cdc:nos2.source:opl871:eqpinst
Table of Contents
EQPINST
Table Of Contents
Source Code
- EQPINST.txt
*NOSEQ EQPINST INSTRUCTIONS FOR EQUIPMENT DEFINITION. USE + KEY TO SEE NEXT PAGE. NEXT. WILL CAUSE THE LOAD TO CONTINUE. IPR. WILL CONTINUE THE LOAD TO THE *IPRDECK* DISPLAY. GO. WILL CONTINUE THE LOAD WITHOUT FURTHER DISPLAYS. THE RIGHT BLANK KEY ADVANCES THE DISPLAY. LBC,CT,C1,C2,...,CN. SELECTS CONTROLWARE RECORD TYPE *CT* TO BE LOADED ON CHANNELS C1,C2,...,CN. CT = CONTROLWARE TYPE TO LOAD. NC = NULL CONTROLWARE (CLEAR A PREVIOUS ENTRY) HT = LOAD HALF TRACK CONTROLWARE. NH = DO NOT LOAD HALF TRACK CONTROLWARE. FT = LOAD FULL TRACK CONTROLWARE. NF = DO NOT LOAD FULL TRACK CONTROLWARE. FM = LOAD FMD CONTROLWARE. NM = DO NOT LOAD FMD CONTROLWARE. AD = LOAD FSC ADAPTOR CONTROLWARE. NA = DO NOT LOAD FSC ADAPTOR CONTROLWARE. PH = LOAD HSIO CONTROLWARE. NP = DO NOT LOAD HSIO CONTROLWARE. ID = LOAD 7255 ADAPTOR CONTROLWARE. NI = DO NOT LOAD 7255 ADAPTOR CONTROLWARE. CC = LOAD 7165 CONTROLWARE. CN = DO NOT LOAD 7165 CONTROLWARE. NN = DO NOT LOAD NAD CONTROLWARE. M8 = LOAD 7990 CONTROLWARE. N8 = DO NOT LOAD 7990 CONTROLWARE. NX = DO NOT LOAD CCC/NIP CONTROLWARE. NT = DO NOT LOAD CCC/698 CONTROLWARE. SD = SUPPRESS DEFAULT CONTROLWARE. CN = CHANNELS TO LOAD. A CONCURRENT CHANNEL IS INDICATED BY A *C* PREFIX ON THE CHANNEL NUMBER. FOR EXAMPLE, *LBC,SD,6,C3.* WOULD SUPPRESS LOADING OF DEFAULT CONTROLWARE ON NORMAL CHANNEL 6 AND CONCURRENT CHANNEL 3. RESET=X1,X2,...,XN. RESET CHARACTERISTICS FOR EQUIPMENTS WITH EST ORDINALS X1,X2,...,XN. ONLY THE EQUIPMENT INFORMATION ENTERED VIA THE *EQXXX=* COMMAND WILL BE RETAINED. XM=MID,IIII,UUUU,EM. ALLOCATE EXTENDED MEMORY. MID = MACHINE ID. IIII = HIGH SPEED DISK BUFFER SPACE/1000B. UUUU = USER EXTENDED MEMORY SPACE/1000B. EM = FORCES USER EXTENDED MEMORY TO UEM IF SPECIFIED (8XX SERIES MAINFRAMES ONLY). XM=MID. CLEAR ALLOCATION FOR MACHINE *MID*. 1THE FOLLOWING ENTRIES DEFINE DAYFILE RESIDENCE AND CM BUFFER SIZE. IF EQUIPMENT IS DELETED (EQXXX=0.), RESET OR REDEFINED, THE DAYFILE RESIDENCE IS RESET TO THE DEFAULT (FIRST SYSTEM DEVICE). ACCOUNT=XXX,BL. ACCOUNT DAYFILE. DAYFILE=XXX,BL. SYSTEM DAYFILE. ERRLOG=XXX,BL. ERRLOG DAYFILE. MAINLOG=XXX,BL. MAINTENANCE LOG. XXX = EST ORDINAL (DEVICE CANNOT BE REMOVABLE). BL = CM BUFFER LENGTH (MUST BE A MULTIPLE OF 100B). THE FOLLOWING ENTRIES MUST BE MADE AFTER THE EQUIPMENT HAS BEEN DEFINED. IF EQUIPMENT IS DELETED (EQXXX=0.), RESET OR REDEFINED, THEN THESE DEFINITIONS ARE CLEARED AND MUST BE REENTERED AFTER NEW EQUIPMENT IS DEFINED, EXCEPT FOR *DOWN,CH* AND *UP,CH*. X1,X2,...,XN = EST ORDINALS OF EQUIPMENT. ACCESS,LLVL,ULVL,X1,X2,...,XN. SET SECURITY ACCESS LEVEL LIMITS ON X1,X2,...,XN. LLVL = ACCESS LEVEL NAME FOR THE LOWER LIMIT. ULVL = ACCESS LEVEL NAME FOR THE UPPER LIMIT. ASR=X1,X2,...,XN. DEFINE X1,X2,...,XN AS ALTERNATE SYSTEM DEVICES. NONE OF THE EST ORDINALS MAY BE DEFINED AS SYSTEM CHECKPOINT (SCKP) DEVICES. DOWN,CH=C1,C2,...CN. DOWN CHANNEL(S) ON ALL EQUIPMENTS CONNECTED TO THEM. A CONCURRENT CHANNEL IS INDICATED BY A *C* PREFIX ON THE CHANNEL NUMBER. FOR EXAMPLE, *DOWN,CH=6,C3.* WOULD DOWN NORMAL CHANNEL 6 AND CONCURRENT CHANNEL 3. NEITHER THE DEADSTART CHANNEL NOR THE *CIP* CHANNEL CAN BE DOWNED. A CHANNEL PROVIDING THE ONLY ACCESS TO AN EQUIPMENT CANNOT BE DOWNED UNLESS THE EQUIPMENT IS ALSO DOWN. FAMILY=XXX. DEFINE EQUIPMENT WITH EST ORDINAL *XXX* AS THE DEFAULT FAMILY. INITIALIZE,OP,X1,X2,...,XN. INITIALIZE MASS STORAGE DEVICES X1,X2,...,XN. OP = INITIALIZATION OPTION. AL = TOTAL INITIALIZE. AF = INITIALIZE ACCOUNT DAYFILE. DF = INITIALIZE SYSTEM DAYFILE. EF = INITIALIZE ERRLOG DAYFILE. FP = FORMAT PACK (AUTOMATIC SELECTION OF *AL*). MF = INITIALIZE MAINTENANCE LOG. PF = INITIALIZE PERMANENT FILES. QF = INITIALIZE QUEUED FILES. ISHARE=X1,X2,...,XN. DEFINE X1,X2,...,XN AS INDEPENDENT SHARED DEVICES. MAXSHARE=N,B. DEFINES THE MAXIMUM NUMBER OF SHARED DEVICES IN A MMF COMPLEX. N = PARAMETER SPECIFYING THE MAXIMUM NUMBER OF SHARED DEVICES (N .LT. 377B). B = OPTIONAL PARAMETER SPECIFYING THE MAXIMUM NUMBER OF SHARED BUFFERED DEVICES (B .LT. N). MSAL,TY,X1,X2,...,XN. ALLOW ALLOCATION TYPE *TY* ON X1,X2,...,XN. (XN MUST BE .LT. 60B). TY = B FOR *LGO* FILES. D FOR USER DAYFILES. I FOR INPUT FILES. L FOR LOCAL FILES. O FOR OUTPUT FILES. P FOR PRIMARY FILES. R FOR ROLLOUT FILES. S FOR SECONDARY ROLLOUT FILES. T FOR TEMPORARY FILES. PF=XXX,F,DM,SM,FM,DN,NC. DEFINE EQUIPMENT WITH EST ORDINAL *XXX* AS A PERMANENT FILE FAMILY DEVICE. PF=XXX,X,PN,NC. DEFINE EQUIPMENT WITH EST ORDINAL *XXX* AS A PERMANENT FILE AUXILIARY DEVICE. APPLIES IF INITIALIZE,AL,XXX. IS USED. DM = DEVICE MASK (0-377B). SM = SECONDARY MASK (0-377B). FM = FAMILY NAME (1-7 ALPHANUMERIC CHARACTERS). PN = PACK NAME (1-7 ALPHANUMERIC CHARACTERS). DN = DEVICE NUMBER (1-77B). NC = CATALOG TRACKS (POWER OF 2 .LE. 200B). REMOVE=X1,X2,...,XN. DEFINE X1,X2,...,XN AS REMOVABLE DEVICES. NONE OF THE EST ORDINALS MAY BE DEFINED AS SYSTEM CHECKPOINT (SCKP) DEVICES. SCKP=X1,X2,...,XN. DEFINE X1,X2,...,XN AS SYSTEM CHECKPOINT DEVICES. NONE OF THE EST ORDINALS MAY BE DEFINED AS REMOVABLE, ASR OR OFF. SHARE=X1,X2,...,XN. DEFINE X1,X2,...,XN AS SHARED DEVICES. THIS ENTRY IS NOT ALLOWED FOLLOWING *PRESET*. SYSTEM=X1,X2,...,XN. DEFINE X1,X2,...,XN AS SYSTEM DEVICES. ALL EQUIPMENTS SPECIFIED MUST BE OF THE SAME TYPE. *MXSY* (5) SYSTEM DEVICES MAY BE DEFINED. (XN MUST BE .LT. 40B). THRESHOLD,OP=TTTT,X1,X2,...,XN. SET ERROR THRESHOLD TTTT ON RMS DEVICES X1,X2,...,XN. OP = ERROR TYPE OPTION. VF = VALIDATION FAILURE. RA = RESTRICTED ACCESS. LS = LOW SPACE. RE = RECOVERED ERRORS. UE = UNRECOVERED ERRORS. TTTT = 0-3777B. UEMIN. TOGGLE FULL INITIALIZE STATUS FOR *UEM* EQUIPMENT ON LEVEL 0 DEADSTART. UP,CH=C1,C2,...CN. UP CHANNEL(S) ON ALL EQUIPMENTS CONNECTED TO THEM. A CONCURRENT CHANNEL IS INDICATED BY A *C* PREFIX ON THE CHANNEL NUMBER. FOR EXAMPLE, *UP,CH=6,C3.* WOULD UP NORMAL CHANNEL 6 AND CONCURRENT CHANNEL 3. DEADSTART OPTIONS. AUTOLOAD. DISABLE AUTOLOADING OF BUFFER CONTROLLERS. GRENADE. SELECT GRENADE OPERATION AFTER AUTOLOADING. PRESET. PRESET LINK DEVICE FOR MULTI-MAINFRAME OPERATION. PRESET=X1,X2,...,XN. PRESET INDEPENDENT SHARED DEVICES X1,X2,...,XN. 1EST DEFINITION EQXXX=TY,K1=V1,...,KN=VN. DEFINE EQUIPMENT WITH EST ORDINAL *XXX* AS FOLLOWS. TY = DEVICE TYPE (2 CHARACTERS) MASS STORAGE - DA = 33502 DB = 885-42 DC = 895 DD = 834 DE = EXTENDED MEMORY DF = 887 (4KB SECTOR) DG = 836 DH = 887 (16KB SECTOR) DI = 844-21, HALF TRACK DJ = 844-41/44, HALF TRACK DK = 844-21, FULL TRACK DL = 844-41/44, FULL TRACK DM = 885-11/12, HALF TRACK DN = 9853 DP = DDP/EXTENDED MEMORY DQ = 885-11/12, FULL TRACK DR = CDSS II, FULL TRACK DV = 819, SINGLE DENSITY DW = 819, DOUBLE DENSITY DX = 3330-1 DY = 3330-11 DZ = 3350 EA = 5832 (1X SSD) EB = 5832 (2X SSD) EC = 5833 (1X SABRE) ED = 5833 (1XP SABRE) EE = 5833 (2X SABRE) EF = 5833 (2XP SABRE) EG = 5838 (1X ELITE) EH = 5838 (1XP ELITE) EI-2 = 5838 (2X ELITE) EJ-2 = 5838 (2XP ELITE) EK-3 = 5838 (3XP ELITE) EL-4 = 5838 (4X ELITE) EM-2 = 5833 (3XP SABRE) EN-2 = 5833 (4X SABRE) EO = 47444 (1X 3.5IN) EP = 47444 (1XP 3.5IN) ES-2 = 47444 (2X 3.5IN) EU-2 = 47444 (2XP 3.5IN) EV-3 = 47444 (3XP 3.5IN) EW-4 = 47444 (4X 3.5IN) FOR MASS STORAGE, EQXXX=TY-N INDICATES A PARTITIONED DEVICE CONSISTING OF *N* CONSECUTIVE EST ENTRIES BEGINNING AT EST ORDINAL *XXX*. THE VALUE OF *N* IS SPECIFIC FOR EACH *TY*. INDIVIDUAL PARTITIONS MAY BE DEFINED BY OMITTING THE *-N* AND SPECIFYING THE PARTITION NUMBER. UNIT RECORD - FOR LINE PRINTERS, EQXXX=TY-P SPECIFIES A 580 PFC PRINTER (NOT VALID FOR DEVICE TYPES LX AND LY). CP = 415 CARD PUNCH CR = 405 CARD READER LQ = 512 LINE PRINTER LR = 580-12 LINE PRINTER LS = 580-16 LINE PRINTER LT = 580-20 LINE PRINTER NON-IMPACT PRINTERS. LX = 5870 LY = 5970 OTHER - FOR MAGNETIC TAPES, EQXXX=TY-N SPECIFIES *N* CONSECUTIVE EST ENTRIES BEGINNING AT EST ORDINAL *XXX*. AT = ACS CARTRIDGE TAPE CC = 6683 SATELLITE COUPLER CM = CONTROL MODULE CT = CTS CARTRIDGE TAPE MP = MAP III MT = 7-TRACK MAG TAPE DRIVE NC = NETWORK ACCESS DEVICE ND = CDCNET INTERFACE UNIT NP = 255X (NPU) NT = 9-TRACK MAG TAPE DRIVE OD = OPTICAL DISK RM = TWO PORT MUX RP = RING PORT SS = 7990 MSAS CONTROLLER TT = TIME-SHARING MUX ** = NONSTANDARD EQUIPMENT 1TY REQUIRED KEYWORDS OPTIONAL KEYWORDS AT CH,UN,LS,PA,DR ST,IB CC EQ,CH ST,IB CM EQ,CH CW,IB CP EQ,CH ST,ID,FC,IB CR EQ,CH ST,ID,IB CT CH,UN ST,IB DA UN,CH ST,AP,IB DB UN,CH ST,AP,IB DC UN,CH ST,AP,IB DD UN ST,AP,IB DE SZ ST,MA,ET,AP,MC,IB DF UN,CH* ST,AP,IB DG UN ST,AP,IB DH UN,CH* ST,AP,IB DI UN,CH ST,AP,IB DJ UN,CH ST,AP,IB DK UN,CH ST,AP,IB DL UN,CH ST,AP,IB DM UN,CH ST,AP,IB DN UN,CH* ST,EQ,AP,IB DP SZ,CH ST,MA,ET,AP,MC,IB DQ UN,CH ST,AP,IB DR UN,CH ST,AP,IB DV UN,CH ST,AP,IB DW UN,CH ST,AP,IB DX UN,CH ST,AP,IB DY UN,CH ST,AP,IB DZ UN,CH ST,AP,IB EA UN,EQ,CH* ST,AP,IB EB UN,EQ,CH* ST,AP,IB EC UN,EQ,CH* ST,AP,IB ED UN,EQ,CH* ST,AP,IB EE UN,EQ,CH* ST,AP,IB EF UN,EQ,CH* ST,AP,IB EG UN,EQ,CH* ST,AP,IB EH UN,EQ,CH* ST,AP,IB EI UN,EQ,CH* ST,AP,IB,PN EJ UN,EQ,CH* ST,AP,IB,PN EK UN,EQ,CH* ST,AP,IB,PN EL UN,EQ,CH* ST,AP,IB,PN EM UN,EQ,CH* ST,AP,IB,PN EN UN,EQ,CH* ST,AP,IB,PN EO UN,EQ,CH* ST,AP,IB EP UN,EQ,CH* ST,AP,IB ES UN,EQ,CH* ST,AP,IB,PN EU UN,EQ,CH* ST,AP,IB,PN EV UN,EQ,CH* ST,AP,IB,PN EW UN,EQ,CH* ST,AP,IB,PN LQ EQ,CH ST,ID,FC,TN,PS,IB LR EQ,CH ST,ID,FC,TN,PS,IB LS EQ,CH ST,ID,FC,TN,PS,IB LT EQ,CH ST,ID,FC,TN,PS,IB LX EQ,CH ST,ID,FC,IB LY EQ,CH ST,ID,FC,IB MP CH ST,IB MT EQ,UN,CH,TF ST,IB NC CH ST,IB ND EQ,CH,PI,ND,NT ST,IB NP EQ,CH,PI,ND,SA ST,IB NT EQ,UN,CH,TF ST,IB OD EQ,UN,CH ST,IB RM CH,PT ST,IB RP CH ST,IB SS EQ,UN,CH ST,IB TT EQ,CH ST,PT,IB ** W0 W1 1K1,...,KN ARE THE FOLLOWING KEYWORDS - AP=N. APRDECK NUMBER. N = 0-77B. CH=C1/.../CN. CHANNEL NUMBER(S). CN = 2, 4 OR 6 IF *TY* IS *DV* OR *DW*. = 15B IF *TY* IS *RM*. = 0-11B FOR 887, 9853 OR 583X DISKS. = 0-13B, 20-33B FOR ALL OTHER TYPES. CH=*C1/.../*CN. * = C IF CONCURRENT CHANNEL (DEFAULT FOR 887, 9853 OR 583X DISKS). CH=C1*/C2*. * = PORT DESIGNATION (A OR B) FOR 887, 9853 OR 583X DISKS (DEFAULT = A). CW=XX. CONTROLWARE LOAD OPTION (DEFAULT = CM). XX = CM - INSTALL CONTROL MODULE I CONTROLWARE (USE WITH *DD*). XX = NCM - DO NOT INSTALL CONTROL MODULE I CONTROLWARE. (USE WITH *DD*) XX = C2 - INSTALL CONTROL MODULE II CONTROLWARE (USE WITH *DG*). XX = NC2 - DO NOT INSTALL CONTROL MODULE II CONTROLWARE. (USE WITH *DG*). DR=N. ACS DRIVE INDEX (WITHIN PANEL). N = 0-3. ET=MT/PT/CT. EXTENDED MEMORY TYPE (DEFAULT = E1/D1). MT = MEMORY TYPE. E1 - ECS 1. E2 - ECS 2. LE - LCME. EM - UEM. ES - ESM. SN - STORNET. PT = PATH TYPE (*DP* EQUIPMENT ONLY). D1 - DC135 DDP. (DEFAULT FOR MT = E1 OR E2). D2 - DC145 DDP / ESM LOW SPEED PORT. (DEFAULT FOR MT = ES OR SN). CT = CPU TYPE (*DP* EQUIPMENT ONLY). NC - NO CPU COUPLER. (DEFAULT FOR MT = SN). EQ=N. EQUIPMENT (CONTROLLER) NUMBER. N = 0-7. FC=XX. FORMS CODE. XX = 2 ALPHANUMERIC CHARACTERS (AA-99). IB=N. INSTALLATION BYTE. N = 0-7777B. ID=N. IDENTIFIER. N = 0-67B. LS=N. ACS LSM INDEX (WITHIN ACS). N = 0-17B. MA=XX. MAINTENANCE MODE (EM HALF SIZE). XX = ON OR OFF. MC=N. ESM SIDE DOOR PORT CHANNEL NUMBER. N=0-13B, 20-33B. ND=N. NPU OR MAINFRAME INTERFACE (MDI) NODE NUMBER. N = 1-77B. NT=N. MAINFRAME INTERFACE (MDI) NODE NUMBER (TRANSPORT FUNCTION NODE). N = 1-377B. N = 1-77B. PA=N. ACS PANEL INDEX (WITHIN LSM). N = 0-23B. PI=N. PIP INDEX. N = 1-4. PN=N. PARTITION NUMBER. N = 0-17B. CANNOT EXCEED THE TOTAL NUMBER OF PARTITIONS LESS ONE FOR THE DEVICE. REQUIRED IF DEFINING A PARTITIONED DEVICE USING INDIVIDUAL ENTRIES FOR EACH PARTITION. PS=X. PAPER SIZE. X = S OR L. PT=N. PORT NUMBER OR NUMBER OF PORTS. N = 0 OR 1 IF *TY* IS *RM*. = 1-1000B IF *TY* IS *TT*. SA=XX. SYSTEM AUTOSTART MODULE (SAM) FLAG. XX = ON - *SAM* IS PRESENT. XX = OFF - *SAM* IS ABSENT. ST=XX. DEVICE STATUS. XX = *ON*, *IDLE*, *OFF*, OR *DOWN*. SZ=N. EXTENDED MEMORY SIZE/1000B. N = 400B, 1000B, 2000B, 4000B, OR 10000B IF ECS 1, ECS 2, OR LCME. = 10B - 100000B IF ESM OR STORNET. = 10B - (100000B-MINCM) IF UEM. TF=XXX. TAPE FLAG. XXX = ATS - 67X (ATS) UNIT. = FSC - FSC UNIT. = MTS - 66X (MTS) UNIT. = IST - 639 UNIT. (ISMT SUPPORTS ONLY ONE CHANNEL PER UNIT - AVAILABLE ON CYBER 170 - 810/815/825/830 MAINFRAMES) = CMTGE - 698 (CMTS) UNIT. = ATSGE - ATS UNIT/GE CAPABILITY. = FSCGE - FSC UNIT/GE CAPABILITY. TN=N. PRINTER WITH TRAIN CARTRIDGE N. N = 0-7. UN=U1/.../UN. UNIT NUMBER(S). UN=U1-UN. (HORIZONTALLY CONTIGUOUS UNITS) N = 0-77B. (RANGE SPECIFICATIONS FOR *DD* AND *DG* DEVICES MUST NOT SPAN CONTROL MODULES) W0=N. EST ENTRY WORD 0 (20 OCTAL DIGITS). W1=N. EST ENTRY WORD 1 (20 OCTAL DIGITS). *WEOR *WEOR
cdc/nos2.source/opl871/eqpinst.txt · Last modified: 2023/08/05 17:24 by Site Administrator