ibm:vm370-lib:cp:dmkrse.assemble_abs
Table of Contents
DMKRSE Abstract
Statistics
Type ASSEMBLE
Source Lines : 1,498
Fixes Applied : 8
Most Recent Version : Saturday, December 9, 1978
Last Fix ID : [R13713DK]
Synopsis
Module
DMKRSERR
Function
TO RETRY AND ATTEMPT RECOVERY FOR REAL UNIT RECORD DEVICE
IO ERRORS.
ALSO TO RECORD HARDWARE ENVIRONMENTAL DATA FOR A 3800.
Attributes
REENTRANT, PAGEABLE, CALLED VIA SVC FROM DMKRSPER
Operation
1. FIRST ERROR ENTRY - THE ADDRESS OF THE IO ERROR BLOCK
(IOERBLOK) IS LOCATED IN THE IOBLOK(IOBIOER). THE
ADDRESS OF THE IOERBLOK IS MOVED TO THE RDEVBLOK
(RDEVIOER) AND THE IOBIOER IS ZEROED. THE IOB RESTART
COUNT IS UPDATED BY ONE, AT THIS POINT THE STATISTICAL
DATA COUNTERS ARE UPDATED THEN THE IOERBLOK IS CHECKED
FOR THE TYPE OF ERROR.
THE STATISTICAL COUNTERS ARE UPDATED VIA A CALL TO
DMKIOEST. FOR A 3800 PRINTER, A PARAMETER LIST WILL
HAVE TO BE PASSED INDICATING WHICH COUNTERS TO UPDATE.
FOR ALL OTHER SPOOLING DEVICES NO PARAMETER IS PASSED.
2. RETRY ERROR ENTRY - THE ADDRESS OF THE FIRST ERROR
IOERBLOK IS LOCATED IN THE RDEVBLOK (RDEVIOER), AND
IN THE IOBLOK (IOBIOER), IF AN ERROR, WILL BE
THE ADDRESS OF THE NEW IOERBLOK. TWO TYES OF ENTRIES -
(A) DEVICE END INTERRUPT FROM OPERATOR INTERVENTION,
THE IOBLOK IS POSTED WITH THE RESTART FLAG AND
ALLOW IOS TO RESTART THE OPERATION.
(B) CHANNEL AND DEVICE END INTERRUPT FROM ERP
INITIATED CCW'S TO OBTAINED OBR INFORMATION.
3. CONDITION CODE 3 ON SIO - MARK THE IOBLOK
AS FATAL ERROR AND ALLOW IOS TO RETURN THE IOBLOK
TO THE USER.
4. CHANNEL CONTROL AND INTERFACE CONTROL CHECK -
TAKE APPROPIATE ACTION AS GROVEN BY THE TERMINATION
AND/OR SEQUENCE CODE IN THE EXTENDED CHANNEL STATUS
(ECSW). THE ACTION TAKEN IS DEVICE DEPENDENT AND IS AS
FOLLOWS.
CODE ACTION
(0) NO RETRY - THE DEVICE IS UNABLE TO RECOVERY FROM THIS
ERROR CONDITION. MARK THE ERROR AS FATAL AND
ALLOW IOS TO RETURN THE IOBLOK TO THE USER.
(4) RETRY ONCE - RETRY THE CCW AT WHICH THE ERROR
ACCURRED. IF RETRY FAILS, POST THE ERROR AS
FATAL AND ALLOW IOS TO RETURN THE IOBLOK TO THE
USER.
(8) IGNORE - TREAT THIS CONDITION AS COMPLETE WITHOUT
ERROR. RESTART THE OPERATION WITH THE NEXT CCW.
(12) RETRY WITH OPERATOR INTERVENTION - RETRY MAY BE
POSSIBLE WITH OPERATOR INTERVENTION. GIVE CHANNEL
ERROR ACTION MESSAGE AND RESTART THE OPERATION
WHEN OPERATOR INTERVENTION IS COMPLETE.
5. CHANNEL DATA CHECK - RETRY THE OPERATION ONCE,
IF RETRY FAILS, POST THE ERROR AS FATAL, AND
ALLOW IOS TO RETURN THE IOBLOK TO THE USER.
6. UNITCHECK ERRORS - RECOVERY PROCEDURES FOR UNITCHECK
ERRORS ARE DEVICE DEPENDENT, BUT GENERALLY SPEAKING, THE
FOLLOWING ACTIONS ARE TAKEN.-
(A) COMMAND REJECT - THE OPERATION IS MARK FATAL ERROR IN
THE IOBLOK, ERROR MESSAGE DMKRSE500I IS ISSUED
AND ALLOW IOS TO RETURN THE IOBLOK TO THE USER.
(B) INTERVENTION REQUIRED - ONE OF TWO ACTIONS IS TAKEN,
DEPENDENT ON THE DEVICE TYPE.
(1) OPERATOR INTERVENTION - LOCATE THE RESTART CCW
ADDRESS AND STORE IN IOBRCAW. CALL DMKMSWR
TO GIVE ERROR MESSAGE DMKRSE501A (INT REQ),
RETURN TO IOS WITH IOBERP SET, INDICATING
DEVICE END INTERRUPT PENDING FROM DEVICE.
WHEN DEVICE END INTERRUPT IS RECEIVED, THE
OPERATION IS RESTARTED AT THE CCW ADDRESS
LOCATED IN IOBRCAW.
(2) FATAL ERROR - OPERATION FOR WHICH INTERVENTION
REQUIRED IS FATAL, SUCH AS LOADBUF COMMAND, POST
IOBLOK AS FATAL, GIVE ERROR MESSAGE DMKRSE501I
(INT REQ) AND ALLOW IOS TO RETURN THE IOBLOK TO
THE USER.
(C) BUSOUT CHECK - THE OPERATION IS RETRYED ONCE, IF THE
RETRY FAILS, GIVE ERROR MESSAGE DMKRSE502I, POST
ERROR AS FATAL AND ALLOW IOS TO RETURN THE IOBLOK
TO THE USER.
(D) EQUIPMENT CHECK - ONE OF THREE ACTIONS WILL BE
TAKEN. (DEVICE DEPENDENT)
(1) EQUIPMENT CHECKS REQUIRING OPERATOR INTERVENTION,
LOCATE THE RESTART CCW, STORE ITS ADDRESS
IN IOBRCAW. GIVE ERROR MESSAGE DMKRSE503A (EQUIP
CK), RETURN TO IOS WITH IOBERP FLAG SET, TO
WAIT FOR DEVICE END INTERRUPT FROM THE
DEVICE. WHEN DEVICE END INTERRUPT IS
RECEIVED FROM OPERATOR INTERVENTION
COMPLETE, INDICATE RESTART AND ALLOW
TO RESTART THE OPERATION.
(2) RETRY ONCE - EQUIPMENT CHECKS NOT REQUIRING
OPERATOR INTERVENTION AND CAN BE RETRYED.
LOCATE AND SET UP THE RESTART CCW ADDRESS
FOR THE FAILING CCW, RETURN TO IOS TO
RESTART THE OPERATION. IF RETRY FAILS,
GIVE ERROR MESSAGE DMKRSE503I (EQUIP CK),
POST THE ERROR AS FATAL AND RETURN THE
IOBLOK TO THE USER VIA IOS.
(3) FATAL EQUIPMENT CHECKS - EQUIPMENT CHECKS
WHICH CAN NOT BE RETRYED OR NEED
OPERATOR INTERVENTION, POST THE ERROR AS
FATAL, GIVE ERROR MESSAGE DMKRSE503I AND
ALLOW IOS TO RETURN THE IOBLOK TO THE USER.
(E) DATA CHECKS - DEVICE DEPENDENT - DATA CHECKS
REQUIRING OPERATOR INTERVENTION, SET UP
RESTART CCW ADDRESS, GIVE MESSAGE DMKRSE504A, AND
RETURN TO IOS TO WAIT FOR DEVICE END INTERRUPT.
WHEN DEVICE END INTERRUPT IS RECEIVED FROM
OPERATOR INTERVENTION COMPLETE, RETURN TO IOS
ALLOW IOS TO RESTART THE OPERATION.
DATA CHECKS NOT REQUIRING OPERATOR INTERVENTION,
SET UP THE RESTART CCW ADDRESS, RETRY THE
OPERATION, IF RETRY FAILS, POST THE ERROR AS
FATAL, GIVE ERROR MESSAGE DMKRSE504I (DATA CK)
AND ALLOW IOS TO RETURN THE IOBLOK TO THE USER.
(F) BUFFER PARITY CHECK - LOCATE THE RESTART CCW
ADDRESS, RETRY THE OPERATION ONCE, IF
REQUIRED (DEVICE DEPENDENT), OTHERWISE POST
ERROR AS FATAL, GIVE ERROR MESSAGE DMKRSE529I
(PARITY CK) AND ALLOW IOS TO RETURN THE
IOBLOK TO THE USER.
(G) PROGRAM CONTROLLED INTERRUPT AND PROTECTION CHECKS
POSTED AS FATAL ERROR, GIVE ERROR MESSAGE
DMKRSE520I (CHAN ERROR) AND ALLOW IOS
TO RETURN THE IOBLOK TO THE USER.
(H) ERRORS NOT STATED OR EXCEPTION WILL BE GIVEN BY
DEVICE TYPE.
(I) 2501 READER -
OVERRUN CHECK - LOCATE THE RESTART CCW ADDRESS,
GIVE ERROR ACTION MESSAGE DMKRSE505A (OVERRUN
CK), RETURN TO IOS TO WAIT FOR OPERATOR
INTERVENTION. WHEN OPERATOR INTERVENTION IS
COMPLETE, RETURN TO IOS TO RESTART THE DEVICE.
(J) 1403-1443-3211-3203 PRINTERS
CHANNEL 9 - LOCATE THE NEXT CCW ADDRESS
AND RETURN TO IOS TO RESTART THE DEVICE.
(K) 2520-2540 PUNCHES
EQUIPMENT CHECKS - THE CCW ADDRESS IS LOCATED
TO REPUNCH THE LAST TWO CARDS ON THE FIRST
EQUIPMENT CHECK, RESTART THE OPERATION, IF RETRY
FAILS, RETRY THE FAILING CCW, AFTER 20
CONSECUTIVE RETRIES, POST ERROR AS FATAL,
GIVE ERROR MESSAGE DMKRSE503I (EQUIP CK) AND ALLOW
IOS TO RETURN THE IOBLOK TO THE USER.
(L) 3505 READER
FORMAT CHECK - THIS ERROR SHOULD NOT
ACCURR SINCE SPOOLING DOES NOT USE OMR OR RCE,
POST THE ERROR AS FATAL, GIVE ERROR MESSAGE
DMKRSE525I (FORMAT CK), AND ALLOW IOS TO
RETURN THE IOBLOK TO THE USER.
(M) 3505 READER AND 3525 PUNCH -
PERMANENT ERROR CHECK - THE OPERATOR HAS
PRESSED THE PERMANENT ERROR KEY AND MAKE THE
DEVICE READY. POST THE ERROR AS FATAL,
GIVE ERROR MESSAGE DMKRSE508I (PERM CK), AND
ALLOW IOS TO RETURN THE IOBLOK TO THE USER.
(N) 3211 PRINTER
CANCEL KEY - POST THE ERROR AS FATAL, GIVE
ERROR MESSAGE DMKRSE503I (EQUIP CK), AND ALLOW
IOS TO RETURN THE IOBLOK TO THE USER.
OUTBOARD RECORDING DATA - THE STANDARD UNIT CHECK
RECORD IS RECORDED ON THE IO ERROR RECORDING
CYLINDER BY DMKIOE VIA DMKIOS. ADDITIONAL
INFORMATION IS REQUIRED FOR CERTAIN ERROR
CONDITIONS.
1. THE CONTENTS OF THE FCB BUFFER.
2. THE CONTENTS OF THE UCS BUFFER.
3. THE CHECK DATA FOR THE PRINT LINE BUFFER.
4. THE CONTENTS OF THE PRINT LINE BUFFER.
5. THE FIRST TEN CHARACTERS IN ERROR.
THE INFORMATION IS OBTAINED AND STORED
IN THE OBR3211 EXTENTION OF THE IOERBLOK.
(O) 3203 PRINTER
CANCEL KEY - NONE EXISTS ON THIS PRINTER.
OUTBOARD RECORDING DATA - SAME AS 3211
PRINTER (ABOVE)
(P) 3800 PRINTING SUBSYSTEM
CANCEL KEY - SAME AS FOR A 3211
INTERVENTION REQD - ISSUE MESSAGE DMKRSE242I VIA
CALL TO DMKERMSG. IF 'SYSTEM RESTART' IS
ALSO INDICATED DO THAT FUNCTION AND THEN
RETURN TO IOS WITH IOBERP SET.
SYSTEM RESTART REQUIRED - THIS INDICATES THAT
THE PAGE BUFFER HAS POSSIBLY BEEN DESTROYED.
ISSUE MESSAGE DMKRSE255I SHOWING THE PAGE
BACKUP COUNT AND HOLD AND REQUEUE EACH
FILE ON THE DELAYED PURGE QUEUE ISSUING
DMKRSE252I FOR EACH ONE SO REQUEUED
EQUIPMENT CHECK (INTERNAL ERROR LOG FULL) -
CALL DMKRSESD TO DO THE 'SENSE ERROR LOG'
WHICH WILL CLEAR THE EQUIPMENT CHECK AND
THEN RESTART THE CCW CHAIN.
LOAD CHECK - IF IT IS AN FCB-FORMST MISMATCH,
AND DMKTCS IS IN CONTROL, INDICATE THAT FACT
BY PLACING 'FCBM' IN IOBMISC2. IF ANY OTHER
CHECK INDICATING BAD LOAD MODULES, PLACE
'BADM' IN IOBMISC2. OTHERWISE IGNORE LD CHK.
OUTBOARD RECORDING DATA - SAME AS 3211
00 - INTERFACE DISCONNECT
01 - STOP OR STACK OR NORMAL TERMINATION
10 - SELECTIVE RESET
11 - SYSTEM RESET
8. SEQUENCE CODE BITS 5,6 AND 7 OF BYTE 3
000 - A CHANNEL DETECTED ERROR ACCURRED DURING THE
OF A TEST I/O INSTRUCTION.
001 - COMMAND OUT WITH A NON-ZERO COMMAND BYTE
ON BUS OUT HAS BEEN SENT BY THE CHANNEL,
BUT DEVICE STATUS HAS NOT YET BEEN ANALYZED
BY THE CHANNEL.
010 - THE COMMAND HAS BEEN ACCEPTED BY THE DEVICE BUT NO
DATA HAS BEEN TRANSFERRED.
011 - AT LEAST ONE BYTE OF DATA HAS BEEN TRANSFERRED
OVER THE INTERFACE.
100 - THE COMMAND IN THE CURRENT CCW HAS EITHER NOT YET
BEEN SENT TO THE DEVICE OR ELSE WAS SENT BUT NOT
ACCEPTED BY THE DEVICE.
101 - THE COMMAND HAS BEEN ACCEPTED, BUT DATA TRANSFER IS
UNPREDICTABLE.
110 - RESERVED.
111 - RESERVED.
Calls to Other Routines
DMKMSWR - TO WRITE ERROR MESSAGES
DMKFRET - TO RETURN STORAGE
DMKIOEST - TO UPDATE STATISTICAL COUNTERS
DMKIOESD - FORMAT 3800 HARDWARE ENVIRONMENTAL COUNTERS
DMKERMSG - SEND MESSAGES TO THE OPERATOR
DMKIOSQR - TO DO THE BUFFER UNLOAD FOR A 3800
DMKIOESD - RECORD RESULTS OF BUFFER UNLOAD FOR FE
DMKCVTBH - CONVERT ERROR MESSAGE DATA TO PRINTABLE HEX
ibm/vm370-lib/cp/dmkrse.assemble_abs.txt · Last modified: 2023/08/06 13:37 by Site Administrator