Retro1.org codex

*NOSEQ 
IPRINST
INSTALLATION PARAMETER ENTRIES.

USE + KEY TO SEE NEXT PAGE.

GO. WILL CONTINUE THE LOAD WITHOUT FURTHER DISPLAYS.
THE RIGHT BLANK KEY TOGGLES THE DISPLAY.

CERTAIN INSTALLATION PARAMETERS REFER TO THE JOB SERVICE
CLASS *SC* AND JOB ORIGIN TYPE *OT*.
*SC* MAY BE REPLACED BY THE FOLLOWING -
     BC  BATCH
     CT  COMMUNICATION TASK
     DI  DETACHED INTERACTIVE
     I0  INSTALLATION CLASS 0
     I1  INSTALLATION CLASS 1
     I2  INSTALLATION CLASS 2
     I3  INSTALLATION CLASS 3
     I4  INSTALLATION CLASS 4
     I5  INSTALLATION CLASS 5
     I6  INSTALLATION CLASS 6
     I7  INSTALLATION CLASS 7
     I8  INSTALLATION CLASS 8
     MA  MAINTENANCE
     NS  NETWORK SUPERVISOR
     RB  REMOTE BATCH
     SS  SUBSYSTEM
     SY  SYSTEM
     TS  INTERACTIVE

*OT* MAY BE REPLACED BY THE FOLLOWING -
     BC  BATCH
     IA  INTERACTIVE
     RB  REMOTE BATCH
     SY  SYSTEM

CLASS=OT,ALL.
CLASS=OT,NUL.
CLASS=OT,S1,S2,...,SN.
     SET THE SERVICE CLASSES THAT WILL BE ALLOWED FOR THE
     ORIGIN TYPE *OT*.  ANY ORIGIN TYPE MAY BE SELECTED
     EXCEPT *SY*.
     ALL = SET ALL SERVICE CLASSES EXCEPT *SS*
     NUL = CLEAR ALL SERVICE CLASSES
     SN = ANY SERVICE CLASS (*SC*) EXCEPT *SS*
COMLIB,UN,FM.
     ADD AN ENTRY TO THE COMMON LIBRARIES TABLE FOR
     FAMILY NAME *FM* AND USER NAME *UN*.
COMLIB,UN,FM,D.
     DELETE THE ENTRY FROM THE COMMON LIBRARIES TABLE FOR
     FAMILY NAME *FM* AND USER NAME *UN*.
CPM,S1=X1,S2=X2.
     ALTER CP MULTIPLIER TYPE *SN*.
     SN = 0 OR 1
     XN = 1 - 45B (INDEX TO VALUE)
CPTT=NNNN.
     SET CPU TRANSFER THRESHOLD FOR INDIRECT FILES TO *NNNN*.
     CPU TRANSFER IS DISABLED IF *NNNN* = 0.
     NNNN = 0-7777B (SECTOR COUNT).
CSM=CC.
     SET THE OPERATING SYSTEM CHARACTER SET MODE.
     CC = 63 - 63 CHARACTER SET
        = 64 - 64 CHARACTER SET
DEBUG.
     TOGGLES CONSOLE DEBUG STATUS.
DELAY,T1XXX,T2XXX,...,TNXXX.
     SET SCAN VALUE *TN* = XXX.
     TN = AR - PP AUTO RECALL DELAY (MILLISECONDS)
          CR - CPU PROGRAM RECALL DELAY (MILLISECONDS)
          JS - JOB SCHEDULER DELAY (SECONDS)
          JQ - QFT/EJT SCHEDULING DELAY (2**JQ SECONDS)
          MP - MEMORY PAD FOR *RSTM* (100B WORD BLOCKS)
DFPT=DTN.
     SET SYSTEM DEFAULT REMOVABLE PACK TYPE = DTN.
         DT = MASS STORAGE DEVICE TYPE.
         N = NUMBER OF SPINDLES IN DEVICE (1 - 8).
DSD,X,CCC-CCC
     SET INITIAL KEYBOARD COMMAND(S) = CCC-CCC IF DEADSTART
     LEVEL X IS SELECTED.
     X = 0-2.
DISABLE,OP.
DISABLE,SYS,CP.
ENABLE,OP.
ENABLE,SYS,CP.
     ENABLE OR DISABLE A SUBSYSTEM *SYS* OR AN OPTION *OP*.
     CP = CONTROL POINT WHERE SUBSYSTEM WILL RESIDE.
          -N TO SPECIFY CP RELATIVE TO THE SYSTEM CP.
     OP = ONE OF THE FOLLOWING OPTIONS
          ACS TAPE PF STAGING        PRIVILEGED ANALYST MODE
          AUTORESTART                PRIVILEGED RDF
          CARTRIDGE PF STAGING       PROBE
          DDP ROLLOUT PATH           REMOVABLE PACKS
          DISK VALIDATION            RESIDENT RDF
          ENGR                       SCP
          EXTENDED STACK PURGING     SCRSIM
          FLEXIBLE PARTITIONS        SECONDARY USER COMMANDS
          FORCED FORMATTING          SPINDOWN
          LOGGING                    SUBCP
          MASTER MSE                 SYSTEM DEBUG
          MASTER MSS                 TAPE PF STAGING
          MEMORY CLEARING            TMS
          MS VALIDATION              TRACE
          PF VALIDATION              USER EXTENDED MEMORY
     SYS = ONE OF THE FOLLOWING SUBSYSTEMS
          ATF - AUTOMATED TAPE FACILITY
          BIO - BATCHIO
          CDC - CYBER DATABASE CONTROL SYSTEM
          IAF - INTERACTIVE FACILITY
          MAG - MAGNET
          MAP - MAP III
          MCS - MESSAGE CONTROL SYSTEM
          MSS - MASS STORAGE SUBSYSTEM
          NAM - NETWORK ACCESS METHOD
          NJF - NETWORK JOB ENTRY FACILITY
          RBF - REMOTE BATCH FACILITY
          RDF - REMOTE DIAGNOSTIC FACILITY
          RHF - REMOTE HOST FACILITY
          SMF - SCREEN MANAGEMENT FACILITY
          SSF - SCOPE STATION FACILITY
          STM - STIMULATOR
          TAF - TRANSACTION FACILITY
          TLF - TIELINE FACILITY
EI=E1,E2,...,EN.
     SPECIFIES ACCEPTABLE EI (ENVIRONMENTAL INTERFACE)
     REVISION LEVELS.
     EN = 2 CHARACTER EI REVISION LEVEL
        = NULL, NO EI REVISION LEVEL VERIFICATION PERFORMED
KEYPM=CC.
     SET SYSTEM KEYPUNCH MODE.
     CC = 26 - O26 KEYPUNCH MODE
          29 - O29 KEYPUNCH MODE
LOCK.
     SETS CONSOLE LOCK STATUS.
MICRO=M1,M2,...,MN.
     SPECIFIES ACCEPTABLE MICROCODE NAMES.
     MN = 7 CHARACTER MICROCODE NAME
NAMIAF=NC.
     SET THE NUMBER (*NC*) OF NETWORK TERMINALS.
OQSH=LVL.
     SET THE OUTPUT QUEUE SPECIAL HANDLING LEVEL.
     LVL = ACCESS LEVEL NAME
PCLASS=S1,S2,...,S7.
     SET THE SERVICE CLASS ASSOCIATED WITH EACH PRIORITY LEVEL.
     SN = ANY SERVICE CLASS (*SC*) EXCEPT *SS*
QUEUE,SC,QT,Q1XXX,Q2XXX,...,QNXXX.
     SET QUEUE PRIORITIES *QN* = XXXX ASSOCIATED WITH
     QUEUE *QT* FOR SERVICE CLASS *SC*.
     QT = EX - EXECUTING   QN = IL - ORIGINAL PRIORITY
          IN - INPUT            IP - INITIAL PRIORITY
          OT - OUTPUT           LP - LOWER BOUND FOR PRIORITY
                                UP - UPPER BOUND FOR PRIORITY
                                WF - WEIGHTING FACTOR
SECCATS=C1,C2,...,CN.
     SET THE SECURITY ACCESS CATEGORIES THAT WILL BE ALLOWED IN
     A SECURE SYSTEM.
     CN = ACCESS CATEGORY NAME, *ALL* OR *NUL*
          ALL - ENABLE ALL ACCESS CATEGORIES
          NUL - DISABLE ALL ACCESS CATEGORIES
SECURES,OT,LA=LLVL,UA=ULVL.
     SET THE ACCESS LEVEL LIMITS FOR AN ORIGIN TYPE *OT*.  IF
     ORIGIN TYPE IS *SY*, SET THE ACCESS LIMITS FOR THE SYSTEM.
     LLVL = ACCESS LEVEL NAME FOR THE LOWER LIMIT
     ULVL = ACCESS LEVEL NAME FOR THE UPPER LIMIT
SERVICE,SC,P1XXX,P2XXX,...,PNXXX.
     SET JOB SERVICE PARAMETERS *PN* = XXXX, FOR
     SERVICE CLASS *SC*.
     PN = AM     MAXIMUM FL/100B FOR ALL JOBS
          CM     CENTRAL MEMORY TIME SLICE (SECONDS)
          CP     CONTROL POINT TIME SLICE PRIORITY
          CS     CUMULATIVE INDIRECT ACCESS FILE SIZE
          CT     CONTROL POINT TIME SLICE (SECONDS)
          DS     INDIVIDUAL DIRECT ACCESS FILE SIZE
          DT     SERVICE CLASS TO ASSIGN ON A DETACH
          EM     MAXIMUM XM FL/*UEBS* FOR ALL JOBS
          FC     NUMBER OF PERMANENT FILES ALLOWED
          FL     MAXIMUM FL/100B FOR ANY JOB
          FS     INDIVIDUAL INDIRECT ACCESS FILE SIZE
          NJ     MAXIMUM NUMBER OF JOBS
          PR     CPU PRIORITY
          RS     RECALL CPU SLICE (MILLISECONDS)
          SE     CPU SLICE EXTENSION (MILLISECONDS)
          TD     SUSPENSION TIMEOUT DELAY
          TP     INITIAL PRIORITY FOR ON LINE JOBS
          US     UNEXTENDED CPU SLICE (MILLISECONDS)
SPC,C1=LLL1,C2=LLL2.
     SET ASSUMED PRINT PAGE CHARGE (LINES PER PAGE).
     CN = 6 - 6 LINES PER INCH   8 - 8 LINES PER INCH
     LLLN = 20B-377B - LINES CHARGED PER PRINT PAGE
SPD=C.
     SET ASSUMED PRINT DENSITY ACCORDING TO *C*.
     C = 6 - 6 LINES PER INCH   8 - 8 LINES PER INCH
SPL=NNN.
     SET ASSUMED PAGE LENGTH ACCORDING TO *NNN*.
     NNN = 20B-377B - LINES PER PAGE
SPW=NNN.
     SET ASSUMED PAGE WIDTH ACCORDING TO *NNN*.
     NNN = 50B-210B - PAGE WIDTH
SRST=NNNN.
     SET SECONDARY ROLLOUT SECTOR THRESHOLD TO *NNNN*.
     NNNN = 0-7777B - SECTOR COUNT
TCVM=CC.
     SET ASSUMED MAGNETIC TAPE CONVERSION MODE.
     CC = AS - ASCII NINE-TRACK CONVERSION
          EB - EBCDIC NINE-TRACK CONVERSION
          US - ANSI (USASI) NINE-TRACK CONVERSION
TDEN=CC.
     SET ASSUMED TAPE DENSITY ACCORDING TO *CC*.
     TWO ENTRIES MAY BE MADE, ONE FOR MT AND ONE FOR NT.
     CC = LO - 200 CPI (MT)   HI - 556 CPI (MT)
          HD - 800 CPI (NT)   HY - 800 CPI (MT)
          PE - 1600 CPI (NT)  GE - 6250 CPI (NT)
TDTY=CC.
     SET ASSUMED TAPE DEVICE TYPE ACCORDING TO *CC*.
     CC = AT - ACS CARTRIDGE TAPE
          CT - CTS CARTRIDGE TAPE
          MT - SEVEN TRACK TAPE
          NT - NINE TRACK TAPE
UNLOCK.
     SETS CONSOLE UNLOCK STATUS.
VEBL=NNNN.
     SET MAXIMUM NUMBER OF TIMES EXCHANGE TO NOS/VE
     WILL BE BYPASSED DUE TO PENDING PP EXCHANGES.
     NNNN=0-7777B.  DEFAULT IS 0.
*WEOR
*WEOR