cdc:nos2.source:opl.opl871:deck:config
Deck CONFIG
Library Member Format: MODIFY
Listing Sections
- Deck CONFIG Start
- Deck CONFIG Part 1 (Line 1500)
Source
Seq # *Modification Id* Act ----------------------------+ 00001 M00S00001.config +++| IDENT CONFIG,FWA 00002 M00S00002.config +++| ABS 00003 M00S00003.config +++| SST 00004 M00S00004.config +++| ENTRY CONFIG 00005 M00S00005.config +++| ENTRY RFL= 00006 M00S00006.config +++| ENTRY SSJ= 00007 M00S00007.config +++| SYSCOM B1 00008 M00S00008.config +++| CONFIG TITLE CONFIG - CONFIGURE MASS STORAGE. 00009 M00S00009.config +++|*COMMENT CONFIG - CONFIGURE MASS STORAGE.
| Line S00010 Modification History | |
|---|---|
M01 (Removed by) | 281l803 |
Seq # *Modification Id* Act ----------------------------+ 00010 M01S00010.281l803 ---| COMMENT COPYRIGHT CONTROL DATA CORPORATION. 1982.
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | 281l803 |
Seq # *Modification Id* Act ----------------------------+ 00011 M01S00001.281l803 +++| COMMENT COPYRIGHT CONTROL DATA SYSTEMS INC. 1992. 00012 M00S00011.config +++| CONFIG SPACE 4,10 00013 M00S00012.config +++|***** CONFIG - CONFIGURE MASS STORAGE. 00014 M00S00013.config +++|* 00015 M00S00014.config +++|* A. J. BEEKMAN. 77/04/25. 00016 M00S00015.config +++|* W. E. GOEBEL 80/02/29. 00017 M00S00016.config +++|* 00018 M00S00017.config +++|* *CONFIG* PROVIDES THE CAPABILITY TO REPAIR OR RECONFIGURE 00019 M00S00018.config +++|* 844 OR 885 DEVICES ON-LINE. 00020 M00S00019.config +++| SPACE 4,10 00021 M00S00020.config +++|*** *CONFIG* ACCEPTS OPERATOR INPUT THROUGH A K-DISPLAY, VERIFIES 00022 M00S00021.config +++|* THE ENTERED PARAMETERS AND THEN USES THESE PARAMETERS WHILE 00023 M00S00022.config +++|* CALLING THE PP PROGRAM *1RM* TO RECONFIGURE OR SUSPEND 00024 M00S00023.config +++|* 844 OR 885 TYPE RMS DEVICES. 00025 M00S00024.config +++| SPACE 4,10
| Line S00025 Modification History | |
|---|---|
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00026 M01S00025.v23l617 ---|*** CONTROL STATEMENT CALL.
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00027 M01S00001.v23l617 +++|*** COMMAND. 00028 M00S00026.config +++|* 00029 M00S00027.config +++|* CONFIG. *CONFIG* IS INITIATED BY *CMS* WHEN AN IDLED 00030 M00S00028.config +++|* DEVICE IS FOUND. 00031 M00S00029.config +++| SPACE 4,10 00032 M00S00030.config +++|*** K-DISPLAY INPUT DATA. 00033 M00S00031.config +++|* 00034 M00S00032.config +++|* DATA ITEMS ARE PARTITIONED WITH SEPARATOR CHARACTERS, I.E., 00035 M00S00033.config +++|* ANY NON-ALPHANUMERIC CHARACTER EXCEPT *=*. EACH VALUE 00036 M00S00034.config +++|* MUST BE PRECEDED BY A PARAMETER AND SEPARATED FROM THE 00037 M00S00035.config +++|* PARAMETER BY AN *=*. ONLY ONE DATA ITEM (PARAMETER= 00038 M00S00036.config +++|* VALUE OR COMMAND) MAY BE ENTERED ON A LINE OF INPUT AND NO 00039 M00S00037.config +++|* LINE TERMINATOR IS NECESSARY. 00040 M00S00038.config +++|* 00041 M00S00039.config +++|* THE FOLLOWING IS A DESCRIPTION OF PARAMETERS. 00042 M00S00040.config +++|*
| Line S00041 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00043 M01S00041.ns22000 ---|* EQ=EE EQUIPMENT *EE* IS TO BE PROCESSED.
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00044 M01S00001.ns22000 +++|* EQ=EEE EST ORDINAL *EEE* IS TO BE PROCESSED. 00045 M00S00042.config +++|* THIS PARAMETER IS ENTERED WHEN THE PROCESSING 00046 M00S00043.config +++|* OF EQUIPMENTS IS ORDER-DEPENDENT. THIS IS 00047 M00S00044.config +++|* NEEDED, FOR EXAMPLE, WHEN A UNIT MUST FIRST BE 00048 M00S00045.config +++|* FREED UP TO REPLACE A FAILING UNIT. IN THIS 00049 M00S00046.config +++|* CASE A UNIT IS DELETED FROM AN EQUIPMENT WHERE 00050 M00S00047.config +++|* IT IS NOT IN USE SO THAT IT CAN REPLACE A UNIT 00051 M00S00048.config +++|* WHICH IS FAILING. 00052 M00S00049.config +++|* 00053 M00S00050.config +++|* CH=C1,C2 CHANNEL(S) TO BE USED UNDER NEW DEVICE 00054 M00S00051.config +++|* DEFINITION. THIS PARAMETER IS USED WHEN THE 00055 M00S00052.config +++|* ENTIRE DEVICE IS TO BE REDEFINED TO AN ALTERNATE 00056 M00S00053.config +++|* CHANNEL STRING. IT CAN ALSO BE USED TO ADD OR 00057 M00S00054.config +++|* DELETE CHANNELS FROM AN EQUIPMENT DEFINITION. 00058 M00S00055.config +++|* 00059 M00S00056.config +++|* UL=U1,U2,... UN UNIT LIST FOR NEW CONFIGURATION. WHEN 00060 M00S00057.config +++|* A UNIT IS TO BE REPLACED, ADDED OR DELETED 00061 M00S00058.config +++|* THE ENTIRE UNIT CONFIGURATION MUST BE ENTERED 00062 M00S00059.config +++|* WITH THIS PARAMETER. IF A UNIT IS TO BE 00063 M00S00060.config +++|* ADDED OR DELETED THE EQUIPMENT MUST BE GLOBALLY 00064 M00S00061.config +++|* UNLOADED IF SHARED OR HAVE UNAVAILABLE STATUS 00065 M00S00062.config +++|* OTHERWISE. 00066 M00S00063.config +++|* 00067 M00S00064.config +++|* UR=UU UNIT *UU* IS TO BE RECABLED. THIS OPTION IS USED 00068 M00S00065.config +++|* WHEN A UNIT IS TO BE REPLACED BY A NEW UNIT WITH 00069 M00S00066.config +++|* THE SAME UNIT NUMBER. THIS IS DONE BY PHYSICALLY 00070 M00S00067.config +++|* DISCONNECTING THE OLD UNIT AND RECABLING IN THE 00071 M00S00068.config +++|* REPLACEMENT UNIT. MULTIPLE UNITS MAY BE 00072 M00S00069.config +++|* SPECIFIED FOR RECABLING. 00073 M00S00070.config +++| SPACE 4,10 00074 M00S00071.config +++|*** K-DISPLAY COMMANDS. 00075 M00S00072.config +++|* 00076 M00S00073.config +++|* GO. INITIATE PROCESSING OF RECONFIGURATION RUN USING 00077 M00S00074.config +++|* PARAMETERS ENTERED. THE K-DISPLAY PARAMETERS WILL BE 00078 M00S00075.config +++|* SET TO THE DEFAULT VALUES WHEN CONTROL IS RETURNED. 00079 M00S00076.config +++|* 00080 M00S00077.config +++|* SUSPEND. ALL REQUESTS TO CURRENT EQUIPMENT ARE SUSPENDED. 00081 M00S00078.config +++|* THIS IS DONE SO THAT THE DRIVE MAY BE REPAIRED 00082 M00S00079.config +++|* ON LINE. MULTIPLE EQUIPMENTS MAY BE SUSPENDED 00083 M00S00080.config +++|* CONCURRENTLY. 00084 M00S00081.config +++|* 00085 M00S00082.config +++|* CLEAR. CLEARS THE SUSPEND AND IDLE STATUS FOR CURRENT 00086 M00S00083.config +++|* EQUIPMENT. THIS IS ENTERED WHEN THE EQUIPMENT IS 00087 M00S00084.config +++|* TO BE RETURNED FOR NORMAL SYSTEM USE. 00088 M00S00085.config +++|* 00089 M00S00086.config +++|* END. ENDS *CONFIG* PROCESSING. 00090 M00S00087.config +++|* 00091 M00S00088.config +++|* RERUN. SET THE PARAMETERS TO THEIR DEFAULT VALUES AND UPDATE 00092 M00S00089.config +++|* THE LIST OF EQUIPMENTS TO BE RECONFIGURED. 00093 M00S00090.config +++|* 00094 M00S00091.config +++|* RESET. RESET THE PARAMETERS TO THEIR DEFAULT VALUES. 00095 M00S00092.config +++|* 00096 M00S00093.config +++|* 00097 M00S00094.config +++|* THE FOLLOWING COMMANDS ARE ENTERED IN RESPONSE TO AN 00098 M00S00095.config +++|* ERROR CONDITION DETECTED BY *1RM*. 00099 M00S00096.config +++|* 00100 M00S00097.config +++|* ABORT. THIS COMMAND IS ENTERED TO DISCONTINUE PROCESSING 00101 M00S00098.config +++|* OF THE CURRENT COMMAND IN PROGRESS. 00102 M00S00099.config +++|* 00103 M00S00100.config +++|* IGNORE. THE ERROR CONDITION DETECTED BY *1RM* IS TO 00104 M00S00101.config +++|* BE IGNORED. THIS COMMAND SHOULD BE USED WITH 00105 M00S00102.config +++|* DISCRETION. IT SHOULD BE USED ONLY WHEN THE 00106 M00S00103.config +++|* ERROR BEING POSTED IS WELL UNDERSTOOD AND 00107 M00S00104.config +++|* CAN LEGITIMATELY BE IGNORED. 00108 M00S00105.config +++|* 00109 M00S00106.config +++|* NEXT. THIS COMMAND IS ENTERED IN RESPONSE TO AN 00110 M00S00107.config +++|* 885 SERVO TIMING CHECK WHEN THE TIMING DATA 00111 M00S00108.config +++|* IS IN THE REQUIRED RANGE. ENTRY OF THIS 00112 M00S00109.config +++|* COMMAND WILL CAUSE PROCESSING TO CONTINUE 00113 M00S00110.config +++|* WITH EITHER THE NEXT UNIT OR THE NEXT STEP 00114 M00S00111.config +++|* OF PROCESSING. 00115 M00S00112.config +++|* 00116 M00S00113.config +++|* RECHECK. THIS COMMAND IS ENTERED TO RETRY A PROCESS 00117 M00S00114.config +++|* WHICH PREVIOUSLY GAVE AN ERROR. IF THE ERROR 00118 M00S00115.config +++|* PERSISTS THE MESSAGE WILL BE POSTED AGAIN 00119 M00S00116.config +++|* WITH ANOTHER OPPORTUNITY FOR OPERATOR ACTION. 00120 M00S00117.config +++| SPACE 4,10 00121 M00S00118.config +++|*** OPERATIONAL CONSIDERATIONS. 00122 M00S00119.config +++|* 00123 M00S00120.config +++|* WHEN REPLACING A FAILING UNIT WITH A NEW UNIT THE 00124 M00S00121.config +++|* NEW UNIT MUST NOT BE DEFINED IN THE EST. IF THE 00125 M00S00122.config +++|* REPLACEMENT UNIT IS DEFINED IN THE EST IT MUST 00126 M00S00123.config +++|* FIRST BE DELETED FROM THE EQUIPMENT IN WHICH IT IS 00127 M00S00124.config +++|* DEFINED. 00128 M00S00125.config +++|* WHEN ADDING OR DELETING A UNIT FROM AN EQUIPMENT 00129 M00S00126.config +++|* THE EQUIPMENT MUST BE UNLOADED. 00130 M00S00127.config +++|* 00131 M00S00128.config +++|* 00132 M00S00129.config +++|* WHEN RUNNING IN A MMF ENVIRONMENT CERTAIN PROBLEMS ARISE. 00133 M00S00130.config +++|* THEY ARE AS FOLLOWS - 00134 M00S00131.config +++|* 00135 M00S00132.config +++|* 1) WHEN A UNIT IS INTRODUCED INTO AN EQUIPMENT 00136 M00S00133.config +++|* *CONFIG* WILL CHECK IF THE REPLACEMENT UNIT IS NOT IN 00137 M00S00134.config +++|* USE IN THE MACHINE INITIATING THE RECONFIGURATION, BUT IT 00138 M00S00135.config +++|* CANNOT CHECK IF IT IS IN USE BY THE OTHER MACHINES. THE 00139 M00S00136.config +++|* DESIGN OF THIS PROGRAM DOES NOT SOLVE THIS PROBLEM AND IT 00140 M00S00137.config +++|* IS LEFT TO THE OPERATORS TO ENSURE THAT THE REPLACEMENT 00141 M00S00138.config +++|* UNIT IS TRULY FREE IN THE MMF COMPLEX. 00142 M00S00139.config +++|* 00143 M00S00140.config +++|* 2) WHEN REPLACING A UNIT WITH A NEW UNIT, *CONFIG* 00144 M00S00141.config +++|* WILL CHECK FOR ALL MACHINES ACCESSING THE DEVICE TO COMPLY 00145 M00S00142.config +++|* WITH THE RECONFIGURATION. HOWEVER, IF THE MACHINE DOES NOT 00146 M00S00143.config +++|* HAVE THE DEVICE LOADED THERE IS NO WAY TO CHECK FOR ITS 00147 M00S00144.config +++|* COMPLIANCE. IN THIS CASE THE RECONFIGURATION WILL PROCEED 00148 M00S00145.config +++|* ON THE MACHINES WITH THE DEVICE LOADED AND THE OTHER 00149 M00S00146.config +++|* MACHINES WILL NOT BE ABLE TO USE THIS DEVICE. 00150 M00S00147.config +++|* 00151 M00S00148.config +++|* 3) THE ADDITION AND DELETION OF A UNIT IS INTENDED 00152 M00S00149.config +++|* FOR LOCAL MACHINE USE. WHEN AN ADD OR DELETE IS COMPLETED 00153 M00S00150.config +++|* ON ONE MACHINE, THE REDEFINITION REQUESTED BIT WILL BE 00154 M00S00151.config +++|* CLEARED FOR THAT EQUIPMENT. THUS, NO OTHER MACHINE WILL 00155 M00S00152.config +++|* RECOGNIZE THE REQUEST FOR RECONFIGURATION ON THIS EQUIPMENT. 00156 M00S00153.config +++|* IF MORE THAN ONE MACHINE IN THE COMPLEX WISHES TO ADD OR
| Line S00154 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00157 M01S00154.ns22000 ---|* DELETE UNITS FROM THE SAME SHARED EQUIPMENT, *IDLE,EQNN.*
| Line S00002 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00158 M01S00002.ns22000 +++|* DELETE UNITS FROM THE SAME SHARED EQUIPMENT, *IDLE,EQXXX.* 00159 M00S00155.config +++|* WILL HAVE TO BE ENTERED FROM EACH MACHINE. 00160 M00S00156.config +++| SPACE 4,10 00161 M00S00157.config +++|*** ROUTINES CALLED. 00162 M00S00158.config +++|* 00163 M00S00159.config +++|* *1RM*, *CMS*. 00164 M00S00160.config +++| SPACE 4,10 00165 M00S00161.config +++|*** DAYFILE MESSAGES. 00166 M00S00162.config +++|* 00167 M00S00163.config +++|*
| Line S00164 Modification History | |
|---|---|
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00168 M01S00164.v23l617 ---|* * INVALID CONTROL STATEMENT.* = ARGUMENTS WERE ENTERED 00169 M01S00165.v23l617 ---|* ON THE CONTROL STATEMENT CALL TO *CONFIG*.
| Line S00002 Modification History | |
|---|---|
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00170 M01S00002.v23l617 +++|* * INCORRECT COMMAND.* = INCORRECT ARGUMENTS WERE ENTERED 00171 M01S00003.v23l617 +++|* ON THE *CONFIG* COMMAND. 00172 M00S00166.config +++|*
| Line S00167 Modification History | |
|---|---|
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00173 M01S00167.v23l617 ---|* * INVALID USER ACCESS.* = *CONFIG* WAS CALLED FROM A NON-
| Line S00004 Modification History | |
|---|---|
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00174 M01S00004.v23l617 +++|* * USER ACCESS NOT VALID.* = *CONFIG* WAS CALLED FROM A NON- 00175 M00S00168.config +++|* SYSTEM ORIGIN JOB OR WITHOUT MASS STORAGE SUBSYSTEM ID. 00176 M00S00169.config +++|* 00177 M00S00170.config +++|* * CONFIG UTILITY COMPLETE.* = ALL IDLED EQUIPMENTS HAVE 00178 M00S00171.config +++|* BEEN PROCESSED.
| Line S00172 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00179 M01S00172.ns22000 ---| SPACE 4,10 00180 M01S00173.ns22000 ---|*** ERROR LOG MESSAGES. 00181 M01S00174.ns22000 ---|* 00182 M01S00175.ns22000 ---|* *EQXX REDEFINITION COMPLETE.* = THE REDEFINITION RUN FOR 00183 M01S00176.ns22000 ---|* EQUIPMENT XX HAS COMPLETED SUCCESSFULLY. 00184 M00S00177.config +++| SPACE 4,10 00185 M00S00178.config +++|*** OPERATOR MESSAGES. 00186 M00S00179.config +++|* 00187 M00S00180.config +++|* IF ONE OF THE ERRORS BELOW IS ENCOUNTERED, THE OPERATOR WILL 00188 M00S00181.config +++|* BE ABLE TO CORRECT THE ERROR VIA THE K-DISPLAY. ALL 00189 M00S00182.config +++|* PARAMETERS OR COMMANDS AFTER THE ONE IN ERROR WILL BE 00190 M00S00183.config +++|* IGNORED. 00191 M00S00184.config +++|* 00192 M00S00185.config +++|* 00193 M00S00186.config +++|* **** DEVICE NOT FIRST IN CHAIN. 00194 M00S00187.config +++|* AN EQUIPMENT OTHER THAN THE FIRST EQUIPMENT IN A 00195 M00S00188.config +++|* LINKED DEVICE WAS ENTERED TO BE RECONFIGURED. THIS 00196 M00S00189.config +++|* IS NOT ALLOWED IN ORDER TO PREVENT DESTROYING THE 00197 M00S00190.config +++|* INTEGRITY OF A LINKED DEVICE RECONFIGURATION. 00198 M00S00191.config +++|* 00199 M00S00192.config +++|* **** EQUIPMENT STATUS INCORRECT. 00200 M00S00193.config +++|* THE EQUIPMENT BEING REDEFINED IS NOT UNLOADED AND 00201 M00S00194.config +++|* AS SUCH THE NUMBER OF UNITS CANNOT BE CHANGED. 00202 M00S00195.config +++|* 00203 M00S00196.config +++|* **** ERROR IN CHANNEL NUMBER. 00204 M00S00197.config +++|* MAY INDICATE - 00205 M00S00198.config +++|* 1) IF .LE. 10 PP-S, NOT WITHIN RANGE OF 0-13B. 00206 M00S00199.config +++|* 2) IF .GT. 10 PP-S, NOT WITHIN RANGES OF 0 - 13B 00207 M00S00200.config +++|* OR 20B-33B. 00208 M00S00201.config +++|* 3) 1 (OR MORE) OF CHANNELS SPECIFIED IS DOWN. 00209 M00S00202.config +++|*
| Line S00203 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00210 M01S00203.ns22000 ---|* **** ERROR IN EQUIPMENT NUMBER.
| Line S00003 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00211 M01S00003.ns22000 +++|* **** ERROR IN EST ORDINAL. 00212 M00S00204.config +++|* MAY INDICATE - 00213 M00S00205.config +++|* 1) EQUIPMENT NOT MASS STORAGE. 00214 M00S00206.config +++|* 2) EQUIPMENT IS NOT *844* OR *885*. 00215 M00S00207.config +++|* 00216 M00S00208.config +++|* **** ERROR IN UNIT LIST. 00217 M00S00209.config +++|* MAY INDICATE - 00218 M00S00210.config +++|* 1) A UNIT NUMBER WAS DUPLICATED IN THE UNIT LIST. 00219 M00S00211.config +++|* 2) MORE THAN 3 UNITS WERE SPECIFIED FOR AN *885*. 00220 M00S00212.config +++|*
| Line S00213 Modification History | |
|---|---|
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00221 M01S00213.v23l617 ---|* **** ILLEGAL ENTRY.
| Line S00005 Modification History | |
|---|---|
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00222 M01S00005.v23l617 +++|* **** INCORRECT ENTRY. 00223 M00S00214.config +++|* 1) A KEYWORD WAS NOT FOUND. 00224 M00S00215.config +++|* 2) TOO MANY DIGITS WERE ENTERED AS A PARAMETER. 00225 M00S00216.config +++|* 3) A NON-DIGIT CHARACTER WAS FOUND IN A 00226 M00S00217.config +++|* PARAMETER. 00227 M00S00218.config +++|* 4) A CHARACTER WAS FOUND AFTER THE POST RADIX. 00228 M00S00219.config +++|* 5) AN 8 OR 9 WAS FOUND WITH A *B* POST RADIX. 00229 M00S00220.config +++|*
| Line S00221 Modification History | |
|---|---|
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00230 M01S00221.v23l617 ---|* **** ILLEGAL SEPARATOR.
| Line S00006 Modification History | |
|---|---|
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00231 M01S00006.v23l617 +++|* **** INCORRECT SEPARATOR. 00232 M00S00222.config +++|* A *=* SEPARATOR WAS FOUND FOLLOWING A PARAMETER 00233 M00S00223.config +++|* VALUE OR COMMAND IN THE INPUT STRING. 00234 M00S00224.config +++|* 00235 M00S00225.config +++|* **** INTRODUCED UNIT IN USE. 00236 M00S00226.config +++|* MAY INDICATE - 00237 M00S00227.config +++|* A UNIT BEING INTRODUCED INTO AN EQUIPMENT IS 00238 M00S00228.config +++|* DEFINED ON ANOTHER EQUIPMENT. 00239 M00S00229.config +++|* 00240 M00S00230.config +++|* 00241 M00S00231.config +++|* THE FOLLOWING COMMANDS ARE POSTED ON THE K-DISPLAY BY 00242 M00S00232.config +++|* *1RM*. WHEN *1RM* DETECTS A CONDITION WHICH MAY BE 00243 M00S00233.config +++|* RESPONDED TO BY THE OPERATOR, A MESSAGE IS POSTED AND 00244 M00S00234.config +++|* THE LEGAL COMMANDS ARE POSTED ON THE K-DISPLAY. THE 00245 M00S00235.config +++|* FOLLOWING LIST OF ERROR MESSAGES LISTS THOSE LEGAL 00246 M00S00236.config +++|* COMMANDS AND INDICATES IF AN OPERATOR RESPONSE IS 00247 M00S00237.config +++|* REQUIRED OR OPTIONAL. 00248 M00S00238.config +++|* 00249 M00S00239.config +++|* 00250 M00S00240.config +++|* UNIT XX, CHYY WRITE/READ VERIFY ERROR. 00251 M00S00241.config +++|* PART OF THE VALIDATION PROCEDURE WHEN RETURNING 00252 M00S00242.config +++|* AN EQUIPMENT FOR SYSTEM USE (CLEAR COMMAND) IS 00253 M00S00243.config +++|* TO WRITE A SECTOR OF DATA TO THE DEVICE, READ IT 00254 M00S00244.config +++|* BACK AND VERIFY THE DATA. WHEN THIS VERIFICATION 00255 M00S00245.config +++|* FAILS THE ABOVE MESSAGE APPEARS. 00256 M00S00246.config +++|* COMMANDS - REQUIRED. 00257 M00S00247.config +++|* ABORT, IGNORE, RECHECK. 00258 M00S00248.config +++|* 00259 M00S00249.config +++|* 00260 M00S00250.config +++|* ERROR IN PERFORMING SERVO CHECK ON UNIT XX. 00261 M00S00251.config +++|* THE SERVO ADJUSTMENT PROCEDURE HAS ENCOUNTERED 00262 M00S00252.config +++|* A DISK ERROR CONDITION. 00263 M00S00253.config +++|* COMMANDS - REQUIRED. 00264 M00S00254.config +++|* ABORT, IGNORE, RECHECK. 00265 M00S00255.config +++|* 00266 M00S00256.config +++|* 00267 M00S00257.config +++|* UNIT XX SERVO TIMING= XXX. ACCEPTABLE RANGE IS 325 TO 345. 00268 M00S00258.config +++|* WHEN RECONFIGURING AN 885 HDA A SERVO ADJUSTMENT 00269 M00S00259.config +++|* PROCEDURE IS EXECUTED. THIS PROCEDURE MEASURES 00270 M00S00260.config +++|* SERVO TIMING CHARACTERISTICS WHICH MUST BE IN THE 00271 M00S00261.config +++|* SPECIFIED RANGE. A DRIVE ADJUSTMENT MUST BE MADE 00272 M00S00262.config +++|* BY A CE UNTIL THE TIMING IS IN THE SPECIFIED 00273 M00S00263.config +++|* RANGE. 00274 M00S00264.config +++|* COMMANDS - REQUIRED. 00275 M00S00265.config +++|* ABORT, RECHECK. 00276 M00S00266.config +++|* NEXT. ONLY IF TIMING IS IN RANGE. 00277 M00S00267.config +++|* IGNORE. ONLY IF TIMING IS NOT IN RANGE. 00278 M00S00268.config +++|* 00279 M00S00269.config +++|* 00280 M00S00270.config +++|* ERROR ON LINK DEVICE. 00281 M00S00271.config +++|* WHEN A DEVICE IS SHARED BETWEEN MAINFRAMES THE 00282 M00S00272.config +++|* LINK DEVICE IS READ TO SYNCHRONIZE PROCESSING 00283 M00S00273.config +++|* BETWEEN MACHINES. WHEN AN ERROR OCCURS IN 00284 M00S00274.config +++|* READING THE LINK DEVICE THIS ERROR MESSAGE 00285 M00S00275.config +++|* IS ISSUED. 00286 M00S00276.config +++|* COMMANDS - REQUIRED. 00287 M00S00277.config +++|* ABORT, IGNORE. 00288 M00S00278.config +++|* 00289 M00S00279.config +++|* 00290 M00S00280.config +++|* SPIN DOWN UNIT XX. 00291 M00S00281.config +++|* THIS IS A DIRECTIVE TO THE OPERATOR OR CE TO 00292 M00S00282.config +++|* SPIN DOWN THE SPECIFIED UNIT IN PREPARATION 00293 M00S00283.config +++|* FOR MOVING THE PACK OR HDA. 00294 M00S00284.config +++|* COMMAND - OPTIONAL. 00295 M00S00285.config +++|* ABORT, IGNORE. 00296 M00S00286.config +++|* 00297 M00S00287.config +++|* 00298 M00S00288.config +++|* MOVE PACK FROM UNIT XX TO UNIT YY AND SPIN UP. 00299 M00S00289.config +++|* THIS DIRECTIVE IS ISSUED TO THE OPERATOR FOR 00300 M00S00290.config +++|* EACH UNIT TO BE MOVED DURING A RECONFIGURATION. 00301 M00S00291.config +++|* UNIT XX HAS PREVIOUSLY BEEN DIRECTED TO BE 00302 M00S00292.config +++|* SPUN DOWN AND ITS PACK OR HDA IS NOW TO BE 00303 M00S00293.config +++|* MOVED TO UNIT YY. 00304 M00S00294.config +++|* COMMANDS - OPTIONAL. 00305 M00S00295.config +++|* ABORT, IGNORE. 00306 M00S00296.config +++|* 00307 M00S00297.config +++|* 00308 M00S00298.config +++|* UNIT XX, CHYY LABEL READ ERROR. 00309 M00S00299.config +++|* IN VERIFYING THAT THE CORRECT LABEL IS PRESENT 00310 M00S00300.config +++|* ON UNIT XX A DISK ERROR OCCURRED WHICH PREVENTED 00311 M00S00301.config +++|* THE LABEL FROM BEING READ SUCCESSFULLY. 00312 M00S00302.config +++|* THE CHANNEL IS SPECIFIED IN THE MESSAGE AND 00313 M00S00303.config +++|* MAY BE HELPFUL IF THE VERIFY ERROR OCCURS 00314 M00S00304.config +++|* ONLY FROM A SINGLE CHANNEL IN A DUAL ACCESS 00315 M00S00305.config +++|* CONFIGURATION. 00316 M00S00306.config +++|* COMMANDS - REQUIRED. 00317 M00S00307.config +++|* ABORT, IGNORE, RECHECK. 00318 M00S00308.config +++|* 00319 M00S00309.config +++|* 00320 M00S00310.config +++|* UNIT XX, CHYY LABEL VERIFICATION ERROR. 00321 M00S00311.config +++|* THE LABEL SECTOR WAS READ BUT THE DATA IN THE 00322 M00S00312.config +++|* LABEL SECTOR IS NOT CORRECT. 00323 M00S00313.config +++|* COMMANDS - REQUIRED. 00324 M00S00314.config +++|* ABORT, IGNORE, RECHECK. 00325 M00S00315.config +++|* 00326 M00S00316.config +++|* 00327 M00S00317.config +++|* WAITING FOR MACHINE ID=XX. 00328 M00S00318.config +++|* A SHARED DEVICE IS BEING PROCESSED AND IT HAS 00329 M00S00319.config +++|* BEEN DETECTED THAT MACHINE IDXX IS NOT AT THE 00330 M00S00320.config +++|* SAME STAGE OF PROCESSING AS THIS MACHINE. 00331 M00S00321.config +++|* COMMANDS - REQUIRED. 00332 M00S00322.config +++|* ABORT, IGNORE. 00333 M00S00323.config +++| SPACE 4,10 00334 M00S00324.config +++|**** ASSEMBLY CONSTANTS. 00335 M00S00325.config +++| 00336 M00S00326.config +++| 00337 M00S00327.config +++| OBUFL EQU 1001B OUTPUT BUFFER LENGTH
| Line S00328 Modification History | |
|---|---|
M01 (Removed by) | confi3 |
Seq # *Modification Id* Act ----------------------------+ 00338 M01S00328.confi3 ---| KMLL EQU 44 LINES IN K-DISPLAY BEFORE MESSAGE BUFFER
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | confi3 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00339 M02S00001.241l630 ---| KMLL EQU 43 LINES IN K-DISPLAY BEFORE MESSAGE BUFFER 00340 M00S00329.config +++| KCML EQU 12 COMMAND LINES IN K-DISPLAY
| Line S00330 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00341 M01S00330.241l630 ---| KEQL EQU 4 EQUIPMENT DISPLAY LINES IN K-DISPLAY 00342 M01S00331.241l630 ---| KLNL EQU 8 K-DISPLAY LINE LENGTH INCLUDING HEADER
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00343 M01S00001.241l630 +++| KEQL EQU 7 MAX NUMBER OF IDLED EQUIPMENTS DISPLAYED 00344 M01S00002.241l630 +++| KLNL EQU 7 K-DISPLAY LINE LENGTH INCLUDING HEADER 00345 M00S00332.config +++| NSCI EQU 80 NUMBER OF CHARACTERS TO SCAN ON INPUT 00346 M00S00333.config +++| 00347 M00S00334.config +++| 00348 M00S00335.config +++|**** 00349 M00S00336.config +++| SPACE 4,10 00350 M00S00337.config +++|*CALL COMCMAC
| Line S00007 Modification History | |
|---|---|
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00351 M01S00007.v23l617 +++|*CALL COMCDCM
| Line S00003 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00352 M01S00003.241l630 +++|*CALL COMCDCP 00353 M00S00338.config +++|*CALL COMSSSD 00354 M00S00339.config +++|*CALL COMSSSJ 00355 M00S00340.config +++| LIST G,X 00356 M00S00341.config +++|*CALL COMS1RM 00357 M00S00342.config +++| LIST * 00358 M00S00343.config +++| MACROS TITLE MACROS. 00359 M00S00344.config +++| CALL1RM SPACE 4,10 00360 M00S00345.config +++|** CALL1RM - CALL *1RM* TO PERFORM SPECIFIED FUNCTION. 00361 M00S00346.config +++|* 00362 M00S00347.config +++|* CALL1RM F 00363 M00S00348.config +++|* F = FUNCTION CODE AS DEFINED IN *COMS1RM*. 00364 M00S00349.config +++|* 00365 M00S00350.config +++|* USES X - 6. 00366 M00S00351.config +++|* 00367 M00S00352.config +++|* CALLS CRM. 00368 M00S00353.config +++| 00369 M00S00354.config +++| 00370 M00S00355.config +++| CALL1RM MACRO F 00371 M00S00356.config +++| MACREF CALL1RM 00372 M00S00357.config +++| SX6 F*2+1 00373 M00S00358.config +++| RJ CRM
| Line S00359 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00374 M01S00359.241l630 ---| ENDM 00375 M01S00360.241l630 ---| D SPACE 4,10 00376 M01S00361.241l630 ---|** D - GENERATE DISPLAY LINE FOR *K-DISPLAY*. 00377 M01S00362.241l630 ---|* 00378 M01S00363.241l630 ---|* D C C = CHARACTER DATA TO BE DISPLAYED. 00379 M01S00364.241l630 ---|* DATA IS DISPLAYED LEFT-JUSTIFIED. 00380 M01S00365.241l630 ---| 00381 M01S00366.241l630 ---| 00382 M01S00367.241l630 ---| D MACRO C 00383 M01S00368.241l630 ---| IFC NE,+C++,2 00384 M01S00369.241l630 ---| VFD 12/7756B-10*K,36/6H ,12/6000B
| Line S00370 Modification History | |
|---|---|
M01 (Removed by) | v23l617 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00385 M02S00370.241l630 ---| DATA H+C+
| Line S00008 Modification History | |
|---|---|
M01 (Added by) | v23l617 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00386 M02S00008.241l630 ---| DATA L+C+
| Line S00371 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00387 M01S00371.241l630 ---| K SET K+1 00388 M01S00372.241l630 ---| ENDM
| Line S00004 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00389 M01S00004.241l630 +++| CALL1RM ENDM 00390 M00S00373.config +++| GETLCW SPACE 4,10 00391 M00S00374.config +++|** GETLCW - GET LOW CORE WORDS. 00392 M00S00375.config +++|* 00393 M00S00376.config +++|* GETLCW WC,LC,AD 00394 M00S00377.config +++|* WC = WORD COUNT OF LOW CORE WORDS TO READ. 00395 M00S00378.config +++|* LC = ADDRESS OF LOW CORE WORDS. 00396 M00S00379.config +++|* AD = ADDRESS TO STORE LOW CORE WORDS. 00397 M00S00380.config +++|* 00398 M00S00381.config +++|* USES X - 1, 2, 3. 00399 M00S00382.config +++|* 00400 M00S00383.config +++|* CALLS GLC. 00401 M00S00384.config +++| 00402 M00S00385.config +++| 00403 M00S00386.config +++| GETLCW MACRO WC,FR,AD 00404 M00S00387.config +++| MACREF GETLCW 00405 M00S00388.config +++| R= X1,WC 00406 M00S00389.config +++| R= X2,FR 00407 M00S00390.config +++| R= X3,AD 00408 M00S00391.config +++| RJ GLC
| Line S00392 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00409 M01S00392.241l630 ---| ENDM
| Line S00005 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00410 M01S00005.241l630 +++| GETLCW ENDM 00411 M00S00393.config +++| KEYWORD SPACE 4,10 00412 M00S00394.config +++|** KEYWORD - DEFINE COMMAND AND PARAMETER ENTRY POINTS. 00413 M00S00395.config +++|* 00414 M00S00396.config +++|* KEYWORD E 00415 M00S00397.config +++|* E = KEYBOARD KEYWORD SYNTAX. 00416 M00S00398.config +++|* AN *=* IS APPENDED TO THE KEYWORD OF AN EQUIVALENCED 00417 M00S00399.config +++|* PARAMETER. THIS MACRO DEFINES BOTH COMMAND AND 00418 M00S00400.config +++|* PARAMETER KEYWORDS. 00419 M00S00401.config +++| 00420 M00S00402.config +++| 00421 M00S00403.config +++| KEYWORD MACRO KEYWRD,PR 00422 M00S00404.config +++| MACREF KEYWORD 00423 M00S00405.config +++| KYMX SET KYMX+1 00424 M00S00406.config +++| IFC NE,*PR*0*,1 00425 M00S00407.config +++| PR SUBR 00426 M00S00408.config +++| KEY RMT 00427 M00S00409.config +++| A MICRO 1,,=KEYWRD= 00428 M00S00410.config +++| ORG TKEY+."A" 00429 M00S00411.config +++| VFD 42/0L_KEYWRD,18/PR 00430 M00S00412.config +++| KEY RMT
| Line S00413 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00431 M01S00413.241l630 ---| ENDM
| Line S00006 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00432 M01S00006.241l630 +++| KEYWORD ENDM 00433 M00S00414.config +++| 00434 M00S00415.config +++| KYMX SET 0 INITIALIZE KEYWORD COUNT
| Line S00007 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00435 M01S00007.241l630 +++| MOVEDL SPACE 4,15 00436 M01S00008.241l630 +++|** MOVEDL - MOVE DISPLAY LINE. 00437 M01S00009.241l630 +++|* 00438 M01S00010.241l630 +++|* *MOVEDL* IS USED TO MOVE A DISPLAY LINE TO A K-DISPLAY 00439 M01S00011.241l630 +++|* BUFFER WHICH HAS THE X,Y COORDINATES IN THE FIRST 24 BITS 00440 M01S00012.241l630 +++|* OF EACH LINE. 00441 M01S00013.241l630 +++|* 00442 M01S00014.241l630 +++|* MOVEDL COUNT,FROM,TO 00443 M01S00015.241l630 +++|* 00444 M01S00016.241l630 +++|* COUNT = WORD COUNT OF BLOCK TO BE MOVED. 00445 M01S00017.241l630 +++|* FROM = ADDRESS OF FIRST WORD OF SOURCE. 00446 M01S00018.241l630 +++|* TO = ADDRESS OF FIRST WORD OF DESTINATION. 00447 M01S00019.241l630 +++|* 00448 M01S00020.241l630 +++|* USES X - 1, 2, 3. 00449 M01S00021.241l630 +++|* 00450 M01S00022.241l630 +++|* CALLS MPL. 00451 M01S00023.241l630 +++| 00452 M01S00024.241l630 +++| 00453 M01S00025.241l630 +++| MOVEDL MACRO COUNT,FROM,TO 00454 M01S00026.241l630 +++| MACREF MOVEDL 00455 M01S00027.241l630 +++| R= X1,COUNT 00456 M01S00028.241l630 +++| R= X2,FROM 00457 M01S00029.241l630 +++| R= X3,TO 00458 M01S00030.241l630 +++| RJ MPL 00459 M01S00031.241l630 +++| MOVEDL ENDM 00460 M00S00416.config +++| TITLE KEYWORD DEFINITION FOR *CONFIG* COMMANDS.
| Line S00417 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00461 M01S00417.241l630 ---| CDEF CLEAR,(CLEARS IDLE AND SUSPEND ON CURRENT EQUIPMENT.) 00462 M01S00418.241l630 ---| CDEF END,(CLEAR ALL DEVICE IDLES, AND END *CONFIG*.) 00463 M01S00419.241l630 ---| CDEF GO,(INITIATES PROCESSING OF ENTERED CONFIGURATION.) 00464 M01S00420.241l630 ---| CDEF RERUN,(RESTARTS *CONFIG* UTILITY PROCESSING.) 00465 M01S00421.241l630 ---| CDEF RESET,(RESETS CURRENT EQUIPMENT TO DEFAULT PARAMETERS.) 00466 M01S00422.241l630 ---| CDEF SUSPEND,(SUSPEND ALL SYSTEM OPERATION ON CURRENT EQUIPMENT.) 00467 M01S00423.241l630 ---| CDEF (CH=C1,C2),(C1 AND OPTIONALLY C2 ARE NEW CHANNELS FOR ACCESS.)
| Line S00032 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00468 M01S00032.241l630 +++| CDEF CLEAR,(CLEAR IDLE AND SUSPEND ON CURRENT EQUIPMENT.) 00469 M01S00033.241l630 +++| CDEF END,(CLEAR ALL DEVICE IDLES AND END *CONFIG*.) 00470 M01S00034.241l630 +++| CDEF GO,(INITIATE PROCESSING OF ENTERED CONFIGURATION.) 00471 M01S00035.241l630 +++| CDEF RERUN,(RESTART *CONFIG* UTILITY PROCESSING.) 00472 M01S00036.241l630 +++| CDEF RESET,(RESET CURRENT EQUIPMENT TO DEFAULT PARAMETERS.) 00473 M01S00037.241l630 +++| CDEF SUSPEND,(SUSPEND SYSTEM OPERATION ON CURRENT EQUIPMENT.) 00474 M01S00038.241l630 +++| CDEF (CH=C1,C2),(C1 AND OPTIONALLY C2 ARE NEW ACCESS CHANNELS.)
| Line S00424 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00475 M01S00424.ns22000 ---| CDEF (EQ=EE),(SET EQUIPMENT EE TO BE PROCESSED.)
| Line S00004 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00476 M01S00004.ns22000 +++| CDEF (EQ=EEE),(SET EST ORDINAL EEE TO BE PROCESSED.)
| Line S00425 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00477 M01S00425.241l630 ---| CDEF (UL=U1,U2 .,UN),(SET UNIT LIST AS SPECIFIED.)
| Line S00039 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00478 M01S00039.241l630 +++| CDEF (UL=U1,U2,...),(SET UNIT LIST AS SPECIFIED.) 00479 M00S00426.config +++| CDEF (UR=UU),(UNIT UU IS TO BE RECABLED WITH A NEW DRIVE.) 00480 M00S00427.config +++| TITLE RESERVED LOCATIONS AND FETS. 00481 M00S00428.config +++| ORG 102B 00482 M00S00429.config +++| 00483 M00S00430.config +++|* RESERVED LOCATIONS. 00484 M00S00431.config +++| 00485 M00S00432.config +++| 00486 M00S00433.config +++| FWA BSS 0 00487 M00S00434.config +++| ESTA CON 0 EST ADDRESS
| Line S00005 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00488 M01S00005.ns22000 +++| LMSO CON 0 LAST MASS STORAGE EST ORDINAL + 1 00489 M00S00435.config +++| MMFF CON 0 MULTI-MAINFRAME FLAG 00490 M00S00436.config +++| NPPU CON 0 NUMBER OF PPU-S IN SYSTEM 00491 M00S00437.config +++| SLMP CON 0 STRING BUFFER LIMIT POINTER 00492 M00S00438.config +++| SPTR CON 0 STRING BUFFER POINTER 00493 M00S00439.config +++| TEMP CON 0 TEMPORARY 00494 M00S00440.config +++| SPACE 4,10 00495 M00S00441.config +++|* *1RM* CALL BLOCK. 00496 M00S00442.config +++| 00497 M00S00443.config +++| 00498 M00S00444.config +++| B1RM BSS 0 *1RM* CALL BLOCK 00499 M00S00445.config +++| 00500 M00S00446.config +++| LOC 0 00501 M00S00447.config +++| 00502 M00S00448.config +++|* WHILE *1RM* IS ACTIVE K-DISPLAY INPUT IS INTERPRETED BY 00503 M00S00449.config +++|* *CONFIG* AND THE COMMAND CODE PASSED TO *1RM*. THE 00504 M00S00450.config +++|* COMMANDS WHICH ARE LEGAL FOR *1RM* TO ACCEPT ARE SET IN 00505 M00S00451.config +++|* THE CALL BLOCK BY *1RM* IN THE FORM OF A BIT MAP. THIS 00506 M00S00452.config +++|* BIT MAP IS ALSO USED TO GENERATE A DESCRIPTION OF LEGAL 00507 M00S00453.config +++|* COMMANDS IN THE DISPLAY. 00508 M00S00454.config +++| 00509 M00S00455.config +++| RFNB VFD 48/0 00510 M00S00456.config +++| VFD 11/0 *1RM* FUNCTION CODE 00511 M00S00457.config +++| VFD 1/0 FUNCTION IN PROGRESS BIT 00512 M00S00458.config +++| 00513 M00S00459.config +++| TPAR BSS 0 TABLE OF LEGAL PARAMETERS 00514 M00S00460.config +++| POS .CLEAR 00515 M00S00461.config +++| VFD 1/1 00516 M00S00462.config +++| POS .END 00517 M00S00463.config +++| VFD 1/1 00518 M00S00464.config +++| POS .GO 00519 M00S00465.config +++| VFD 1/1 00520 M00S00466.config +++| POS .RERUN 00521 M00S00467.config +++| VFD 1/1 00522 M00S00468.config +++| POS .RESET 00523 M00S00469.config +++| VFD 1/1 00524 M00S00470.config +++| POS .SUSPEND 00525 M00S00471.config +++| VFD 1/1 00526 M00S00472.config +++| POS .CH 00527 M00S00473.config +++| VFD 1/1 00528 M00S00474.config +++| POS .EQ 00529 M00S00475.config +++| VFD 1/1 00530 M00S00476.config +++| POS .UL 00531 M00S00477.config +++| VFD 1/1 00532 M00S00478.config +++| POS .UR 00533 M00S00479.config +++| VFD 1/1 00534 M00S00480.config +++| TCOM CON 0 COMMANDS TO PASS TO *1RM* 00535 M00S00481.config +++| CUEQ CON 0 CURRENT EQUIPMENT 00536 M00S00482.config +++| URCD CON 0 UNITS TO RECONFIGURE OR RECABLE 00537 M00S00483.config +++| ESTD CON 0 NEW EST ENTRY FOR CURRENT EQUIPMENT 00538 M00S00484.config +++| MSTD BSS MSTL NEW MST FOR CURRENT EQUIPMENT 00539 M00S00485.config +++| LOC *O 00540 M00S00486.config +++| SPACE 4,10 00541 M00S00487.config +++|* FETS. 00542 M00S00488.config +++| 00543 M00S00489.config +++| 00544 M00S00490.config +++| O BSS 0 OUTPUT FILE 00545 M00S00491.config +++| OUTPUT FILEB OBUF,OBUFL,(FET=7) 00546 M00S00492.config +++| TITLE CONFIG - MAIN LOOP. 00547 M00S00493.config +++|** CONFIG - MAIN LOOP. 00548 M00S00494.config +++| 00549 M00S00495.config +++| 00550 M00S00496.config +++| CONFIG SB1 1 00551 M00S00497.config +++| RJ PRS PRESET 00552 M00S00498.config +++| RJ BCL OUTPUT INITIAL CONFIGURATION 00553 M00S00499.config +++| 00554 M00S00500.config +++|* INITIATE K-DISPLAY. 00555 M00S00501.config +++| 00556 M00S00502.config +++| SA1 MMFF 00557 M00S00503.config +++| ZR X1,CON1 IF NOT MMF MODE 00558 M00S00504.config +++| CALL1RM RCDF CLEAR DAT INTERLOCK 00559 M00S00505.config +++| CON1 RJ RRC SET VALUES ON K-DISPLAY 00560 M00S00506.config +++| MX6 -5 00561 M00S00507.config +++| SA6 TEMP 00562 M00S00508.config +++| CONSOLE KL 00563 M00S00509.config +++| CON2 RJ UKD UPDATE K-DISPLAY 00564 M00S00510.config +++| RECALL 00565 M00S00511.config +++| SA1 B1RM+CUEQ CHECK FOR EQUIPMENT PRESENT 00566 M00S00512.config +++| NZ X1,CON3 IF EQUIPMENT PRESENT 00567 M00S00513.config +++| SA1 TEMP 00568 M00S00514.config +++| ZR X1,CON1 IF TIME TO CHECK FOR EQUIPMENT 00569 M00S00515.config +++| SX6 X1+B1 00570 M00S00516.config +++| SA6 A1 00571 M00S00517.config +++| 00572 M00S00518.config +++|* CHECK FOR INPUT. 00573 M00S00519.config +++| 00574 M00S00520.config +++| CON3 SA1 KBUF 00575 M00S00521.config +++| ZR X1,CON2 IF NO INPUT 00576 M00S00522.config +++| RJ ISB INPUT STRING BUFFER 00577 M00S00523.config +++| SX7 B0 ASSEMBLE KEYWORD 00578 M00S00524.config +++| RJ ASC 00579 M00S00525.config +++| ZR X4,CON3 IF NO DATA ASSEMBLED 00580 M00S00526.config +++| SB4 1R= 00581 M00S00527.config +++| NE B4,B5,CON4 IF NOT *=* SEPARATOR 00582 M00S00528.config +++| SX1 6 00583 M00S00529.config +++| IX1 X1*X4 00584 M00S00530.config +++| SX5 B5 00585 M00S00531.config +++| SB4 X1-54 00586 M00S00532.config +++| AX5 B4 00587 M00S00533.config +++| BX6 X6+X5 00588 M00S00534.config +++| CON4 RJ SPT 00589 M00S00535.config +++| NZ X5,CON5 IF PARAMETER NOT FOUND 00590 M00S00536.config +++| SA1 CONA SIMULATE RETURN JUMP 00591 M00S00537.config +++| SB4 X3 00592 M00S00538.config +++| BX6 X1 00593 M00S00539.config +++| SA6 B4 00594 M00S00540.config +++| JP B4+1 JUMP TO PROCESSOR 00595 M00S00541.config +++| 00596 M00S00542.config +++|* RETURN FROM PARAMETER PROCESSING. 00597 M00S00543.config +++| 00598 M00S00544.config +++| CON5 ZR X5,CON3 IF NO ERROR 00599 M00S00545.config +++| RJ IDE PROCESSES ERROR 00600 M00S00546.config +++| EQ CON3 LOOP FOR MORE INPUT 00601 M00S00547.config +++|
| Line S00040 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00602 M01S00040.241l630 +++| 00603 M00S00548.config +++| CONA EQ CON5 SIMULATED RETURN JUMP TO PROCESSOR 00604 M00S00549.config +++| TITLE *1RM* COMMAND DEFINITIONS. 00605 M00S00550.config +++|ABORT SPACE 4,10 00606 M00S00551.config +++|** ABORT - ABORT THE CURRENT COMMAND SEQUENCE. 00607 M00S00552.config +++| 00608 M00S00553.config +++| 00609 M00S00554.config +++| KEYWORD ABORT,0 00610 M00S00555.config +++| IGNORE SPACE 4,10 00611 M00S00556.config +++|** IGNORE - IGNORE CURRENT ERROR CONDITION. 00612 M00S00557.config +++| 00613 M00S00558.config +++| 00614 M00S00559.config +++| KEYWORD IGNORE,0 00615 M00S00560.config +++| NEXT SPACE 4,10 00616 M00S00561.config +++|** NEXT - PROCEED TO NEXT UNIT. 00617 M00S00562.config +++| 00618 M00S00563.config +++| 00619 M00S00564.config +++| KEYWORD NEXT,0 00620 M00S00565.config +++| RECHECK SPACE 4,10 00621 M00S00566.config +++|** RECHECK - RETRY PROCESS GIVING ERROR. 00622 M00S00567.config +++| 00623 M00S00568.config +++| 00624 M00S00569.config +++| KEYWORD RECHECK,0 00625 M00S00570.config +++| TITLE CLC - *CLEAR* COMMAND PROCESSOR. 00626 M00S00571.config +++|** CLC - *CLEAR* COMMAND PROCESSOR. 00627 M00S00572.config +++|* 00628 M00S00573.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT TO RECONFIGURE. 00629 M00S00574.config +++|* 00630 M00S00575.config +++|* EXIT REDEFINITION REQUEST CLEARED FOR CURRENT EQUIPMENT. 00631 M00S00576.config +++|* 00632 M00S00577.config +++|* USES A - 1, 6. 00633 M00S00578.config +++|* X - 1, 5, 6. 00634 M00S00579.config +++|* 00635 M00S00580.config +++|* MACRO CALL1RM. 00636 M00S00581.config +++| 00637 M00S00582.config +++| 00638 M00S00583.config +++| KEYWORD CLEAR,CLP 00639 M00S00584.config +++| SA1 B1RM+CUEQ 00640 M00S00585.config +++| ZR X1,CLPX IF NO EQUIPMENT 00641 M00S00586.config +++| RJ FUM CHECK FOR UNIT IN USE 00642 M00S00587.config +++| NZ X5,CLPX IF ERROR DETECTED 00643 M00S00588.config +++| CALL1RM RCLF 00644 M00S00589.config +++| RJ RRC SET NEW EQUIPMENT 00645 M00S00590.config +++| EQ CLPX RETURN 00646 M00S00591.config +++| TITLE END - END COMMAND PROCESSOR. 00647 M00S00592.config +++|** END - *END* COMMAND PROCESSOR. 00648 M00S00593.config +++|* 00649 M00S00594.config +++|* COMPLETE RECONFIGURATION RUN. 00650 M00S00595.config +++|* 00651 M00S00596.config +++|* USES X - 1, 5. 00652 M00S00597.config +++|* A - 1. 00653 M00S00598.config +++|* B - 0. 00654 M00S00599.config +++|* 00655 M00S00600.config +++|* CALLS CAE. 00656 M00S00601.config +++|* 00657 M00S00602.config +++|* MACROS CALL1RM, EXCST, KEYWORD, MESSAGE, SETFS. 00658 M00S00603.config +++| 00659 M00S00604.config +++| 00660 M00S00605.config +++| KEYWORD END,END 00661 M00S00606.config +++| END1 RJ CAE CLEAR ALL EQUIPMENT IDLE REQUESTS 00662 M00S00607.config +++| SA1 MMFF 00663 M00S00608.config +++| ZR X1,END2 IF NOT MMF MODE 00664 M00S00609.config +++| CALL1RM RCDF CLEAR DAT INTERLOCK 00665 M00S00610.config +++| END2 SA1 B1RM+RFNB 00666 M00S00611.config +++| SX5 B0+ INDICATE NO ERROR 00667 M00S00612.config +++| NZ X1,ENDX IF *1RM* STILL ATTACHED 00668 M00S00613.config +++| MESSAGE ENDA * CONFIG UTILITY COMPLETE.* 00669 M00S00614.config +++| SETFS O,0 00670 M00S00615.config +++| EXCST ENDB FORCE CALL TO *CMS* 00671 M00S00616.config +++| ENDRUN 00672 M00S00617.config +++|
| Line S00041 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00673 M01S00041.241l630 +++| 00674 M00S00618.config +++| ENDA DATA C* CONFIG UTILITY COMPLETE.* 00675 M00S00619.config +++| ENDB DATA 4LCMS. 00676 M00S00620.config +++| TITLE GOC - *GO* COMMAND PROCESSOR. 00677 M00S00621.config +++|** GOC - *GO* COMMAND PROCESSOR. 00678 M00S00622.config +++|* 00679 M00S00623.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT TO RECONFIGURE. 00680 M00S00624.config +++|* 00681 M00S00625.config +++|* EXIT (X5) = ERROR MESSAGE ADDRESS. 00682 M00S00626.config +++|* 00683 M00S00627.config +++|* USES A - 1, 2, 3, 4, 6, 7. 00684 M00S00628.config +++|* X - ALL. 00685 M00S00629.config +++|* 00686 M00S00630.config +++|* CALLS BCL, CLD, FUM. 00687 M00S00631.config +++|* 00688 M00S00632.config +++|* MACROS CALL1RM, KEYWORD. 00689 M00S00633.config +++| 00690 M00S00634.config +++| 00691 M00S00635.config +++| KEYWORD GO,GOC 00692 M00S00636.config +++| RJ CLD CHECK FOR LEGAL DEVICE
| Line S00637 Modification History | |
|---|---|
M01 (Removed by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00693 M01S00637.v23l617 ---| NZ X5,GOCX IF ILLEGAL DEVICE
| Line S00009 Modification History | |
|---|---|
M01 (Added by) | v23l617 |
Seq # *Modification Id* Act ----------------------------+ 00694 M01S00009.v23l617 +++| NZ X5,GOCX IF INCORRECT DEVICE 00695 M00S00638.config +++| RJ FUM FIND UNIT IN OTHER MST 00696 M00S00639.config +++| NZ X5,GOCX IF ERROR IN CONFIGURATION 00697 M00S00640.config +++| CALL1RM RDDF 00698 M00S00641.config +++| RJ BCL BUILD CONFIGURATION LIST 00699 M00S00642.config +++| RJ RRC RESET NEW EQUIPMENT 00700 M00S00643.config +++| EQ GOCX RETURN
| Line S00644 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00701 M01S00644.ns22000 ---| 00702 M01S00645.ns22000 ---| GOCD DATA C*EQXX REDEFINITION COMPLETE.* 00703 M00S00646.config +++| TITLE RRC - *RERUN* COMMAND PROCESSOR. 00704 M00S00647.config +++|** RRC - *RERUN* COMMAND PROCESSOR. 00705 M00S00648.config +++|* 00706 M00S00649.config +++|* ENTRY (ESTA) = EST ADDRESS. 00707 M00S00650.config +++|* (MMFF) .NE. 0 IF MMF MODE. 00708 M00S00651.config +++|* 00709 M00S00652.config +++|* EXIT (X1) = CURRENT EQUIPMENT. 00710 M00S00653.config +++|* (X5) = ERROR MESSAGE. 00711 M00S00654.config +++|* (CUEQ) = CURRENT EQUIPMENT TO RECONFIGURE. 00712 M00S00655.config +++|* (CUEQ), (ESTB), (MSTD), AND K-DISPLAY RESET. 00713 M00S00656.config +++|* 00714 M00S00657.config +++|* USES A - 1, 2, 5, 6, 7. 00715 M00S00658.config +++|* B - 5, 6. 00716 M00S00659.config +++|* X - 0, 1, 2, 5, 6, 7. 00717 M00S00660.config +++|*
| Line S00661 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00718 M01S00661.ns22000 ---|* CALLS DBL, DUL, RMT, RSC, SML.
| Line S00006 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00719 M01S00006.ns22000 +++|* CALLS EST, RSC, SML. 00720 M00S00662.config +++|* 00721 M00S00663.config +++|* MACROS CALL1RM, GETLCW, KEYWORD. 00722 M00S00664.config +++| 00723 M00S00665.config +++| 00724 M00S00666.config +++| KEYWORD RERUN,RRC 00725 M00S00667.config +++| CALL1RM RUMF
| Line S00668 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00726 M01S00668.ns22000 ---| SA2 ESTA 00727 M01S00669.ns22000 ---| GETLCW NMSD,X2,ESTB
| Line S00007 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00728 M01S00007.ns22000 +++| RJ EST READ EST INTO *ESTB* 00729 M00S00670.config +++| 00730 M00S00671.config +++|* SEARCH FOR EQUIPMENT TO RECONFIGURE. 00731 M00S00672.config +++|
| Line S00673 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00732 M01S00673.ns22000 ---| SX5 B0 INITIALIZE SEARCH LOOP
| Line S00008 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00733 M01S00008.ns22000 +++| SX5 NOPE-1 INITIALIZE EST ORDINAL FOR SEARCH 00734 M00S00674.config +++| SB5 B0 SET EQUIPMENT NOT FOUND 00735 M00S00675.config +++| BX6 X6-X6 CLEAR CURRENT EQUIPMENT
| Line S00676 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00736 M01S00676.ns22000 ---| SB6 B0 SET SHARED EQUIPMENT NUMBER
| Line S00009 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00737 M01S00009.ns22000 +++| SB6 B0 SET SHARED EST ORDINAL 00738 M00S00677.config +++| SA6 B1RM+CUEQ 00739 M00S00678.config +++| SA6 B1RM+URCD CLEAR UNITS TO RECONFIGURE 00740 M00S00679.config +++| RRC1 RJ SML FIND EQUIPMENT 00741 M00S00680.config +++| ZR X5,RRC3 IF END OF EQUIPMENTS 00742 M00S00681.config +++| PL X1,RRC1 IF DEVICE IDLE BIT NOT SET 00743 M00S00682.config +++| NZ B5,RRC2 IF EQUIPMENT PREVIOUSLY FOUND 00744 M00S00683.config +++| SB5 X5
| Line S00684 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00745 M01S00684.ns22000 ---| RRC2 SA1 ESTB+X5 CHECK FOR SHARED
| Line S00010 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00746 M01S00010.ns22000 +++| RRC2 R= X1,ESTE CHECK FOR SHARED DEVICE 00747 M01S00011.ns22000 +++| IX1 X5*X1 00748 M01S00012.ns22000 +++| SA1 ESTB+X1+EQDE READ EST ENTRY 00749 M00S00685.config +++| LX1 59-57 00750 M00S00686.config +++| PL X1,RRC1 IF NOT SHARED 00751 M00S00687.config +++| NZ B6,RRC1 IF SHARED EQUIPMENT FOUND 00752 M00S00688.config +++| SB6 X5 00753 M00S00689.config +++| EQ RRC1 NEXT EQUIPMENT 00754 M00S00690.config +++| 00755 M00S00691.config +++| RRC3 SX6 B6 00756 M00S00692.config +++| NZ B6,RRC4 IF SHARED EQUIPMENT FOUND 00757 M00S00693.config +++| SX6 B5 00758 M00S00694.config +++| RRC4 SA6 B1RM+CUEQ 00759 M00S00695.config +++| RJ RSC RESET PARAMETERS 00760 M00S00696.config +++| SA1 B1RM+CUEQ 00761 M00S00697.config +++| SX5 B0 00762 M00S00698.config +++| EQ RRCX RETURN 00763 M00S00699.config +++| TITLE RSC - *RESET* COMMAND PROCESSOR. 00764 M00S00700.config +++|** RSC - *RESET* COMMAND PROCESSOR. 00765 M00S00701.config +++|* 00766 M00S00702.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT. 00767 M00S00703.config +++|* 00768 M00S00704.config +++|* EXIT (X5) = 0. 00769 M00S00705.config +++|* 00770 M00S00706.config +++|* USES A - 1, 2, 6, 7. 00771 M00S00707.config +++|* B - 2, 3, 5, 6, 7. 00772 M00S00708.config +++|* X - 0, 1, 2, 4, 5, 6, 7. 00773 M00S00709.config +++|* 00774 M00S00710.config +++|* CALLS COD, ZTB. 00775 M00S00711.config +++|* 00776 M00S00712.config +++|* MACROS KEYWORD, MOVE. 00777 M00S00713.config +++| 00778 M00S00714.config +++| 00779 M00S00715.config +++| KEYWORD RESET,RSC 00780 M00S00716.config +++| SA5 B1RM+CUEQ
| Line S00717 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00781 M01S00717.ns22000 ---| SA1 ESTB+X5 RESET EST ENTRY
| Line S00013 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00782 M01S00013.ns22000 +++| R= X1,ESTE 00783 M01S00014.ns22000 +++| IX1 X5*X1 00784 M01S00015.ns22000 +++| SA1 ESTB+X1+EQDE RESET EST ENTRY 00785 M00S00718.config +++| BX6 X1 00786 M00S00719.config +++| BX7 X7-X7 00787 M00S00720.config +++| SA6 B1RM+ESTD 00788 M00S00721.config +++| SA7 B1RM+URCD CLEAR UNITS TO RECONFIGURE 00789 M00S00722.config +++| RJ RMT READ CURRENT EQUIPMENT MST 00790 M00S00723.config +++| MOVE MSTL,MSTB,MSTC 00791 M00S00724.config +++| MOVE MSTL,MSTB,B1RM+MSTD 00792 M00S00725.config +++| RJ UKD UPDATE K-DISPLAY INFORMATION 00793 M00S00726.config +++| EQ RSCX RETURN 00794 M00S00727.config +++| TITLE SSP - *SUSPEND* COMMAND PROCESSOR. 00795 M00S00728.config +++|** SSP - *SUSPEND* COMMAND PROCESSOR. 00796 M00S00729.config +++|* ONLY 885 AND 844 TYPE DEVICES ARE ALLOWED FOR THIS 00797 M00S00730.config +++|* COMMAND. THIS IS BECAUSE THE *6DI* DRIVER IS THE 00798 M00S00731.config +++|* ONLY ONE TO DETECT AND HONOR THE SUSPEND STATUS. 00799 M00S00732.config +++|* 00800 M00S00733.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT. 00801 M00S00734.config +++|* 00802 M00S00735.config +++|* EXIT (X5) = ERROR MESSAGE ADDRESS. 00803 M00S00736.config +++|* 00804 M00S00737.config +++|* USES X - 1, 5. 00805 M00S00738.config +++|* A - 1. 00806 M00S00739.config +++|* 00807 M00S00740.config +++|* CALLS EQP. 00808 M00S00741.config +++|* 00809 M00S00742.config +++|* MACROS CALL1RM, KEYWORD. 00810 M00S00743.config +++| 00811 M00S00744.config +++| 00812 M00S00745.config +++| KEYWORD SUSPEND,SSP 00813 M00S00746.config +++| SA1 B1RM+CUEQ 00814 M00S00747.config +++| ZR X1,SSPX IF NO EQUIPMENT 00815 M00S00748.config +++| SA1 B1RM+ESTD CHECK FOR 885 OR 844 00816 M00S00749.config +++| LX1 59-55
| Line S00750 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00817 M01S00750.ns22000 ---| SX5 EREN **** ERROR IN EQUIPMENT NUMBER.
| Line S00016 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00818 M01S00016.ns22000 +++| SX5 EREN **** ERROR IN EST ORDINAL. 00819 M00S00751.config +++| PL X1,SSPX IF NOT *LDAM* 00820 M00S00752.config +++| CALL1RM RSPF 00821 M00S00753.config +++| EQ SSPX RETURN 00822 M00S00754.config +++| TITLE CHP - *CH* PARAMETER PROCESSOR. 00823 M00S00755.config +++|** CHP - *CH* PARAMETER PROCESSOR. 00824 M00S00756.config +++|* 00825 M00S00757.config +++|* ENTRY (SPTR) = STRING BUFFER ADDRESS OF PREVIOUS CHARACTER. 00826 M00S00758.config +++|* (SLMP) = STRING BUFFER LIMIT POINTER. 00827 M00S00759.config +++|* 00828 M00S00760.config +++|* EXIT (X5) = 0 IF NO ERROR. 00829 M00S00761.config +++|* = ERROR MESSAGE ADDRESS IF ERROR. 00830 M00S00762.config +++|* (SPTR) = UPDATED STRING BUFFER POINTER. 00831 M00S00763.config +++|* VALUE SET IN K-DISPLAY AND PARAMETER TABLE. 00832 M00S00764.config +++|*
| Line S00765 Modification History | |
|---|---|
M01 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 00833 M01S00765.ns2550 ---|* USES X - 0, 1, 2, 5, 6. 00834 M01S00766.ns2550 ---|* A - 1, 2, 6.
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 00835 M01S00001.ns2550 +++|* USES X - 0, 1, 2, 5, 6. 00836 M01S00002.ns2550 +++|* A - 1, 2, 6. 00837 M00S00767.config +++|* B - 1, 2. 00838 M00S00768.config +++|* 00839 M00S00769.config +++|* CALLS CCH, CHA, VON. 00840 M00S00770.config +++| 00841 M00S00771.config +++| 00842 M00S00772.config +++| KEYWORD CH=,CHP 00843 M00S00773.config +++| SX0 3 VALIDATE CHANNEL NUMBER 00844 M00S00774.config +++| RJ VON 00845 M00S00775.config +++| NZ X5,CHPX IF ERROR
| Line S00003 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 00846 M01S00003.ns2550 +++| SX0 1S11 ACCESS PATH ENABLED FLAG 00847 M01S00004.ns2550 +++| SX2 X6 00848 M01S00005.ns2550 +++| BX6 X0+X6
| Line S00006 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
M02 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00849 M02S00006.confi4 ---| LX6 12
| Line S00776 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00850 M01S00776.confi4 ---| SA6 CHPA SAVE CHANNEL 00851 M00S00777.config +++| 00852 M00S00778.config +++|* CHECK THAT CHANNELS ARE AVAILABLE. 00853 M00S00779.config +++|
| Line S00780 Modification History | |
|---|---|
M01 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 00854 M01S00780.ns2550 ---| SX2 X6 00855 M00S00781.config +++| RJ CHA 00856 M00S00782.config +++| NZ X5,CHPX IF ERROR IN CHANNEL NUMBER
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00857 M01S00001.confi4 +++| PL X1,CHP1 IF CHANNEL IS UP 00858 M01S00002.confi4 +++| SX0 3000B MARK CHANNEL DOWN 00859 M01S00003.confi4 +++| BX6 X0+X6 00860 M01S00004.confi4 +++| CHP1 LX6 12 SAVE CHANNEL 00861 M01S00005.confi4 +++| SA6 CHPA 00862 M00S00783.config +++| 00863 M00S00784.config +++|* CHECK FOR SECOND CHANNEL. 00864 M00S00785.config +++| 00865 M00S00786.config +++| SX0 3 00866 M00S00787.config +++| RJ VON 00867 M00S00788.config +++| NZ X5,CHPX IF ERROR
| Line S00789 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00868 M01S00789.confi4 ---| ZR X4,CHP1 IF NO SECOND CHANNEL
| Line S00006 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00869 M01S00006.confi4 +++| ZR X4,CHP3 IF NO SECOND CHANNEL
| Line S00790 Modification History | |
|---|---|
M01 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 00870 M01S00790.ns2550 ---| ZR X6,CHP1 IF SECOND CHANNEL ZERO
| Line S00007 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 00871 M01S00007.ns2550 +++| SX0 1S11 ACCESS PATH ENABLED FLAG 00872 M00S00791.config +++| SA1 CHPA SAVE CHANNEL NUMBER
| Line S00792 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00873 M01S00792.confi4 ---| SX2 X6
| Line S00007 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00874 M01S00007.confi4 +++| SX2 X6+
| Line S00008 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 00875 M01S00008.ns2550 +++| BX6 X0+X6
| Line S00793 Modification History | |
|---|---|
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 00876 M01S00793.252l678 ---| LX6 6
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 00877 M02S00001.ns2550 ---| LX6 12 00878 M00S00794.config +++| BX6 X1+X6
| Line S00795 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00879 M01S00795.confi4 ---| SA6 A1 00880 M00S00796.config +++| RJ CHA 00881 M00S00797.config +++| NZ X5,CHPX IF ERROR IN CHANNEL NUMBER
| Line S00008 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00882 M01S00008.confi4 +++| PL X1,CHP2 IF CHANNEL IS UP 00883 M01S00009.confi4 +++| SX0 3000B MARK CHANNEL DOWN 00884 M01S00010.confi4 +++| BX6 X0+X6
| Line S00798 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00885 M01S00798.confi4 ---| CHP1 SA1 B1RM+ESTD INSERT CHANNELS IN REPLACEMENT ENTRY
| Line S00011 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00886 M01S00011.confi4 +++| CHP2 SA6 CHPA SAVE CHANNEL 00887 M01S00012.confi4 +++| CHP3 SA1 B1RM+ESTD INSERT CHANNELS IN REPLACEMENT ENTRY 00888 M00S00799.config +++| SA2 CHPA
| Line S00800 Modification History | |
|---|---|
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 00889 M01S00800.252l678 ---| MX0 12 00890 M01S00801.252l678 ---| LX2 36
| Line S00002 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 00891 M01S00002.252l678 +++| MX0 24 00892 M01S00003.252l678 +++| LX2 24 00893 M00S00802.config +++| LX0 -12
| Line S00803 Modification History | |
|---|---|
M01 (Removed by) | confi1a |
Seq # *Modification Id* Act ----------------------------+ 00894 M01S00803.confi1a ---| BX1 -X0*X1 CLEAR CHANNEL FIELD 00895 M01S00804.confi1a ---| BX6 X2+X1 00896 M01S00805.confi1a ---| BX1 X2+X1
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | confi1a |
Seq # *Modification Id* Act ----------------------------+ 00897 M01S00001.confi1a +++| BX6 -X0*X1 CLEAR CHANNEL FIELD 00898 M01S00002.confi1a +++| BX6 X2+X6 00899 M00S00806.config +++| SA6 A1 00900 M00S00807.config +++| RJ CCH CHECK FOR MATCHING CHANNELS
| Line S00808 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00901 M01S00808.confi4 ---| NZ X1,CHP2 IF AT LEAST ONE CHANNEL MATCHES
| Line S00013 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00902 M01S00013.confi4 +++| NZ X1,CHP4 IF AT LEAST ONE CHANNEL MATCHES 00903 M00S00809.config +++| 00904 M00S00810.config +++|* SET *URCD* TO INDICATE ALL UNITS CHANGED. 00905 M00S00811.config +++| 00906 M00S00812.config +++| SA1 B1RM+MSTD+DDLL GET UNIT COUNT 00907 M00S00813.config +++| AX1 48
| Line S00814 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00908 M01S00814.ns22000 ---| MX0 -6
| Line S00017 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00909 M01S00017.ns22000 +++| MX0 -3 00910 M00S00815.config +++| BX1 -X0*X1 00911 M00S00816.config +++| SB2 X1 00912 M00S00817.config +++| MX6 1 00913 M00S00818.config +++| AX6 B2 00914 M00S00819.config +++| SB2 B2+B1 00915 M00S00820.config +++| LX6 B2 00916 M00S00821.config +++| SA1 B1RM+URCD MERGE CHANGED UNITS 00917 M00S00822.config +++| BX6 X1+X6 00918 M00S00823.config +++| SA6 A1
| Line S00824 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00919 M01S00824.confi4 ---| CHP2 RJ SEQ SET EQUIPMENT PARAMETERS IN K-DISPLAY
| Line S00014 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 00920 M01S00014.confi4 +++| CHP4 RJ SEQ SET EQUIPMENT PARAMETERS IN K-DISPLAY 00921 M00S00825.config +++| BX5 X5-X5 CLEAR ERROR STATUS 00922 M00S00826.config +++| EQ CHPX RETURN 00923 M00S00827.config +++|
| Line S00042 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 00924 M01S00042.241l630 +++| 00925 M00S00828.config +++| CHPA CON 0 TEMPORARY 00926 M00S00829.config +++| TITLE EQP - *EQ* PARAMETER PROCESSOR. 00927 M00S00830.config +++|** EQP - *EQ* PARAMETER PROCESSOR. 00928 M00S00831.config +++|* ANY MASS STORAGE DEVICE IS ALLOWED FOR THIS COMMAND. 00929 M00S00832.config +++|* THIS IS BECAUSE DEVICE IDLE MAY BE SET FOR ANY MASS 00930 M00S00833.config +++|* STORAGE DEVICE. 00931 M00S00834.config +++|* 00932 M00S00835.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT. 00933 M00S00836.config +++|* (SPTR) = STRING BUFFER ADDRESS OF PREVIOUS CHARACTER. 00934 M00S00837.config +++|* (SLMP) = STRING BUFFER LIMIT POINTER. 00935 M00S00838.config +++|* 00936 M00S00839.config +++|* EXIT (X5) = 0 IF NO ERROR. 00937 M00S00840.config +++|* = ERROR MESSAGE ADDRESS IF ERROR. 00938 M00S00841.config +++|* (SPTR) = UPDATED STRING BUFFER POINTER. 00939 M00S00842.config +++|* K-DISPLAY UPDATED TO SHOW NEW EQUIPMENT. 00940 M00S00843.config +++|* 00941 M00S00844.config +++|* USES X - 0, 4, 5, 6. 00942 M00S00845.config +++|* A - 6. 00943 M00S00846.config +++|* B - 0. 00944 M00S00847.config +++|* 00945 M00S00848.config +++|* CALLS CLD, RSC, VON. 00946 M00S00849.config +++| 00947 M00S00850.config +++| 00948 M00S00851.config +++| KEYWORD EQ=,EQP
| Line S00852 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00949 M01S00852.ns22000 ---| SX0 3 VALIDATE EQUIPMENT NUMBER
| Line S00018 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00950 M01S00018.ns22000 +++| SX0 3+1 VALIDATE EST ORDINAL 00951 M00S00853.config +++| RJ VON 00952 M00S00854.config +++| NZ X5,EQPX IF ERROR 00953 M00S00855.config +++| ZR X4,EQP1 IF NO EQUIPMENT ENTERED 00954 M00S00856.config +++| SA6 B1RM+CUEQ SET EQUIPMENT 00955 M00S00857.config +++| EQP1 RJ CLD CHECK FOR LEGAL DEVICE 00956 M00S00858.config +++| NZ X5,EQP2 IF ERROR IN EQUIPMENT 00957 M00S00859.config +++| RJ RSC RESET PARAMETERS 00958 M00S00860.config +++| SX5 B0 00959 M00S00861.config +++| EQ EQPX RETURN 00960 M00S00862.config +++| 00961 M00S00863.config +++| EQP2 SX6 B0 CLEAR CURRENT EQUIPMENT
| Line S00864 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00962 M01S00864.ns22000 ---| SX5 EREN **** ERROR IN EQUIPMENT NUMBER.
| Line S00019 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 00963 M01S00019.ns22000 +++| SX5 EREN **** ERROR IN EST ORDINAL. 00964 M00S00865.config +++| SA6 B1RM+CUEQ 00965 M00S00866.config +++| RJ RSC RESET PARAMETERS 00966 M00S00867.config +++| EQ EQPX RETURN 00967 M00S00868.config +++| TITLE ULP - UNIT LIST PARAMETER PROCESSOR. 00968 M00S00869.config +++|** ULP - *UL=* PARAMETER PROCESSOR. 00969 M00S00870.config +++|* 00970 M00S00871.config +++|* ENTRY (CUEQ) = CURRENT EQUIPMENT. 00971 M00S00872.config +++|* 00972 M00S00873.config +++|* EXIT (MSTD) UPDATED WITH NEW UNIT LIST. 00973 M00S00874.config +++|* K-DISPLAY UPDATED WITH NEW CONFIGURATION. 00974 M00S00875.config +++|* 00975 M00S00876.config +++|* USES X - 0, 1, 2, 3, 4, 5, 6, 7. 00976 M00S00877.config +++|* A - 1, 6. 00977 M00S00878.config +++|* B - 3, 4, 5. 00978 M00S00879.config +++|* 00979 M00S00880.config +++|* CALLS SEQ, VON. 00980 M00S00881.config +++|* 00981 M00S00882.config +++|* MACRO KEYWORD. 00982 M00S00883.config +++| 00983 M00S00884.config +++| 00984 M00S00885.config +++| ULP8 SX5 ERUN **** ERROR IN UNIT LIST. 00985 M00S00886.config +++| 00986 M00S00887.config +++| KEYWORD UL=,ULP 00987 M00S00888.config +++| BX6 X6-X6 CLEAR ASSEMBLY 00988 M00S00889.config +++| PX6 X6 00989 M00S00890.config +++| SA6 ULPA 00990 M00S00891.config +++| ULP1 SX0 3 VALIDATE UNIT NUMBERS 00991 M00S00892.config +++| RJ VON 00992 M00S00893.config +++| NZ X5,ULPX IF ERROR IN ASSEMBLY 00993 M00S00894.config +++| ZR X4,ULP4 IF NO DIGITS 00994 M00S00895.config +++| SA1 ULPA 00995 M00S00896.config +++| UX1,B4 X1 00996 M00S00897.config +++| SB3 B4+B4 COMPUTE SHIFT COUNT FOR NEW UNIT 00997 M00S00898.config +++| SB3 B3+B4 00998 M00S00899.config +++| SB3 B3+B3 00999 M00S00900.config +++| SB4 B4+B1 01000 M00S00901.config +++| LX4 X6,B3 POSITION NEW UNIT 01001 M00S00902.config +++| BX6 X1+X4 01002 M00S00903.config +++| PX6 X6,B4 01003 M00S00904.config +++| SA6 ULPA 01004 M00S00905.config +++| SA2 B1RM+ESTD CHECK FOR 885 01005 M00S00906.config +++| MX0 -11 01006 M00S00907.config +++| LX2 -12 01007 M00S00908.config +++| BX2 -X0*X2 01008 M00S00909.config +++| SX3 X2-2RDM 01009 M00S00910.config +++| SX2 X2-2RDQ 01010 M00S00911.config +++| ZR X3,ULP2 IF 885 01011 M00S00912.config +++| NZ X2,ULP3 IF NOT 885 01012 M00S00913.config +++| ULP2 AX4 B3 CHECK NUMBER OF UNITS AND UNIT NUMBER 01013 M00S00914.config +++| SB3 3 01014 M00S00915.config +++| LX4 59-5 01015 M00S00916.config +++| GT B4,B3,ULP8 IF MORE THAN 3 UNITS 01016 M00S00917.config +++| PL X4,ULP8 IF UNIT NUMBER NOT 4X OR 5X 01017 M00S00918.config +++| LX4 59-4-59+5 01018 M00S00919.config +++| NG X4,ULP8 IF UNIT NUMBER NOT 4X OR 5X 01019 M00S00920.config +++| ULP3 SX1 B5-1R, 01020 M00S00921.config +++| ZR X1,ULP1 IF MORE UNITS 01021 M00S00922.config +++| SX1 B5-1R. 01022 M00S00923.config +++| SX5 ERIS **** ERROR IN SEPARATOR. 01023 M00S00924.config +++| NZ X1,ULPX IF NOT END OF LINE 01024 M00S00925.config +++| ULP4 SA1 ULPA BUILD DDLL WORD 01025 M00S00926.config +++| UX1,B4 X1 01026 M00S00927.config +++| ZR B4,ULP5 IF NULL EQUIPMENT 01027 M00S00928.config +++| SB4 B4-2000B 01028 M00S00929.config +++| ULP5 PX6 X6,B4 01029 M00S00930.config +++| SA1 B1RM+MSTD+DDLL 01030 M00S00931.config +++| SA6 A1 01031 M00S00932.config +++| MX0 -6 01032 M00S00933.config +++| MX3 1 INITIALIZE LOOP PARAMETERS 01033 M00S00934.config +++| BX4 X4-X4 01034 M00S00935.config +++| MX2 -8 LOOP COUNTER 01035 M00S00936.config +++| ULP6 ZR X2,ULP7 IF END OF LOOP 01036 M00S00937.config +++| BX7 X1-X6 01037 M00S00938.config +++| BX7 -X0*X7 01038 M00S00939.config +++| LX0 6 ADVANCE UNIT 01039 M00S00940.config +++| AX2 1 01040 M00S00941.config +++| LX3 1 01041 M00S00942.config +++| ZR X7,ULP6 IF NO CHANGE IN UNIT NUMBER 01042 M00S00943.config +++| BX4 X4+X3 01043 M00S00944.config +++| EQ ULP6 CHECK NEXT UNIT 01044 M00S00945.config +++| 01045 M00S00946.config +++| ULP7 SA1 B1RM+URCD MERGE BITS IN CALL BLOCK 01046 M00S00947.config +++| BX6 X1+X4 01047 M00S00948.config +++| SA6 A1 01048 M00S00949.config +++| RJ SEQ SET EQUIPMENT PARAMETERS IN DISPLAY 01049 M00S00950.config +++| EQ ULPX RETURN 01050 M00S00951.config +++|
| Line S00043 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01051 M01S00043.241l630 +++| 01052 M00S00952.config +++| ULPA CON 0 SCRATCH LOCATION 01053 M00S00953.config +++| URP TITLE URP - UNITS FOR RECABLING PARAMETER PROCESSOR. 01054 M00S00954.config +++|** URP - *UR=* PARAMETER PROCESSOR. 01055 M00S00955.config +++|* 01056 M00S00956.config +++|* ENTRY (URCD) = CURRENT LIST OF UNITS. 01057 M00S00957.config +++|* (MSTD) = CURRENT REDEFINITION PARAMETERS. 01058 M00S00958.config +++|* 01059 M00S00959.config +++|* EXIT (X5) = ERROR MESSAGE ADDRESS. 01060 M00S00960.config +++|* 01061 M00S00961.config +++|* USES X - 0, 1, 2, 3, 5, 6. 01062 M00S00962.config +++|* A - 1, 6. 01063 M00S00963.config +++|* B - 1, 2. 01064 M00S00964.config +++|* 01065 M00S00965.config +++|* CALLS VON. 01066 M00S00966.config +++|* 01067 M00S00967.config +++|* MACRO KEYWORD. 01068 M00S00968.config +++| 01069 M00S00969.config +++| 01070 M00S00970.config +++| URP2 SA1 B1RM+URCD ADD UNIT TO LIST 01071 M00S00971.config +++| BX6 X1+X3 01072 M00S00972.config +++| SA6 A1 01073 M00S00973.config +++| RJ SEQ SET EQUIPMENT PARAMETERS IN K-DISPLAY 01074 M00S00974.config +++| 01075 M00S00975.config +++| KEYWORD UR=,URP ENTRY/EXIT 01076 M00S00976.config +++| SX0 3 ASSEMBLE UNIT NUMBER 01077 M00S00977.config +++| RJ VON 01078 M00S00978.config +++| NZ X5,URPX IF ERROR IN ASSEMBLY 01079 M00S00979.config +++| 01080 M00S00980.config +++|* FIND UNIT IN CURRENT UNIT LIST. 01081 M00S00981.config +++| 01082 M00S00982.config +++| SA1 B1RM+MSTD+DDLL 01083 M00S00983.config +++| MX0 -6
| Line S00020 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01084 M01S00020.ns22000 +++| MX2 -3 01085 M00S00984.config +++| LX1 -48
| Line S00985 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01086 M01S00985.ns22000 ---| BX2 -X0*X1
| Line S00021 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01087 M01S00021.ns22000 +++| BX2 -X2*X1 01088 M00S00986.config +++| LX1 48 01089 M00S00987.config +++| SB2 X2 SET UNIT COUNT 01090 M00S00988.config +++| SX3 B1 SET UNIT MASK 01091 M00S00989.config +++| URP1 BX5 X6-X1 CHECK FOR UNIT NUMBER MATCH 01092 M00S00990.config +++| BX5 -X0*X5 01093 M00S00991.config +++| ZR X5,URP2 IF MATCH 01094 M00S00992.config +++| SB2 B2-B1 ADVANCE UNIT NUMBER 01095 M00S00993.config +++| AX1 6 01096 M00S00994.config +++| LX3 1 01097 M00S00995.config +++| PL B2,URP1 IF MORE UNITS TO CHECK 01098 M00S00996.config +++| SX5 ERUN **** ERROR IN UNIT LIST. 01099 M00S00997.config +++| EQ URPX RETURN 01100 M00S00998.config +++| TITLE UTILITY SUBROUTINES. 01101 M00S00999.config +++| ASC SPACE 4,20 01102 M00S01000.config +++|** ASC - ASSEMBLE CHARACTERS. 01103 M00S01001.config +++|* 01104 M00S01002.config +++|* ENTRY (SPTR) = STRING BUFFER ADDRESS OF PREVIOUS CHARACTER. 01105 M00S01003.config +++|* (SLMP) = STRING BUFFER LIMIT POINTER. 01106 M00S01004.config +++|* (X7) = 1 IF IGNORE LEADING ZEROES. 01107 M00S01005.config +++|* 01108 M00S01006.config +++|* EXIT (X4) = NUMBER OF CHARACTERS ASSEMBLED. 01109 M00S01007.config +++|* (X5) = RIGHT JUSTIFIED ASSEMBLED CHARACTERS. 01110 M00S01008.config +++|* (X6) = LEFT JUSTIFIED ASSEMBLED CHARACTERS. 01111 M00S01009.config +++|* (B5) = SEPARATOR. 01112 M00S01010.config +++|* (SPTR) = UPDATED STRING BUFFER ADDRESS. 01113 M00S01011.config +++|* 01114 M00S01012.config +++|* USES A - 1, 4, 6, 7. 01115 M00S01013.config +++|* X - 1, 2, 3, 4, 5, 6, 7. 01116 M00S01014.config +++|* B - 2, 3, 4, 5, 7. 01117 M00S01015.config +++| 01118 M00S01016.config +++| 01119 M00S01017.config +++|* PROCESS END OF BUFFER. 01120 M00S01018.config +++| 01121 M00S01019.config +++| ASC3 SA4 SLMP SET STRING BUFFER EMPTY 01122 M00S01020.config +++| SB2 X4+ 01123 M00S01021.config +++| SB5 1R. SET TERMINATOR 01124 M00S01022.config +++| 01125 M00S01023.config +++|* SET ASSEMBLED CHARACTERS. 01126 M00S01024.config +++| 01127 M00S01025.config +++| ASC4 SX4 10 CALCULATE NUMBER OF CHARACTERS 01128 M00S01026.config +++| SX3 B4 01129 M00S01027.config +++| IX4 X4-X3 01130 M00S01028.config +++| SX6 B2 SET BUFFER POINTER 01131 M00S01029.config +++| SA6 SPTR 01132 M00S01030.config +++| BX6 X6-X6 01133 M00S01031.config +++| ZR X4,ASCX IF NO CHARACTERS ASSEMBLED 01134 M00S01032.config +++| SX2 6 LEFT JUSTIFY CHARACTERS 01135 M00S01033.config +++| IX3 X3*X2 01136 M00S01034.config +++| SB4 X3 01137 M00S01035.config +++| LX6 X5,B4 01138 M00S01036.config +++| 01139 M00S01037.config +++| ASC SUBR ENTRY/EXIT 01140 M00S01038.config +++| SA7 ASCA INITIALIZE IGNORE ZEROES FLAG 01141 M00S01039.config +++| BX5 X5-X5 01142 M00S01040.config +++| SB4 10 01143 M00S01041.config +++| SA1 SPTR SET STRING POINTER 01144 M00S01042.config +++| SB2 X1 01145 M00S01043.config +++| SA1 SLMP SET MAXIMUM CHARACTER SCAN 01146 M00S01044.config +++| SB3 X1 01147 M00S01045.config +++| 01148 M00S01046.config +++|* ASSEMBLE CHARACTERS FROM BUFFER. 01149 M00S01047.config +++| 01150 M00S01048.config +++| ASC1 SB2 B2+B1 01151 M00S01049.config +++| GE B2,B3,ASC3 IF END OF STRING BUFFER 01152 M00S01050.config +++| SA1 B2 01153 M00S01051.config +++| SB5 X1 SET SEPARATOR 01154 M00S01052.config +++| SB7 X1-1R 01155 M00S01053.config +++| ZR B7,ASC1 IF BLANK 01156 M00S01054.config +++| SB7 X1-1R+ 01157 M00S01055.config +++| PL B7,ASC4 IF SEPARATOR 01158 M00S01056.config +++| SA4 ASCA 01159 M00S01057.config +++| ZR X4,ASC2 IF NOT TO IGNORE ZEROES 01160 M00S01058.config +++| SB7 X1-1R0 01161 M00S01059.config +++| ZR B7,ASC1 IF LEADING ZERO 01162 M00S01060.config +++| SX7 B0 CLEAR IGNORE ZEROES FLAG 01163 M00S01061.config +++| SA7 A4 01164 M00S01062.config +++| ASC2 LX5 6 ASSEMBLE CHARACTER 01165 M00S01063.config +++| SB4 B4-1 DECREMENT COUNT 01166 M00S01064.config +++| BX5 X5+X1 01167 M00S01065.config +++| NZ B4,ASC1 IF MORE CHARACTERS TO ASSEMBLE 01168 M00S01066.config +++| EQ ASC4 SET ASSEMBLED CHARACTERS 01169 M00S01067.config +++|
| Line S00044 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01170 M01S00044.241l630 +++| 01171 M00S01068.config +++| ASCA CON 0 IGNORE LEADING ZEROES FLAG 01172 M00S01069.config +++| BCL SPACE 4,20 01173 M00S01070.config +++|** BCL - BUILD CURRENT CONFIGURATION LIST. 01174 M00S01071.config +++|* 01175 M00S01072.config +++|* EXIT CURRENT MASS STORAGE CONFIGURATION ON OUTPUT. 01176 M00S01073.config +++|* 01177 M00S01074.config +++|* USES A - 1, 2. 01178 M00S01075.config +++|* X - 1, 2, 5, 6. 01179 M00S01076.config +++|*
| Line S01077 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01180 M01S01077.ns22000 ---|* CALLS BED, RMT.
| Line S00022 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01181 M01S00022.ns22000 +++|* CALLS BED, EST, RMT. 01182 M00S01078.config +++|* 01183 M00S01079.config +++|* MACROS CLOCK, DATE, GETLCW, WRITEC, WRITER. 01184 M00S01080.config +++| 01185 M00S01081.config +++| 01186 M00S01082.config +++| BCL2 WRITER O,R FLUSH BUFFER 01187 M00S01083.config +++| 01188 M00S01084.config +++| BCL SUBR ENTRY/EXIT
| Line S01085 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01189 M01S01085.ns22000 ---| SA2 ESTA READ EST 01190 M01S01086.ns22000 ---| GETLCW NMSD,X2,ESTB
| Line S00023 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01191 M01S00023.ns22000 +++| RJ EST READ EST INTO *ESTB* 01192 M00S01087.config +++| DATE BCLA+3 PUT DATE AND TIME IN HEADER 01193 M00S01088.config +++| CLOCK BCLA+4 01194 M00S01089.config +++| WRITEC O,BCLA WRITE HEADER 01195 M00S01090.config +++| WRITEC X2,BCLB WRITE DESCRIPTION LINE 01196 M00S01091.config +++| WRITEC X2,(=C* *) WRITE BLANK LINE 01197 M00S01092.config +++| 01198 M00S01093.config +++|* SEARCH FOR MASS STORAGE EQUIPMENTS. 01199 M00S01094.config +++|
| Line S01095 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01200 M01S01095.ns22000 ---| SX5 B0 01201 M01S01096.ns22000 ---| BCL1 SX5 X5+B1 NEXT EQUIPMENT 01202 M01S01097.ns22000 ---| SX6 X5-NMSD 01203 M01S01098.ns22000 ---| ZR X6,BCL2 IF END OF MASS STORAGE EQUIPMENTS 01204 M01S01099.ns22000 ---| SA1 ESTB+X5
| Line S00024 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01205 M01S00024.ns22000 +++| SX5 NOPE-1 INITIALIZE EST ORDINAL FOR SEARCH 01206 M01S00025.ns22000 +++| BCL1 SX5 X5+B1 INCREMENT EST ORDINAL 01207 M01S00026.ns22000 +++| SA1 LMSO 01208 M01S00027.ns22000 +++| IX1 X1-X5 01209 M01S00028.ns22000 +++| ZR X1,BCL2 IF END OF MASS STORAGE DEVICES 01210 M01S00029.ns22000 +++| R= X1,ESTE 01211 M01S00030.ns22000 +++| IX1 X5*X1 01212 M01S00031.ns22000 +++| SA1 ESTB+X1+EQDE READ EST ENTRY 01213 M00S01100.config +++| PL X1,BCL1 IF NOT MASS STORAGE 01214 M00S01101.config +++| RJ RMT READ MST 01215 M00S01102.config +++| RJ BED BUILD EQUIPMENT DISPLAY LINE 01216 M00S01103.config +++| WRITEC O,BEDB,BEDBL WRITE DISPLAY LINE TO BUFFER 01217 M00S01104.config +++| EQ BCL1 DISPLAY NEXT MS EQUIPMENT 01218 M00S01105.config +++|
| Line S00045 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01219 M01S00045.241l630 +++| 01220 M00S01106.config +++| BCLA DATA C*1 MASS STORAGE CONFIGURATION. 00/00/00. 00.00.00.* 01221 M00S01107.config +++| BCLB DATA C*0 ORD TYPE CHANNELS UNITS* 01222 M00S01108.config +++| BED SPACE 4,10 01223 M00S01109.config +++|** BED - BUILD EQUIPMENT DISPLAY LINE. 01224 M00S01110.config +++|* 01225 M00S01111.config +++|* ENTRY (X5) = EST ORDINAL. 01226 M00S01112.config +++|* (MSTB) = MST FOR EQUIPMENT. 01227 M00S01113.config +++|* 01228 M00S01114.config +++|* EXIT (BEDC) = DISPLAY LINE FOR EQUIPMENT. 01229 M00S01115.config +++|* (BEDB) = DISPLAY LINE PRECEDED BY BLANK WORD. 01230 M00S01116.config +++|* 01231 M00S01117.config +++|* USES A - 0, 1, 2, 3, 6. 01232 M00S01118.config +++|* X - 0, 1, 2, 3, 6. 01233 M00S01119.config +++|* B - 4, 5, 6, 7. 01234 M00S01120.config +++|*
| Line S01121 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01235 M01S01121.ns22000 ---|* CALLS S2L.
| Line S00032 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01236 M01S00032.ns22000 +++|* CALLS COD, S2L. 01237 M00S01122.config +++|* 01238 M00S01123.config +++|* MACROS MOVE. 01239 M00S01124.config +++| 01240 M00S01125.config +++| 01241 M00S01126.config +++| BED SUBR ENTRY/EXIT
| Line S01127 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01242 M01S01127.241l630 ---| MOVE KLNL-1,BEDA,BEDC
| Line S00046 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01243 M01S00046.241l630 +++| MOVE BEDAL,BEDA,BEDC
| Line S01128 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01244 M01S01128.ns22000 ---| SX1 X5 CONVERT EQUIPMENT NUMBER
| Line S00033 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01245 M02S00033.241l630 ---| SX1 X5 CONVERT EST ORDINAL
| Line S00047 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01246 M01S00047.241l630 +++| SX1 X5+ CONVERT EST ORDINAL 01247 M00S01129.config +++| NZ X5,BED1 IF NOT REDEFINITION EQUIPMENT 01248 M00S01130.config +++| SA1 B1RM+CUEQ 01249 M00S01131.config +++| BED1 SA0 BEDC DISPLAY WORD ADDRESS
| Line S01132 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01250 M01S01132.ns22000 ---| SB7 48 WORD POSITION 01251 M01S01133.ns22000 ---| RJ S2L SET TWO DIGITS IN LINE 01252 M01S01134.ns22000 ---| SA2 ESTB+X5 MERGE EQUIPMENT TYPE
| Line S00034 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01253 M01S00034.ns22000 +++| SX1 X1+1000B ENSURE THREE DIGITS 01254 M01S00035.ns22000 +++| RJ COD CONVERT EST ORDINAL 01255 M01S00036.ns22000 +++| MX1 -18 01256 M01S00037.ns22000 +++| BX6 -X1*X6 01257 M01S00038.ns22000 +++| SA2 A0 01258 M01S00039.ns22000 +++| LX1 42 POSITION MASK 01259 M01S00040.ns22000 +++| LX6 42 01260 M01S00041.ns22000 +++| BX2 X1*X2 01261 M01S00042.ns22000 +++| BX3 X2+X6 MERGE EST ORDINAL INTO LINE 01262 M01S00043.ns22000 +++| R= X2,ESTE 01263 M01S00044.ns22000 +++| IX2 X5*X2 01264 M01S00045.ns22000 +++| SA2 ESTB+X2+EQDE MERGE EQUIPMENT TYPE 01265 M00S01135.config +++| LX2 -12 01266 M00S01136.config +++| MX0 -11 01267 M00S01137.config +++| BX1 -X0*X2
| Line S01138 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01268 M01S01138.ns22000 ---| SA3 A0 READ DISPLAY WORD 01269 M00S01139.config +++| LX0 24 01270 M00S01140.config +++| BX3 X0*X3 01271 M00S01141.config +++| LX1 24 01272 M00S01142.config +++| BX6 X1+X3 01273 M00S01143.config +++| SA6 A0 01274 M00S01144.config +++| SA3 MSTB+DDLL MERGE UNIT COUNT
| Line S01145 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01275 M01S01145.ns22000 ---| MX0 -6
| Line S00046 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01276 M01S00046.ns22000 +++| MX0 -3 01277 M00S01146.config +++| LX3 -48 01278 M00S01147.config +++| BX1 -X0*X3 01279 M00S01148.config +++| LX3 59-58+48 01280 M00S01149.config +++| NG X3,BED2 IF NULL EQUIPMENT 01281 M00S01150.config +++| SX1 X1+B1 01282 M00S01151.config +++| BED2 SX6 X1+2R-0 01283 M00S01152.config +++| MX0 -12 01284 M00S01153.config +++| SB5 X1 SAVE UNIT COUNT FOR UNIT LIST PROCESSING 01285 M00S01154.config +++| LX0 12 01286 M00S01155.config +++| LX6 12 01287 M00S01156.config +++| SA3 A0 01288 M00S01157.config +++| BX3 X0*X3 01289 M00S01158.config +++| BX6 X6+X3 01290 M00S01159.config +++| SA6 A0 01291 M00S01160.config +++| SA0 A0+B1 NEXT DISPLAY WORD
| Line S01161 Modification History | |
|---|---|
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01292 M01S01161.252l678 ---| MX0 -5 MERGE CHANNELS IN DISPLAY LINE 01293 M01S01162.252l678 ---| LX2 -24
| Line S00004 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01294 M01S00004.252l678 +++| MX0 -6 MERGE CHANNELS IN DISPLAY LINE
| Line S00005 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01295 M02S00005.ns2550 ---| LX2 -12
| Line S00009 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01296 M01S00009.ns2550 +++| LX2 -24 01297 M00S01163.config +++| BX1 -X0*X2 01298 M00S01164.config +++| SB7 36 01299 M00S01165.config +++| RJ S2L
| Line S01166 Modification History | |
|---|---|
M01 (Removed by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01300 M01S01166.ns22000 ---| SA1 ESTB+X5 CONVERT SECOND CHANNEL
| Line S00047 Modification History | |
|---|---|
M01 (Added by) | ns22000 |
Seq # *Modification Id* Act ----------------------------+ 01301 M01S00047.ns22000 +++| R= X1,ESTE 01302 M01S00048.ns22000 +++| IX1 X5*X1 01303 M01S00049.ns22000 +++| SA1 ESTB+X1+EQDE CONVERT SECOND CHANNEL
| Line S01167 Modification History | |
|---|---|
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01304 M01S01167.252l678 ---| LX1 -42 01305 M01S01168.252l678 ---| MX0 -5
| Line S00006 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01306 M02S00006.ns2550 ---| LX1 -36
| Line S00010 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01307 M01S00010.ns2550 +++| LX1 -24
| Line S00007 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01308 M01S00007.252l678 +++| MX0 -6 01309 M00S01169.config +++| BX1 -X0*X1 01310 M00S01170.config +++| ZR X1,BED3 IF NO SECOND CHANNEL 01311 M00S01171.config +++| SB7 18 01312 M00S01172.config +++| RJ S2L SET SECOND CHANNEL IN DISPLAY WORD 01313 M00S01173.config +++| SA1 A0 INSERT COMMA 01314 M00S01174.config +++| SX6 1R,-1R 01315 M00S01175.config +++| LX6 30 01316 M00S01176.config +++| IX6 X1+X6 01317 M00S01177.config +++| SA6 A0 01318 M00S01178.config +++| BED3 SA0 A0+B1 NEXT DISPLAY WORD 01319 M00S01179.config +++| SB7 36 INITIALIZE UNIT POSITION IN DISPLAY WORD 01320 M00S01180.config +++| SB6 B0 LOGICAL UNIT NUMBER 01321 M00S01181.config +++| BED4 GE B6,B5,BED5 IF END OF UNITS 01322 M00S01182.config +++| SA1 MSTB+DDLL 01323 M00S01183.config +++| SB4 B6+B6 COMPUTE SHIFT COUNT 01324 M00S01184.config +++| SB4 B4+B6 01325 M00S01185.config +++| SB4 B4+B4 01326 M00S01186.config +++| AX1 B4 01327 M00S01187.config +++| MX0 -6 01328 M00S01188.config +++| BX1 -X0*X1 01329 M00S01189.config +++| RJ S2L SET UNIT NUMBER IN DISPLAY LINE 01330 M00S01190.config +++| SB6 B6+B1 INCREMENT UNIT COUNT 01331 M00S01191.config +++| SB7 B7-18 01332 M00S01192.config +++| PL B7,BED4 IF NOT NEW DISPLAY WORD 01333 M00S01193.config +++| SB7 B7+60 01334 M00S01194.config +++| SA0 A0+B1 01335 M00S01195.config +++| EQ BED4 NEXT UNIT 01336 M00S01196.config +++| 01337 M00S01197.config +++| BED5 SA1 MSTB+ACGL SET STATUSES IN DISPLAY LINE 01338 M00S01198.config +++| BX6 X6-X6 01339 M00S01199.config +++| LX1 59-11 01340 M00S01200.config +++| PL X1,BED6 IF NOT DEVICE IDLE 01341 M00S01201.config +++| SX6 1RI&1R-
| Line S01202 Modification History | |
|---|---|
M01 (Removed by) | 242l642 |
Seq # *Modification Id* Act ----------------------------+ 01342 M01S01202.242l642 ---| BED6 SA1 MSTB+DDLL
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | 242l642 |
Seq # *Modification Id* Act ----------------------------+ 01343 M01S00001.242l642 +++| BED6 SA1 MSTB+DALL 01344 M01S00002.242l642 +++| AX1 56 01345 M00S01203.config +++| LX6 6
| Line S01204 Modification History | |
|---|---|
M01 (Removed by) | 242l642 |
Seq # *Modification Id* Act ----------------------------+ 01346 M01S01204.242l642 ---| PL X1,BED7 IF NOT SUSPEND STATUS
| Line S00003 Modification History | |
|---|---|
M01 (Added by) | 242l642 |
Seq # *Modification Id* Act ----------------------------+ 01347 M01S00003.242l642 +++| SX2 3 01348 M01S00004.242l642 +++| BX1 X2-X1 01349 M01S00005.242l642 +++| NZ X1,BED7 IF NOT DOWN 01350 M00S01205.config +++| SX6 X6+1RS&1R- 01351 M00S01206.config +++| BED7 LX6 12 01352 M00S01207.config +++| 01353 M00S01208.config +++|* MERGE STATUS BITS IN DISPLAY LINE. 01354 M00S01209.config +++| 01355 M00S01210.config +++| SA1 BEDC+5 01356 M00S01211.config +++| LX6 18 01357 M00S01212.config +++| BX6 X1-X6 01358 M00S01213.config +++| SA6 A1 01359 M00S01214.config +++| EQ BEDX RETURN 01360 M00S01215.config +++|
| Line S01216 Modification History | |
|---|---|
M01 (Removed by) | confi3 |
Seq # *Modification Id* Act ----------------------------+ 01361 M01S01216.confi3 ---| BEDA DATA 64H 1. DQ CH00 UL=-- -- -- -- -- -- -- -- ST =
| Line S00002 Modification History | |
|---|---|
M01 (Added by) | confi3 |
M02 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01362 M02S00002.241l630 ---| BEDA DATA 64L 1. DQ CH00 UL=-- -- -- -- -- -- -- -- ST =
| Line S01217 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01363 M01S01217.241l630 ---|, ----
| Line S00048 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01364 M01S00048.241l630 +++| 01365 M01S00049.241l630 +++| BEDA DATA L* 1. DQ CH00 UL=-- -- -- -- -- -- -- -- ST = 01366 M01S00050.241l630 +++|,----* 01367 M01S00051.241l630 +++| BEDAL EQU *-BEDA 01368 M01S00052.241l630 +++| ERRNZ BEDAL+1-KLNL LINE LENGTH ERROR 01369 M00S01218.config +++| BEDB DATA 10H BLANK SPACING FOR OUTPUT
| Line S01219 Modification History | |
|---|---|
M01 (Removed by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01370 M01S01219.241l630 ---| BEDC BSS KLNL-1 DISPLAY LINE BUFFER 01371 M01S01220.241l630 ---| CON 0 END OF LINE FOR OUTPUT
| Line S00053 Modification History | |
|---|---|
M01 (Added by) | 241l630 |
Seq # *Modification Id* Act ----------------------------+ 01372 M01S00053.241l630 +++| BEDC BSS BEDAL DISPLAY LINE BUFFER 01373 M00S01221.config +++| BEDBL EQU *-BEDB LENGTH OF OUTPUT LINE 01374 M00S01222.config +++| CAE SPACE 4,10 01375 M00S01223.config +++|** CAE - CLEAR ALL EQUIPMENT IDLE STATUS. 01376 M00S01224.config +++|* 01377 M00S01225.config +++|* EXIT (X5) = ERROR MESSAGE ADDRESS. 01378 M00S01226.config +++|* = 0 IF NO EQUIPMENT FOUND. 01379 M00S01227.config +++|* 01380 M00S01228.config +++|* CALLS CLP, RRC. 01381 M00S01229.config +++| 01382 M00S01230.config +++| 01383 M00S01231.config +++| CAE SUBR ENTRY/EXIT 01384 M00S01232.config +++| CAE1 RJ RRC 01385 M00S01233.config +++| ZR X5,CAEX IF NO EQUIPMENT FOUND 01386 M00S01234.config +++| RJ CLP 01387 M00S01235.config +++| NZ X5,CAEX IF ERROR IN CLEAR REQUEST 01388 M00S01236.config +++| EQ CAE1 CHECK FOR NEXT EQUIPMENT 01389 M00S01237.config +++| CCH SPACE 4,10 01390 M00S01238.config +++|** CCH - CHECK FOR MATCHING CHANNELS. 01391 M00S01239.config +++|* 01392 M00S01240.config +++|* ENTRY (X1) = EST TO CHECK.
| Line S01241 Modification History | |
|---|---|
M01 (Removed by) | confi1 |
Seq # *Modification Id* Act ----------------------------+ 01393 M01S01241.confi1 ---|* (CUEQ) = CURRENT EQUIPMENT.
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | confi1 |
Seq # *Modification Id* Act ----------------------------+ 01394 M01S00001.confi1 +++|* (ESTD) = NEW EST ENTRY. 01395 M00S01242.config +++|* 01396 M00S01243.config +++|* EXIT (X1) = 0 IF NO CHANNEL MATCH. 01397 M00S01244.config +++|* 01398 M00S01245.config +++|* USES A - 2, 4. 01399 M00S01246.config +++|* X - 0, 1, 2, 3, 4. 01400 M00S01247.config +++|* B - 2. 01401 M00S01248.config +++| 01402 M00S01249.config +++| 01403 M00S01250.config +++| CCH SUBR ENTRY/EXIT
| Line S01251 Modification History | |
|---|---|
M01 (Removed by) | confi1 |
Seq # *Modification Id* Act ----------------------------+ 01404 M01S01251.confi1 ---| SA2 B1RM+CUEQ CURRENT EQUIPMENT 01405 M01S01252.confi1 ---| SA4 ESTB+X2
| Line S00002 Modification History | |
|---|---|
M01 (Added by) | confi1 |
Seq # *Modification Id* Act ----------------------------+ 01406 M01S00002.confi1 +++| SA4 B1RM+ESTD
| Line S01253 Modification History | |
|---|---|
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01407 M01S01253.252l678 ---| LX1 -36 01408 M01S01254.252l678 ---| LX4 -36 01409 M01S01255.252l678 ---| MX0 -5
| Line S00008 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01410 M01S00008.252l678 +++| LX1 -24
| Line S00009 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01411 M02S00009.ns2550 ---| LX4 -25
| Line S00011 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
M02 (Removed by) | confi1a |
Seq # *Modification Id* Act ----------------------------+ 01412 M02S00011.confi1a ---| LX4 36
| Line S00003 Modification History | |
|---|---|
M01 (Added by) | confi1a |
Seq # *Modification Id* Act ----------------------------+ 01413 M01S00003.confi1a +++| LX4 24
| Line S00010 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01414 M01S00010.252l678 +++| MX0 -6
| Line S01256 Modification History | |
|---|---|
M01 (Removed by) | confi1 |
Seq # *Modification Id* Act ----------------------------+ 01415 M01S01256.confi1 ---| BX2 -X0*X1 BUILD CHANNEL MASK FOR CURRENT EQUIPMENT
| Line S00003 Modification History | |
|---|---|
M01 (Added by) | confi1 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01416 M02S00003.ns2550 ---| BX2 -X0*X1 BUILD CHANNEL MASK FOR NEW EQUIPMENT
| Line S00012 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01417 M01S00012.ns2550 +++| BX3 -X0*X1 BUILD CHANNEL MASK FOR NEW EQUIPMENT
| Line S01257 Modification History | |
|---|---|
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01418 M01S01257.252l678 ---| LX1 -6
| Line S00011 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01419 M01S00011.252l678 +++| LX1 -12
| Line S01258 Modification History | |
|---|---|
M01 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01420 M01S01258.ns2550 ---| BX3 -X0*X1
| Line S00013 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01421 M01S00013.ns2550 +++| BX2 -X0*X1 01422 M00S01259.config +++| SX1 B1 01423 M00S01260.config +++| SB2 X2 01424 M00S01261.config +++| LX2 X1,B2 01425 M00S01262.config +++| SB2 X3 01426 M00S01263.config +++| ZR X3,CCH1 IF NO SECOND CHANNEL 01427 M00S01264.config +++| LX3 X1,B2 01428 M00S01265.config +++| BX2 X2+X3 01429 M00S01266.config +++| CCH1 BX3 -X0*X4 BUILD CHANNEL MASK FOR COMPARE EQUIPMENT 01430 M00S01267.config +++| SB2 X3
| Line S01268 Modification History | |
|---|---|
M01 (Removed by) | 252l678 |
Seq # *Modification Id* Act ----------------------------+ 01431 M01S01268.252l678 ---| LX4 -6
| Line S00012 Modification History | |
|---|---|
M01 (Added by) | 252l678 |
M02 (Removed by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01432 M02S00012.ns2550 ---| LX4 -12
| Line S00014 Modification History | |
|---|---|
M01 (Added by) | ns2550 |
Seq # *Modification Id* Act ----------------------------+ 01433 M01S00014.ns2550 +++| LX4 12 01434 M00S01269.config +++| LX3 X1,B2 01435 M00S01270.config +++| BX4 -X0*X4 01436 M00S01271.config +++| SB2 X4 01437 M00S01272.config +++| ZR X4,CCH2 IF NO SECOND CHANNEL 01438 M00S01273.config +++| LX4 X1,B2 01439 M00S01274.config +++| BX3 X3+X4 01440 M00S01275.config +++| CCH2 BX1 X2*X3 NON-ZERO IF ANY CHANNEL MATCHES 01441 M00S01276.config +++| EQ CCHX RETURN 01442 M00S01277.config +++| CHA SPACE 4,10 01443 M00S01278.config +++|** CHA - CHECK CHANNEL AVAILABLE. 01444 M00S01279.config +++|* 01445 M00S01280.config +++|* ENTRY (X2) = CHANNEL NUMBER. 01446 M00S01281.config +++|* (NPPU) = NUMBER OF PP-S. 01447 M00S01282.config +++|* 01448 M00S01283.config +++|* EXIT (X5) = 0 IF CHANNEL AVAILABLE. 01449 M00S01284.config +++|* = ERROR MESSAGE ADDRESS IF ERROR.
| Line S00015 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 01450 M01S00015.confi4 +++|* (X1) .LT. 0 IF CHANNEL AVAILABLE ((X5) = 0)) BUT DOWN.
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | confi5 |
Seq # *Modification Id* Act ----------------------------+ 01451 M01S00001.confi5 +++|* (X6) = RESTORED TO ENTRY VALUE. 01452 M00S01285.config +++|*
| Line S01286 Modification History | |
|---|---|
M01 (Removed by) | confi5 |
Seq # *Modification Id* Act ----------------------------+ 01453 M01S01286.confi5 ---|* USES A - 1, 5, 7. 01454 M01S01287.confi5 ---|* X - 1, 3, 4, 5, 7.
| Line S00002 Modification History | |
|---|---|
M01 (Added by) | confi5 |
Seq # *Modification Id* Act ----------------------------+ 01455 M01S00002.confi5 +++|* USES A - 1, 5, 6, 7. 01456 M01S00003.confi5 +++|* X - 1, 3, 4, 5, 6, 7. 01457 M00S01288.config +++|* B - 2, 3. 01458 M00S01289.config +++|* 01459 M00S01290.config +++|* MACROS GETLCW. 01460 M00S01291.config +++| 01461 M00S01292.config +++| 01462 M00S01293.config +++| CHA4 SX5 ERCN **** ERROR IN CHANNEL NUMBER. 01463 M00S01294.config +++| 01464 M00S01295.config +++| CHA SUBR ENTRY/EXIT 01465 M00S01296.config +++| SX7 13B SET UPPER CHANNEL OF LOWER BANK 01466 M00S01297.config +++| IX1 X7-X2 01467 M00S01298.config +++| BX5 X5-X5 SET CHANNEL AVAILABLE
| Line S01299 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 01468 M01S01299.confi4 ---| PL X1,CHAX IF CHANNEL IN LOWER BANK
| Line S00016 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 01469 M01S00016.confi4 +++| PL X1,CHA0 IF CHANNEL IN LOWER BANK 01470 M00S01300.config +++| SA1 NPPU NUMBER OF PP-S 01471 M00S01301.config +++| SX5 X1-11 01472 M00S01302.config +++| NG X5,CHA4 IF ONLY CHANNELS 0 - 13 01473 M00S01303.config +++| SX3 20B LOWER CHANNEL IN UPPER BANK 01474 M00S01304.config +++| SX4 33B UPPER CHANNEL IN UPPER BANK 01475 M00S01305.config +++| IX5 X2-X3 01476 M00S01306.config +++| NG X5,CHA4 IF NOT IN UPPER BANK 01477 M00S01307.config +++| IX5 X4-X2 CHECK UPPER LIMIT 01478 M00S01308.config +++| NG X5,CHA4 IF ERROR
| Line S01309 Modification History | |
|---|---|
M01 (Removed by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 01479 M01S01309.confi4 ---| BX7 X2 SAVE CHANNEL NUMBER
| Line S00017 Modification History | |
|---|---|
M01 (Added by) | confi4 |
Seq # *Modification Id* Act ----------------------------+ 01480 M01S00017.confi4 +++| CHA0 BX7 X2 SAVE CHANNEL NUMBER 01481 M00S01310.config +++| SA7 CHAA
| Line S00004 Modification History | |
|---|---|
M01 (Added by) | confi5 |
Seq # *Modification Id* Act ----------------------------+ 01482 M01S00004.confi5 +++| BX7 X6 PRESERVE X6 01483 M00S01311.config +++| GETLCW 1,CHTP,CHTB 01484 M00S01312.config +++| BX2 X1 FWA OF CHANNEL STATUS TABLE
| Line S01313 Modification History | |
|---|---|
M01 (Removed by) | confi2 |
Seq # *Modification Id* Act ----------------------------+ 01485 M01S01313.confi2 ---| LX2 0-11
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | confi2 |
Seq # *Modification Id* Act ----------------------------+ 01486 M01S00001.confi2 +++| LX2 0-12 POSITION CHANNEL STATUS TABLE ADDRESS
| Line S00001 Modification History | |
|---|---|
M01 (Added by) | confi2a |
Seq # *Modification Id* Act ----------------------------+ 01487 M01S00001.confi2a +++| SX2 X2 01488 M00S01314.config +++| GETLCW CTALL,X2,CHTB
| Line S00005 Modification History | |
|---|---|
M01 (Added by) | confi5 |
Seq # *Modification Id* Act ----------------------------+ 01489 M01S00005.confi5 +++| BX6 X7 RESTORE X6 01490 M00S01315.config +++| SA5 CHAA DETERMINE CHANNEL TABLE WORD INDEX 01491 M00S01316.config +++| SB2 B0 01492 M00S01317.config +++| CHA1 SX5 X5-5 DIVIDE BY 5 LOOP 01493 M00S01318.config +++| NG X5,CHA2 IF DIVIDE COMPLETE 01494 M00S01319.config +++| SB2 B2+B1 01495 M00S01320.config +++| EQ CHA1 CONTINUE DIVIDE 01496 M00S01321.config +++| 01497 M00S01322.config +++| CHA2 SA1 CHTB+B2 01498 M00S01323.config +++| SB3 X5+6 01499 M00S01324.config +++| CHA3 LX1 12 POSITION CHANNEL BYTE
Proceed to Part 1
cdc/nos2.source/opl.opl871/deck/config.txt · Last modified: by 127.0.0.1