History |
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
00889 M01S00800.252l678 ---| MX0 12
00890 M01S00801.252l678 ---| LX2 36
| Line S00002 Modification History |
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
00891 M01S00002.252l678 +++| MX0 24
00892 M01S00003.252l678 +++| LX2 24
00893 M00S00802.config +++| LX0 -12
| Line S00803 Modification History |
M01 (Removed by) | confi1a |
Seq # *Modification Id* Act
----------------------------+
00894 M01S00803.confi1a ---| BX1 -X0*X1 CLEAR CHANNEL FIELD
00895 M01S00804.confi1a ---| BX6 X2+X1
00896 M01S00805.confi1a ---| BX1 X2+X1
| Line S00001 Modification History |
M01 (Added by) | confi1a |
Seq # *Modification Id* Act
----------------------------+
00897 M01S00001.confi1a +++| BX6 -X0*X1 CLEAR CHANNEL FIELD
00898 M01S00002.confi1a +++| BX6 X2+X6
00899 M00S00806.config +++| SA6 A1
00900 M00S00807.config +++| RJ CCH CHECK FOR MATCHING CHANNELS
| Line S00808 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00901 M01S00808.confi4 ---| NZ X1,CHP2 IF AT LEAST ONE CHANNEL MATCHES
| Line S00013 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00902 M01S00013.confi4 +++| NZ X1,CHP4 IF AT LEAST ONE CHANNEL MATCHES
00903 M00S00809.config +++|
00904 M00S00810.config +++|* SET *URCD* TO INDICATE ALL UNITS CHANGED.
00905 M00S00811.config +++|
00906 M00S00812.config +++| SA1 B1RM+MSTD+DDLL GET UNIT COUNT
00907 M00S00813.config +++| AX1 48
| Line S00814 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00908 M01S00814.ns22000 ---| MX0 -6
| Line S00017 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00909 M01S00017.ns22000 +++| MX0 -3
00910 M00S00815.config +++| BX1 -X0*X1
00911 M00S00816.config +++| SB2 X1
00912 M00S00817.config +++| MX6 1
00913 M00S00818.config +++| AX6 B2
00914 M00S00819.config +++| SB2 B2+B1
00915 M00S00820.config +++| LX6 B2
00916 M00S00821.config +++| SA1 B1RM+URCD MERGE CHANGED UNITS
00917 M00S00822.config +++| BX6 X1+X6
00918 M00S00823.config +++| SA6 A1
| Line S00824 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00919 M01S00824.confi4 ---| CHP2 RJ SEQ SET EQUIPMENT PARAMETERS IN K-DISPLAY
| Line S00014 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
00920 M01S00014.confi4 +++| CHP4 RJ SEQ SET EQUIPMENT PARAMETERS IN K-DISPLAY
00921 M00S00825.config +++| BX5 X5-X5 CLEAR ERROR STATUS
00922 M00S00826.config +++| EQ CHPX RETURN
00923 M00S00827.config +++|
| Line S00042 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
00924 M01S00042.241l630 +++|
00925 M00S00828.config +++| CHPA CON 0 TEMPORARY
00926 M00S00829.config +++| TITLE EQP - *EQ* PARAMETER PROCESSOR.
00927 M00S00830.config +++|** EQP - *EQ* PARAMETER PROCESSOR.
00928 M00S00831.config +++|* ANY MASS STORAGE DEVICE IS ALLOWED FOR THIS COMMAND.
00929 M00S00832.config +++|* THIS IS BECAUSE DEVICE IDLE MAY BE SET FOR ANY MASS
00930 M00S00833.config +++|* STORAGE DEVICE.
00931 M00S00834.config +++|*
00932 M00S00835.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT.
00933 M00S00836.config +++|* (SPTR) = STRING BUFFER ADDRESS OF PREVIOUS CHARACTER.
00934 M00S00837.config +++|* (SLMP) = STRING BUFFER LIMIT POINTER.
00935 M00S00838.config +++|*
00936 M00S00839.config +++|* EXIT (X5) = 0 IF NO ERROR.
00937 M00S00840.config +++|* = ERROR MESSAGE ADDRESS IF ERROR.
00938 M00S00841.config +++|* (SPTR) = UPDATED STRING BUFFER POINTER.
00939 M00S00842.config +++|* K-DISPLAY UPDATED TO SHOW NEW EQUIPMENT.
00940 M00S00843.config +++|*
00941 M00S00844.config +++|* USES X - 0, 4, 5, 6.
00942 M00S00845.config +++|* A - 6.
00943 M00S00846.config +++|* B - 0.
00944 M00S00847.config +++|*
00945 M00S00848.config +++|* CALLS CLD, RSC, VON.
00946 M00S00849.config +++|
00947 M00S00850.config +++|
00948 M00S00851.config +++| KEYWORD EQ=,EQP
| Line S00852 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00949 M01S00852.ns22000 ---| SX0 3 VALIDATE EQUIPMENT NUMBER
| Line S00018 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00950 M01S00018.ns22000 +++| SX0 3+1 VALIDATE EST ORDINAL
00951 M00S00853.config +++| RJ VON
00952 M00S00854.config +++| NZ X5,EQPX IF ERROR
00953 M00S00855.config +++| ZR X4,EQP1 IF NO EQUIPMENT ENTERED
00954 M00S00856.config +++| SA6 B1RM+CUEQ SET EQUIPMENT
00955 M00S00857.config +++| EQP1 RJ CLD CHECK FOR LEGAL DEVICE
00956 M00S00858.config +++| NZ X5,EQP2 IF ERROR IN EQUIPMENT
00957 M00S00859.config +++| RJ RSC RESET PARAMETERS
00958 M00S00860.config +++| SX5 B0
00959 M00S00861.config +++| EQ EQPX RETURN
00960 M00S00862.config +++|
00961 M00S00863.config +++| EQP2 SX6 B0 CLEAR CURRENT EQUIPMENT
| Line S00864 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00962 M01S00864.ns22000 ---| SX5 EREN **** ERROR IN EQUIPMENT NUMBER.
| Line S00019 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
00963 M01S00019.ns22000 +++| SX5 EREN **** ERROR IN EST ORDINAL.
00964 M00S00865.config +++| SA6 B1RM+CUEQ
00965 M00S00866.config +++| RJ RSC RESET PARAMETERS
00966 M00S00867.config +++| EQ EQPX RETURN
00967 M00S00868.config +++| TITLE ULP - UNIT LIST PARAMETER PROCESSOR.
00968 M00S00869.config +++|** ULP - *UL=* PARAMETER PROCESSOR.
00969 M00S00870.config +++|*
00970 M00S00871.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT.
00971 M00S00872.config +++|*
00972 M00S00873.config +++|* EXIT (MSTD) UPDATED WITH NEW UNIT LIST.
00973 M00S00874.config +++|* K-DISPLAY UPDATED WITH NEW CONFIGURATION.
00974 M00S00875.config +++|*
00975 M00S00876.config +++|* USES X - 0, 1, 2, 3, 4, 5, 6, 7.
00976 M00S00877.config +++|* A - 1, 6.
00977 M00S00878.config +++|* B - 3, 4, 5.
00978 M00S00879.config +++|*
00979 M00S00880.config +++|* CALLS SEQ, VON.
00980 M00S00881.config +++|*
00981 M00S00882.config +++|* MACRO KEYWORD.
00982 M00S00883.config +++|
00983 M00S00884.config +++|
00984 M00S00885.config +++| ULP8 SX5 ERUN **** ERROR IN UNIT LIST.
00985 M00S00886.config +++|
00986 M00S00887.config +++| KEYWORD UL=,ULP
00987 M00S00888.config +++| BX6 X6-X6 CLEAR ASSEMBLY
00988 M00S00889.config +++| PX6 X6
00989 M00S00890.config +++| SA6 ULPA
00990 M00S00891.config +++| ULP1 SX0 3 VALIDATE UNIT NUMBERS
00991 M00S00892.config +++| RJ VON
00992 M00S00893.config +++| NZ X5,ULPX IF ERROR IN ASSEMBLY
00993 M00S00894.config +++| ZR X4,ULP4 IF NO DIGITS
00994 M00S00895.config +++| SA1 ULPA
00995 M00S00896.config +++| UX1,B4 X1
00996 M00S00897.config +++| SB3 B4+B4 COMPUTE SHIFT COUNT FOR NEW UNIT
00997 M00S00898.config +++| SB3 B3+B4
00998 M00S00899.config +++| SB3 B3+B3
00999 M00S00900.config +++| SB4 B4+B1
01000 M00S00901.config +++| LX4 X6,B3 POSITION NEW UNIT
01001 M00S00902.config +++| BX6 X1+X4
01002 M00S00903.config +++| PX6 X6,B4
01003 M00S00904.config +++| SA6 ULPA
01004 M00S00905.config +++| SA2 B1RM+ESTD CHECK FOR 885
01005 M00S00906.config +++| MX0 -11
01006 M00S00907.config +++| LX2 -12
01007 M00S00908.config +++| BX2 -X0*X2
01008 M00S00909.config +++| SX3 X2-2RDM
01009 M00S00910.config +++| SX2 X2-2RDQ
01010 M00S00911.config +++| ZR X3,ULP2 IF 885
01011 M00S00912.config +++| NZ X2,ULP3 IF NOT 885
01012 M00S00913.config +++| ULP2 AX4 B3 CHECK NUMBER OF UNITS AND UNIT NUMBER
01013 M00S00914.config +++| SB3 3
01014 M00S00915.config +++| LX4 59-5
01015 M00S00916.config +++| GT B4,B3,ULP8 IF MORE THAN 3 UNITS
01016 M00S00917.config +++| PL X4,ULP8 IF UNIT NUMBER NOT 4X OR 5X
01017 M00S00918.config +++| LX4 59-4-59+5
01018 M00S00919.config +++| NG X4,ULP8 IF UNIT NUMBER NOT 4X OR 5X
01019 M00S00920.config +++| ULP3 SX1 B5-1R,
01020 M00S00921.config +++| ZR X1,ULP1 IF MORE UNITS
01021 M00S00922.config +++| SX1 B5-1R.
01022 M00S00923.config +++| SX5 ERIS **** ERROR IN SEPARATOR.
01023 M00S00924.config +++| NZ X1,ULPX IF NOT END OF LINE
01024 M00S00925.config +++| ULP4 SA1 ULPA BUILD DDLL WORD
01025 M00S00926.config +++| UX1,B4 X1
01026 M00S00927.config +++| ZR B4,ULP5 IF NULL EQUIPMENT
01027 M00S00928.config +++| SB4 B4-2000B
01028 M00S00929.config +++| ULP5 PX6 X6,B4
01029 M00S00930.config +++| SA1 B1RM+MSTD+DDLL
01030 M00S00931.config +++| SA6 A1
01031 M00S00932.config +++| MX0 -6
01032 M00S00933.config +++| MX3 1 INITIALIZE LOOP PARAMETERS
01033 M00S00934.config +++| BX4 X4-X4
01034 M00S00935.config +++| MX2 -8 LOOP COUNTER
01035 M00S00936.config +++| ULP6 ZR X2,ULP7 IF END OF LOOP
01036 M00S00937.config +++| BX7 X1-X6
01037 M00S00938.config +++| BX7 -X0*X7
01038 M00S00939.config +++| LX0 6 ADVANCE UNIT
01039 M00S00940.config +++| AX2 1
01040 M00S00941.config +++| LX3 1
01041 M00S00942.config +++| ZR X7,ULP6 IF NO CHANGE IN UNIT NUMBER
01042 M00S00943.config +++| BX4 X4+X3
01043 M00S00944.config +++| EQ ULP6 CHECK NEXT UNIT
01044 M00S00945.config +++|
01045 M00S00946.config +++| ULP7 SA1 B1RM+URCD MERGE BITS IN CALL BLOCK
01046 M00S00947.config +++| BX6 X1+X4
01047 M00S00948.config +++| SA6 A1
01048 M00S00949.config +++| RJ SEQ SET EQUIPMENT PARAMETERS IN DISPLAY
01049 M00S00950.config +++| EQ ULPX RETURN
01050 M00S00951.config +++|
| Line S00043 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01051 M01S00043.241l630 +++|
01052 M00S00952.config +++| ULPA CON 0 SCRATCH LOCATION
01053 M00S00953.config +++| URP TITLE URP - UNITS FOR RECABLING PARAMETER PROCESSOR.
01054 M00S00954.config +++|** URP - *UR=* PARAMETER PROCESSOR.
01055 M00S00955.config +++|*
01056 M00S00956.config +++|* ENTRY (URCD) = CURRENT LIST OF UNITS.
01057 M00S00957.config +++|* (MSTD) = CURRENT REDEFINITION PARAMETERS.
01058 M00S00958.config +++|*
01059 M00S00959.config +++|* EXIT (X5) = ERROR MESSAGE ADDRESS.
01060 M00S00960.config +++|*
01061 M00S00961.config +++|* USES X - 0, 1, 2, 3, 5, 6.
01062 M00S00962.config +++|* A - 1, 6.
01063 M00S00963.config +++|* B - 1, 2.
01064 M00S00964.config +++|*
01065 M00S00965.config +++|* CALLS VON.
01066 M00S00966.config +++|*
01067 M00S00967.config +++|* MACRO KEYWORD.
01068 M00S00968.config +++|
01069 M00S00969.config +++|
01070 M00S00970.config +++| URP2 SA1 B1RM+URCD ADD UNIT TO LIST
01071 M00S00971.config +++| BX6 X1+X3
01072 M00S00972.config +++| SA6 A1
01073 M00S00973.config +++| RJ SEQ SET EQUIPMENT PARAMETERS IN K-DISPLAY
01074 M00S00974.config +++|
01075 M00S00975.config +++| KEYWORD UR=,URP ENTRY/EXIT
01076 M00S00976.config +++| SX0 3 ASSEMBLE UNIT NUMBER
01077 M00S00977.config +++| RJ VON
01078 M00S00978.config +++| NZ X5,URPX IF ERROR IN ASSEMBLY
01079 M00S00979.config +++|
01080 M00S00980.config +++|* FIND UNIT IN CURRENT UNIT LIST.
01081 M00S00981.config +++|
01082 M00S00982.config +++| SA1 B1RM+MSTD+DDLL
01083 M00S00983.config +++| MX0 -6
| Line S00020 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01084 M01S00020.ns22000 +++| MX2 -3
01085 M00S00984.config +++| LX1 -48
| Line S00985 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01086 M01S00985.ns22000 ---| BX2 -X0*X1
| Line S00021 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01087 M01S00021.ns22000 +++| BX2 -X2*X1
01088 M00S00986.config +++| LX1 48
01089 M00S00987.config +++| SB2 X2 SET UNIT COUNT
01090 M00S00988.config +++| SX3 B1 SET UNIT MASK
01091 M00S00989.config +++| URP1 BX5 X6-X1 CHECK FOR UNIT NUMBER MATCH
01092 M00S00990.config +++| BX5 -X0*X5
01093 M00S00991.config +++| ZR X5,URP2 IF MATCH
01094 M00S00992.config +++| SB2 B2-B1 ADVANCE UNIT NUMBER
01095 M00S00993.config +++| AX1 6
01096 M00S00994.config +++| LX3 1
01097 M00S00995.config +++| PL B2,URP1 IF MORE UNITS TO CHECK
01098 M00S00996.config +++| SX5 ERUN **** ERROR IN UNIT LIST.
01099 M00S00997.config +++| EQ URPX RETURN
01100 M00S00998.config +++| TITLE UTILITY SUBROUTINES.
01101 M00S00999.config +++| ASC SPACE 4,20
01102 M00S01000.config +++|** ASC - ASSEMBLE CHARACTERS.
01103 M00S01001.config +++|*
01104 M00S01002.config +++|* ENTRY (SPTR) = STRING BUFFER ADDRESS OF PREVIOUS CHARACTER.
01105 M00S01003.config +++|* (SLMP) = STRING BUFFER LIMIT POINTER.
01106 M00S01004.config +++|* (X7) = 1 IF IGNORE LEADING ZEROES.
01107 M00S01005.config +++|*
01108 M00S01006.config +++|* EXIT (X4) = NUMBER OF CHARACTERS ASSEMBLED.
01109 M00S01007.config +++|* (X5) = RIGHT JUSTIFIED ASSEMBLED CHARACTERS.
01110 M00S01008.config +++|* (X6) = LEFT JUSTIFIED ASSEMBLED CHARACTERS.
01111 M00S01009.config +++|* (B5) = SEPARATOR.
01112 M00S01010.config +++|* (SPTR) = UPDATED STRING BUFFER ADDRESS.
01113 M00S01011.config +++|*
01114 M00S01012.config +++|* USES A - 1, 4, 6, 7.
01115 M00S01013.config +++|* X - 1, 2, 3, 4, 5, 6, 7.
01116 M00S01014.config +++|* B - 2, 3, 4, 5, 7.
01117 M00S01015.config +++|
01118 M00S01016.config +++|
01119 M00S01017.config +++|* PROCESS END OF BUFFER.
01120 M00S01018.config +++|
01121 M00S01019.config +++| ASC3 SA4 SLMP SET STRING BUFFER EMPTY
01122 M00S01020.config +++| SB2 X4+
01123 M00S01021.config +++| SB5 1R. SET TERMINATOR
01124 M00S01022.config +++|
01125 M00S01023.config +++|* SET ASSEMBLED CHARACTERS.
01126 M00S01024.config +++|
01127 M00S01025.config +++| ASC4 SX4 10 CALCULATE NUMBER OF CHARACTERS
01128 M00S01026.config +++| SX3 B4
01129 M00S01027.config +++| IX4 X4-X3
01130 M00S01028.config +++| SX6 B2 SET BUFFER POINTER
01131 M00S01029.config +++| SA6 SPTR
01132 M00S01030.config +++| BX6 X6-X6
01133 M00S01031.config +++| ZR X4,ASCX IF NO CHARACTERS ASSEMBLED
01134 M00S01032.config +++| SX2 6 LEFT JUSTIFY CHARACTERS
01135 M00S01033.config +++| IX3 X3*X2
01136 M00S01034.config +++| SB4 X3
01137 M00S01035.config +++| LX6 X5,B4
01138 M00S01036.config +++|
01139 M00S01037.config +++| ASC SUBR ENTRY/EXIT
01140 M00S01038.config +++| SA7 ASCA INITIALIZE IGNORE ZEROES FLAG
01141 M00S01039.config +++| BX5 X5-X5
01142 M00S01040.config +++| SB4 10
01143 M00S01041.config +++| SA1 SPTR SET STRING POINTER
01144 M00S01042.config +++| SB2 X1
01145 M00S01043.config +++| SA1 SLMP SET MAXIMUM CHARACTER SCAN
01146 M00S01044.config +++| SB3 X1
01147 M00S01045.config +++|
01148 M00S01046.config +++|* ASSEMBLE CHARACTERS FROM BUFFER.
01149 M00S01047.config +++|
01150 M00S01048.config +++| ASC1 SB2 B2+B1
01151 M00S01049.config +++| GE B2,B3,ASC3 IF END OF STRING BUFFER
01152 M00S01050.config +++| SA1 B2
01153 M00S01051.config +++| SB5 X1 SET SEPARATOR
01154 M00S01052.config +++| SB7 X1-1R
01155 M00S01053.config +++| ZR B7,ASC1 IF BLANK
01156 M00S01054.config +++| SB7 X1-1R+
01157 M00S01055.config +++| PL B7,ASC4 IF SEPARATOR
01158 M00S01056.config +++| SA4 ASCA
01159 M00S01057.config +++| ZR X4,ASC2 IF NOT TO IGNORE ZEROES
01160 M00S01058.config +++| SB7 X1-1R0
01161 M00S01059.config +++| ZR B7,ASC1 IF LEADING ZERO
01162 M00S01060.config +++| SX7 B0 CLEAR IGNORE ZEROES FLAG
01163 M00S01061.config +++| SA7 A4
01164 M00S01062.config +++| ASC2 LX5 6 ASSEMBLE CHARACTER
01165 M00S01063.config +++| SB4 B4-1 DECREMENT COUNT
01166 M00S01064.config +++| BX5 X5+X1
01167 M00S01065.config +++| NZ B4,ASC1 IF MORE CHARACTERS TO ASSEMBLE
01168 M00S01066.config +++| EQ ASC4 SET ASSEMBLED CHARACTERS
01169 M00S01067.config +++|
| Line S00044 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01170 M01S00044.241l630 +++|
01171 M00S01068.config +++| ASCA CON 0 IGNORE LEADING ZEROES FLAG
01172 M00S01069.config +++| BCL SPACE 4,20
01173 M00S01070.config +++|** BCL - BUILD CURRENT CONFIGURATION LIST.
01174 M00S01071.config +++|*
01175 M00S01072.config +++|* EXIT CURRENT MASS STORAGE CONFIGURATION ON OUTPUT.
01176 M00S01073.config +++|*
01177 M00S01074.config +++|* USES A - 1, 2.
01178 M00S01075.config +++|* X - 1, 2, 5, 6.
01179 M00S01076.config +++|*
| Line S01077 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01180 M01S01077.ns22000 ---|* CALLS BED, RMT.
| Line S00022 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01181 M01S00022.ns22000 +++|* CALLS BED, EST, RMT.
01182 M00S01078.config +++|*
01183 M00S01079.config +++|* MACROS CLOCK, DATE, GETLCW, WRITEC, WRITER.
01184 M00S01080.config +++|
01185 M00S01081.config +++|
01186 M00S01082.config +++| BCL2 WRITER O,R FLUSH BUFFER
01187 M00S01083.config +++|
01188 M00S01084.config +++| BCL SUBR ENTRY/EXIT
| Line S01085 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01189 M01S01085.ns22000 ---| SA2 ESTA READ EST
01190 M01S01086.ns22000 ---| GETLCW NMSD,X2,ESTB
| Line S00023 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01191 M01S00023.ns22000 +++| RJ EST READ EST INTO *ESTB*
01192 M00S01087.config +++| DATE BCLA+3 PUT DATE AND TIME IN HEADER
01193 M00S01088.config +++| CLOCK BCLA+4
01194 M00S01089.config +++| WRITEC O,BCLA WRITE HEADER
01195 M00S01090.config +++| WRITEC X2,BCLB WRITE DESCRIPTION LINE
01196 M00S01091.config +++| WRITEC X2,(=C* *) WRITE BLANK LINE
01197 M00S01092.config +++|
01198 M00S01093.config +++|* SEARCH FOR MASS STORAGE EQUIPMENTS.
01199 M00S01094.config +++|
| Line S01095 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01200 M01S01095.ns22000 ---| SX5 B0
01201 M01S01096.ns22000 ---| BCL1 SX5 X5+B1 NEXT EQUIPMENT
01202 M01S01097.ns22000 ---| SX6 X5-NMSD
01203 M01S01098.ns22000 ---| ZR X6,BCL2 IF END OF MASS STORAGE EQUIPMENTS
01204 M01S01099.ns22000 ---| SA1 ESTB+X5
| Line S00024 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01205 M01S00024.ns22000 +++| SX5 NOPE-1 INITIALIZE EST ORDINAL FOR SEARCH
01206 M01S00025.ns22000 +++| BCL1 SX5 X5+B1 INCREMENT EST ORDINAL
01207 M01S00026.ns22000 +++| SA1 LMSO
01208 M01S00027.ns22000 +++| IX1 X1-X5
01209 M01S00028.ns22000 +++| ZR X1,BCL2 IF END OF MASS STORAGE DEVICES
01210 M01S00029.ns22000 +++| R= X1,ESTE
01211 M01S00030.ns22000 +++| IX1 X5*X1
01212 M01S00031.ns22000 +++| SA1 ESTB+X1+EQDE READ EST ENTRY
01213 M00S01100.config +++| PL X1,BCL1 IF NOT MASS STORAGE
01214 M00S01101.config +++| RJ RMT READ MST
01215 M00S01102.config +++| RJ BED BUILD EQUIPMENT DISPLAY LINE
01216 M00S01103.config +++| WRITEC O,BEDB,BEDBL WRITE DISPLAY LINE TO BUFFER
01217 M00S01104.config +++| EQ BCL1 DISPLAY NEXT MS EQUIPMENT
01218 M00S01105.config +++|
| Line S00045 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01219 M01S00045.241l630 +++|
01220 M00S01106.config +++| BCLA DATA C*1 MASS STORAGE CONFIGURATION. 00/00/00. 00.00.00.*
01221 M00S01107.config +++| BCLB DATA C*0 ORD TYPE CHANNELS UNITS*
01222 M00S01108.config +++| BED SPACE 4,10
01223 M00S01109.config +++|** BED - BUILD EQUIPMENT DISPLAY LINE.
01224 M00S01110.config +++|*
01225 M00S01111.config +++|* ENTRY (X5) = EST ORDINAL.
01226 M00S01112.config +++|* (MSTB) = MST FOR EQUIPMENT.
01227 M00S01113.config +++|*
01228 M00S01114.config +++|* EXIT (BEDC) = DISPLAY LINE FOR EQUIPMENT.
01229 M00S01115.config +++|* (BEDB) = DISPLAY LINE PRECEDED BY BLANK WORD.
01230 M00S01116.config +++|*
01231 M00S01117.config +++|* USES A - 0, 1, 2, 3, 6.
01232 M00S01118.config +++|* X - 0, 1, 2, 3, 6.
01233 M00S01119.config +++|* B - 4, 5, 6, 7.
01234 M00S01120.config +++|*
| Line S01121 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01235 M01S01121.ns22000 ---|* CALLS S2L.
| Line S00032 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01236 M01S00032.ns22000 +++|* CALLS COD, S2L.
01237 M00S01122.config +++|*
01238 M00S01123.config +++|* MACROS MOVE.
01239 M00S01124.config +++|
01240 M00S01125.config +++|
01241 M00S01126.config +++| BED SUBR ENTRY/EXIT
| Line S01127 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01242 M01S01127.241l630 ---| MOVE KLNL-1,BEDA,BEDC
| Line S00046 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01243 M01S00046.241l630 +++| MOVE BEDAL,BEDA,BEDC
| Line S01128 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01244 M01S01128.ns22000 ---| SX1 X5 CONVERT EQUIPMENT NUMBER
| Line S00033 Modification History |
M01 (Added by) | ns22000 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01245 M02S00033.241l630 ---| SX1 X5 CONVERT EST ORDINAL
| Line S00047 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01246 M01S00047.241l630 +++| SX1 X5+ CONVERT EST ORDINAL
01247 M00S01129.config +++| NZ X5,BED1 IF NOT REDEFINITION EQUIPMENT
01248 M00S01130.config +++| SA1 B1RM+CUEQ
01249 M00S01131.config +++| BED1 SA0 BEDC DISPLAY WORD ADDRESS
| Line S01132 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01250 M01S01132.ns22000 ---| SB7 48 WORD POSITION
01251 M01S01133.ns22000 ---| RJ S2L SET TWO DIGITS IN LINE
01252 M01S01134.ns22000 ---| SA2 ESTB+X5 MERGE EQUIPMENT TYPE
| Line S00034 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01253 M01S00034.ns22000 +++| SX1 X1+1000B ENSURE THREE DIGITS
01254 M01S00035.ns22000 +++| RJ COD CONVERT EST ORDINAL
01255 M01S00036.ns22000 +++| MX1 -18
01256 M01S00037.ns22000 +++| BX6 -X1*X6
01257 M01S00038.ns22000 +++| SA2 A0
01258 M01S00039.ns22000 +++| LX1 42 POSITION MASK
01259 M01S00040.ns22000 +++| LX6 42
01260 M01S00041.ns22000 +++| BX2 X1*X2
01261 M01S00042.ns22000 +++| BX3 X2+X6 MERGE EST ORDINAL INTO LINE
01262 M01S00043.ns22000 +++| R= X2,ESTE
01263 M01S00044.ns22000 +++| IX2 X5*X2
01264 M01S00045.ns22000 +++| SA2 ESTB+X2+EQDE MERGE EQUIPMENT TYPE
01265 M00S01135.config +++| LX2 -12
01266 M00S01136.config +++| MX0 -11
01267 M00S01137.config +++| BX1 -X0*X2
| Line S01138 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01268 M01S01138.ns22000 ---| SA3 A0 READ DISPLAY WORD
01269 M00S01139.config +++| LX0 24
01270 M00S01140.config +++| BX3 X0*X3
01271 M00S01141.config +++| LX1 24
01272 M00S01142.config +++| BX6 X1+X3
01273 M00S01143.config +++| SA6 A0
01274 M00S01144.config +++| SA3 MSTB+DDLL MERGE UNIT COUNT
| Line S01145 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01275 M01S01145.ns22000 ---| MX0 -6
| Line S00046 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01276 M01S00046.ns22000 +++| MX0 -3
01277 M00S01146.config +++| LX3 -48
01278 M00S01147.config +++| BX1 -X0*X3
01279 M00S01148.config +++| LX3 59-58+48
01280 M00S01149.config +++| NG X3,BED2 IF NULL EQUIPMENT
01281 M00S01150.config +++| SX1 X1+B1
01282 M00S01151.config +++| BED2 SX6 X1+2R-0
01283 M00S01152.config +++| MX0 -12
01284 M00S01153.config +++| SB5 X1 SAVE UNIT COUNT FOR UNIT LIST PROCESSING
01285 M00S01154.config +++| LX0 12
01286 M00S01155.config +++| LX6 12
01287 M00S01156.config +++| SA3 A0
01288 M00S01157.config +++| BX3 X0*X3
01289 M00S01158.config +++| BX6 X6+X3
01290 M00S01159.config +++| SA6 A0
01291 M00S01160.config +++| SA0 A0+B1 NEXT DISPLAY WORD
| Line S01161 Modification History |
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01292 M01S01161.252l678 ---| MX0 -5 MERGE CHANNELS IN DISPLAY LINE
01293 M01S01162.252l678 ---| LX2 -24
| Line S00004 Modification History |
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01294 M01S00004.252l678 +++| MX0 -6 MERGE CHANNELS IN DISPLAY LINE
| Line S00005 Modification History |
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01295 M02S00005.ns2550 ---| LX2 -12
| Line S00009 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01296 M01S00009.ns2550 +++| LX2 -24
01297 M00S01163.config +++| BX1 -X0*X2
01298 M00S01164.config +++| SB7 36
01299 M00S01165.config +++| RJ S2L
| Line S01166 Modification History |
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01300 M01S01166.ns22000 ---| SA1 ESTB+X5 CONVERT SECOND CHANNEL
| Line S00047 Modification History |
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act
----------------------------+
01301 M01S00047.ns22000 +++| R= X1,ESTE
01302 M01S00048.ns22000 +++| IX1 X5*X1
01303 M01S00049.ns22000 +++| SA1 ESTB+X1+EQDE CONVERT SECOND CHANNEL
| Line S01167 Modification History |
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01304 M01S01167.252l678 ---| LX1 -42
01305 M01S01168.252l678 ---| MX0 -5
| Line S00006 Modification History |
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01306 M02S00006.ns2550 ---| LX1 -36
| Line S00010 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01307 M01S00010.ns2550 +++| LX1 -24
| Line S00007 Modification History |
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01308 M01S00007.252l678 +++| MX0 -6
01309 M00S01169.config +++| BX1 -X0*X1
01310 M00S01170.config +++| ZR X1,BED3 IF NO SECOND CHANNEL
01311 M00S01171.config +++| SB7 18
01312 M00S01172.config +++| RJ S2L SET SECOND CHANNEL IN DISPLAY WORD
01313 M00S01173.config +++| SA1 A0 INSERT COMMA
01314 M00S01174.config +++| SX6 1R,-1R
01315 M00S01175.config +++| LX6 30
01316 M00S01176.config +++| IX6 X1+X6
01317 M00S01177.config +++| SA6 A0
01318 M00S01178.config +++| BED3 SA0 A0+B1 NEXT DISPLAY WORD
01319 M00S01179.config +++| SB7 36 INITIALIZE UNIT POSITION IN DISPLAY WORD
01320 M00S01180.config +++| SB6 B0 LOGICAL UNIT NUMBER
01321 M00S01181.config +++| BED4 GE B6,B5,BED5 IF END OF UNITS
01322 M00S01182.config +++| SA1 MSTB+DDLL
01323 M00S01183.config +++| SB4 B6+B6 COMPUTE SHIFT COUNT
01324 M00S01184.config +++| SB4 B4+B6
01325 M00S01185.config +++| SB4 B4+B4
01326 M00S01186.config +++| AX1 B4
01327 M00S01187.config +++| MX0 -6
01328 M00S01188.config +++| BX1 -X0*X1
01329 M00S01189.config +++| RJ S2L SET UNIT NUMBER IN DISPLAY LINE
01330 M00S01190.config +++| SB6 B6+B1 INCREMENT UNIT COUNT
01331 M00S01191.config +++| SB7 B7-18
01332 M00S01192.config +++| PL B7,BED4 IF NOT NEW DISPLAY WORD
01333 M00S01193.config +++| SB7 B7+60
01334 M00S01194.config +++| SA0 A0+B1
01335 M00S01195.config +++| EQ BED4 NEXT UNIT
01336 M00S01196.config +++|
01337 M00S01197.config +++| BED5 SA1 MSTB+ACGL SET STATUSES IN DISPLAY LINE
01338 M00S01198.config +++| BX6 X6-X6
01339 M00S01199.config +++| LX1 59-11
01340 M00S01200.config +++| PL X1,BED6 IF NOT DEVICE IDLE
01341 M00S01201.config +++| SX6 1RI&1R-
| Line S01202 Modification History |
M01 (Removed by) | 242l642 |
Seq # *Modification Id* Act
----------------------------+
01342 M01S01202.242l642 ---| BED6 SA1 MSTB+DDLL
| Line S00001 Modification History |
M01 (Added by) | 242l642 |
Seq # *Modification Id* Act
----------------------------+
01343 M01S00001.242l642 +++| BED6 SA1 MSTB+DALL
01344 M01S00002.242l642 +++| AX1 56
01345 M00S01203.config +++| LX6 6
| Line S01204 Modification History |
M01 (Removed by) | 242l642 |
Seq # *Modification Id* Act
----------------------------+
01346 M01S01204.242l642 ---| PL X1,BED7 IF NOT SUSPEND STATUS
| Line S00003 Modification History |
M01 (Added by) | 242l642 |
Seq # *Modification Id* Act
----------------------------+
01347 M01S00003.242l642 +++| SX2 3
01348 M01S00004.242l642 +++| BX1 X2-X1
01349 M01S00005.242l642 +++| NZ X1,BED7 IF NOT DOWN
01350 M00S01205.config +++| SX6 X6+1RS&1R-
01351 M00S01206.config +++| BED7 LX6 12
01352 M00S01207.config +++|
01353 M00S01208.config +++|* MERGE STATUS BITS IN DISPLAY LINE.
01354 M00S01209.config +++|
01355 M00S01210.config +++| SA1 BEDC+5
01356 M00S01211.config +++| LX6 18
01357 M00S01212.config +++| BX6 X1-X6
01358 M00S01213.config +++| SA6 A1
01359 M00S01214.config +++| EQ BEDX RETURN
01360 M00S01215.config +++|
| Line S01216 Modification History |
M01 (Removed by) | confi3 |
Seq # *Modification Id* Act
----------------------------+
01361 M01S01216.confi3 ---| BEDA DATA 64H 1. DQ CH00 UL=-- -- -- -- -- -- -- -- ST =
| Line S00002 Modification History |
M01 (Added by) | confi3 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01362 M02S00002.241l630 ---| BEDA DATA 64L 1. DQ CH00 UL=-- -- -- -- -- -- -- -- ST =
| Line S01217 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01363 M01S01217.241l630 ---|, ----
| Line S00048 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01364 M01S00048.241l630 +++|
01365 M01S00049.241l630 +++| BEDA DATA L* 1. DQ CH00 UL=-- -- -- -- -- -- -- -- ST =
01366 M01S00050.241l630 +++|,----*
01367 M01S00051.241l630 +++| BEDAL EQU *-BEDA
01368 M01S00052.241l630 +++| ERRNZ BEDAL+1-KLNL LINE LENGTH ERROR
01369 M00S01218.config +++| BEDB DATA 10H BLANK SPACING FOR OUTPUT
| Line S01219 Modification History |
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01370 M01S01219.241l630 ---| BEDC BSS KLNL-1 DISPLAY LINE BUFFER
01371 M01S01220.241l630 ---| CON 0 END OF LINE FOR OUTPUT
| Line S00053 Modification History |
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act
----------------------------+
01372 M01S00053.241l630 +++| BEDC BSS BEDAL DISPLAY LINE BUFFER
01373 M00S01221.config +++| BEDBL EQU *-BEDB LENGTH OF OUTPUT LINE
01374 M00S01222.config +++| CAE SPACE 4,10
01375 M00S01223.config +++|** CAE - CLEAR ALL EQUIPMENT IDLE STATUS.
01376 M00S01224.config +++|*
01377 M00S01225.config +++|* EXIT (X5) = ERROR MESSAGE ADDRESS.
01378 M00S01226.config +++|* = 0 IF NO EQUIPMENT FOUND.
01379 M00S01227.config +++|*
01380 M00S01228.config +++|* CALLS CLP, RRC.
01381 M00S01229.config +++|
01382 M00S01230.config +++|
01383 M00S01231.config +++| CAE SUBR ENTRY/EXIT
01384 M00S01232.config +++| CAE1 RJ RRC
01385 M00S01233.config +++| ZR X5,CAEX IF NO EQUIPMENT FOUND
01386 M00S01234.config +++| RJ CLP
01387 M00S01235.config +++| NZ X5,CAEX IF ERROR IN CLEAR REQUEST
01388 M00S01236.config +++| EQ CAE1 CHECK FOR NEXT EQUIPMENT
01389 M00S01237.config +++| CCH SPACE 4,10
01390 M00S01238.config +++|** CCH - CHECK FOR MATCHING CHANNELS.
01391 M00S01239.config +++|*
01392 M00S01240.config +++|* ENTRY (X1) = EST TO CHECK.
| Line S01241 Modification History |
M01 (Removed by) | confi1 |
Seq # *Modification Id* Act
----------------------------+
01393 M01S01241.confi1 ---|* (CUEQ) = CURRENT EQUIPMENT.
| Line S00001 Modification History |
M01 (Added by) | confi1 |
Seq # *Modification Id* Act
----------------------------+
01394 M01S00001.confi1 +++|* (ESTD) = NEW EST ENTRY.
01395 M00S01242.config +++|*
01396 M00S01243.config +++|* EXIT (X1) = 0 IF NO CHANNEL MATCH.
01397 M00S01244.config +++|*
01398 M00S01245.config +++|* USES A - 2, 4.
01399 M00S01246.config +++|* X - 0, 1, 2, 3, 4.
01400 M00S01247.config +++|* B - 2.
01401 M00S01248.config +++|
01402 M00S01249.config +++|
01403 M00S01250.config +++| CCH SUBR ENTRY/EXIT
| Line S01251 Modification History |
M01 (Removed by) | confi1 |
Seq # *Modification Id* Act
----------------------------+
01404 M01S01251.confi1 ---| SA2 B1RM+CUEQ CURRENT EQUIPMENT
01405 M01S01252.confi1 ---| SA4 ESTB+X2
| Line S00002 Modification History |
M01 (Added by) | confi1 |
Seq # *Modification Id* Act
----------------------------+
01406 M01S00002.confi1 +++| SA4 B1RM+ESTD
| Line S01253 Modification History |
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01407 M01S01253.252l678 ---| LX1 -36
01408 M01S01254.252l678 ---| LX4 -36
01409 M01S01255.252l678 ---| MX0 -5
| Line S00008 Modification History |
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01410 M01S00008.252l678 +++| LX1 -24
| Line S00009 Modification History |
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01411 M02S00009.ns2550 ---| LX4 -25
| Line S00011 Modification History |
M01 (Added by) | ns2550 |
M02 (Removed by) | confi1a |
Seq # *Modification Id* Act
----------------------------+
01412 M02S00011.confi1a ---| LX4 36
| Line S00003 Modification History |
M01 (Added by) | confi1a |
Seq # *Modification Id* Act
----------------------------+
01413 M01S00003.confi1a +++| LX4 24
| Line S00010 Modification History |
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01414 M01S00010.252l678 +++| MX0 -6
| Line S01256 Modification History |
M01 (Removed by) | confi1 |
Seq # *Modification Id* Act
----------------------------+
01415 M01S01256.confi1 ---| BX2 -X0*X1 BUILD CHANNEL MASK FOR CURRENT EQUIPMENT
| Line S00003 Modification History |
M01 (Added by) | confi1 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01416 M02S00003.ns2550 ---| BX2 -X0*X1 BUILD CHANNEL MASK FOR NEW EQUIPMENT
| Line S00012 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01417 M01S00012.ns2550 +++| BX3 -X0*X1 BUILD CHANNEL MASK FOR NEW EQUIPMENT
| Line S01257 Modification History |
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01418 M01S01257.252l678 ---| LX1 -6
| Line S00011 Modification History |
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01419 M01S00011.252l678 +++| LX1 -12
| Line S01258 Modification History |
M01 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01420 M01S01258.ns2550 ---| BX3 -X0*X1
| Line S00013 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01421 M01S00013.ns2550 +++| BX2 -X0*X1
01422 M00S01259.config +++| SX1 B1
01423 M00S01260.config +++| SB2 X2
01424 M00S01261.config +++| LX2 X1,B2
01425 M00S01262.config +++| SB2 X3
01426 M00S01263.config +++| ZR X3,CCH1 IF NO SECOND CHANNEL
01427 M00S01264.config +++| LX3 X1,B2
01428 M00S01265.config +++| BX2 X2+X3
01429 M00S01266.config +++| CCH1 BX3 -X0*X4 BUILD CHANNEL MASK FOR COMPARE EQUIPMENT
01430 M00S01267.config +++| SB2 X3
| Line S01268 Modification History |
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act
----------------------------+
01431 M01S01268.252l678 ---| LX4 -6
| Line S00012 Modification History |
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01432 M02S00012.ns2550 ---| LX4 -12
| Line S00014 Modification History |
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act
----------------------------+
01433 M01S00014.ns2550 +++| LX4 12
01434 M00S01269.config +++| LX3 X1,B2
01435 M00S01270.config +++| BX4 -X0*X4
01436 M00S01271.config +++| SB2 X4
01437 M00S01272.config +++| ZR X4,CCH2 IF NO SECOND CHANNEL
01438 M00S01273.config +++| LX4 X1,B2
01439 M00S01274.config +++| BX3 X3+X4
01440 M00S01275.config +++| CCH2 BX1 X2*X3 NON-ZERO IF ANY CHANNEL MATCHES
01441 M00S01276.config +++| EQ CCHX RETURN
01442 M00S01277.config +++| CHA SPACE 4,10
01443 M00S01278.config +++|** CHA - CHECK CHANNEL AVAILABLE.
01444 M00S01279.config +++|*
01445 M00S01280.config +++|* ENTRY (X2) = CHANNEL NUMBER.
01446 M00S01281.config +++|* (NPPU) = NUMBER OF PP-S.
01447 M00S01282.config +++|*
01448 M00S01283.config +++|* EXIT (X5) = 0 IF CHANNEL AVAILABLE.
01449 M00S01284.config +++|* = ERROR MESSAGE ADDRESS IF ERROR.
| Line S00015 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
01450 M01S00015.confi4 +++|* (X1) .LT. 0 IF CHANNEL AVAILABLE ((X5) = 0)) BUT DOWN.
| Line S00001 Modification History |
M01 (Added by) | confi5 |
Seq # *Modification Id* Act
----------------------------+
01451 M01S00001.confi5 +++|* (X6) = RESTORED TO ENTRY VALUE.
01452 M00S01285.config +++|*
| Line S01286 Modification History |
M01 (Removed by) | confi5 |
Seq # *Modification Id* Act
----------------------------+
01453 M01S01286.confi5 ---|* USES A - 1, 5, 7.
01454 M01S01287.confi5 ---|* X - 1, 3, 4, 5, 7.
| Line S00002 Modification History |
M01 (Added by) | confi5 |
Seq # *Modification Id* Act
----------------------------+
01455 M01S00002.confi5 +++|* USES A - 1, 5, 6, 7.
01456 M01S00003.confi5 +++|* X - 1, 3, 4, 5, 6, 7.
01457 M00S01288.config +++|* B - 2, 3.
01458 M00S01289.config +++|*
01459 M00S01290.config +++|* MACROS GETLCW.
01460 M00S01291.config +++|
01461 M00S01292.config +++|
01462 M00S01293.config +++| CHA4 SX5 ERCN **** ERROR IN CHANNEL NUMBER.
01463 M00S01294.config +++|
01464 M00S01295.config +++| CHA SUBR ENTRY/EXIT
01465 M00S01296.config +++| SX7 13B SET UPPER CHANNEL OF LOWER BANK
01466 M00S01297.config +++| IX1 X7-X2
01467 M00S01298.config +++| BX5 X5-X5 SET CHANNEL AVAILABLE
| Line S01299 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
01468 M01S01299.confi4 ---| PL X1,CHAX IF CHANNEL IN LOWER BANK
| Line S00016 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
01469 M01S00016.confi4 +++| PL X1,CHA0 IF CHANNEL IN LOWER BANK
01470 M00S01300.config +++| SA1 NPPU NUMBER OF PP-S
01471 M00S01301.config +++| SX5 X1-11
01472 M00S01302.config +++| NG X5,CHA4 IF ONLY CHANNELS 0 - 13
01473 M00S01303.config +++| SX3 20B LOWER CHANNEL IN UPPER BANK
01474 M00S01304.config +++| SX4 33B UPPER CHANNEL IN UPPER BANK
01475 M00S01305.config +++| IX5 X2-X3
01476 M00S01306.config +++| NG X5,CHA4 IF NOT IN UPPER BANK
01477 M00S01307.config +++| IX5 X4-X2 CHECK UPPER LIMIT
01478 M00S01308.config +++| NG X5,CHA4 IF ERROR
| Line S01309 Modification History |
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
01479 M01S01309.confi4 ---| BX7 X2 SAVE CHANNEL NUMBER
| Line S00017 Modification History |
M01 (Added by) | confi4 |
Seq # *Modification Id* Act
----------------------------+
01480 M01S00017.confi4 +++| CHA0 BX7 X2 SAVE CHANNEL NUMBER
01481 M00S01310.config +++| SA7 CHAA
| Line S00004 Modification History |
M01 (Added by) | confi5 |
Seq # *Modification Id* Act
----------------------------+
01482 M01S00004.confi5 +++| BX7 X6 PRESERVE X6
01483 M00S01311.config +++| GETLCW 1,CHTP,CHTB
01484 M00S01312.config +++| BX2 X1 FWA OF CHANNEL STATUS TABLE
| Line S01313 Modification History |
M01 (Removed by) | confi2 |
Seq # *Modification Id* Act
----------------------------+
01485 M01S01313.confi2 ---| LX2 0-11
| Line S00001 Modification History |
M01 (Added by) | confi2 |
Seq # *Modification Id* Act
----------------------------+
01486 M01S00001.confi2 +++| LX2 0-12 POSITION CHANNEL STATUS TABLE ADDRESS
| Line S00001 Modification History |
M01 (Added by) | confi2a |
Seq # *Modification Id* Act
----------------------------+
01487 M01S00001.confi2a +++| SX2 X2
01488 M00S01314.config +++| GETLCW CTALL,X2,CHTB
| Line S00005 Modification History |
M01 (Added by) | confi5 |
Seq # *Modification Id* Act
----------------------------+
01489 M01S00005.confi5 +++| BX6 X7 RESTORE X6
01490 M00S01315.config +++| SA5 CHAA DETERMINE CHANNEL TABLE WORD INDEX
01491 M00S01316.config +++| SB2 B0
01492 M00S01317.config +++| CHA1 SX5 X5-5 DIVIDE BY 5 LOOP
01493 M00S01318.config +++| NG X5,CHA2 IF DIVIDE COMPLETE
01494 M00S01319.config +++| SB2 B2+B1
01495 M00S01320.config +++| EQ CHA1 CONTINUE DIVIDE
01496 M00S01321.config +++|
01497 M00S01322.config +++| CHA2 SA1 CHTB+B2
01498 M00S01323.config +++| SB3 X5+6
01499 M00S01324.config +++| CHA3 LX1 12 POSITION CHANNEL BYTE